How to Service the Front Brake Disc on Chrysler Voyager?

You should first lift the vehicle using either jackstands or a hoist designed for frame contact. After removing the wheel, remove the two bolts that join the disc brake caliper adapter to the brake caliper. Remove the caliper and adapter from the steering knuckle as one and then hang it safely out of the way using wire or a bungee cord, keeping the brake hose from stretching excessively. After that, take out the clips from the wheel mounting studs and carefully pull the brake disc from the hub. First, put the brake disc back on the hub and bearing and place the brake caliper and adapter over the disc, lining up the adapter with the bolt holes in the steering knuckle. Place the adapter onto the steering knuckle and hold it in place with the two bolts. Tighten the bolts to 169 Nm (125 ft. lbs.) torque. Find and install the wheel and tire assembly, then begin fastening the lug nuts in a specified sequence to a half tightness level and follow the same sequence to get the full specified torque of 135 Nm (100 ft. lbs.). Pull your car to the ground in reverse, lowering its body.

Should You Reface the Brake Disc with Every Brake Pad Replacement on Chrysler Voyager?

While replacing brake pads, technicians should reface the brake disc when it is damaged badly, has a warped surface or if it causes pulses or noisy braking. To reface properly, it's better to use a hub-mounted on-car brake lathe, since it reduces runout by trueing the disc to the vehicle's hub and bearing. Castings on un-machined disc surfaces show what the minimum acceptable thickness is and it is essential not to machine the disc below that value. Before fixing anything in place, look for any signs of chips, rust or dirt on the disc and the hub adapters. When working with a brake lathe, don't make adjustments and machine both halves of the disc to avoid any warping. Since the TIR and thickness values must remain within limits, operators must exercise extreme caution when using disc turning equipment during refacing work.

OEM Chrysler Voyager Brake Disc

Disc Rotor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

10 Brake Discs found

View related parts
Chrysler Voyager Rotor, Front Part Number: 4721830AC
$120.59 MSRP: $221.00
You Save: $100.41 (46%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rotor - Brake; Disc Brake Rotor, Front; Disc Brake Hardware Kit; Disc Brake Rotor; Brake Rotor; Brake Disc
- Position: Front
- Replaces: 5019981AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2003 Chrysler Voyager | Base, Ec, LX | 4 Cyl 2.4 L GAS, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS
View related parts
Chrysler Voyager Rotor, Front Part Number: 4779712AB
$99.30 MSRP: $152.00
You Save: $52.70 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rotor - Brake; Disc Brake Rotor, Front; Disc Brake Hardware Kit; Rotor Brake Front; Disc Brake Rotor; Brake Rotor
- Position: Front
- Replaces: 4779712AA, 68192969AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2020-2025 Chrysler Voyager | L, LX, LXi | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Chrysler Voyager Rotor Part Number: 4721820AE
$85.28 MSRP: $188.00
You Save: $102.72 (55%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rotor - Brake; Disc Brake Hardware Kit; Disc Brake Rotor; Brake Rotor; Brake Disc; Rotor Brake
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2000 Chrysler Voyager | Base, SE | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS
View related parts
Chrysler Voyager Rotor, Rear Part Number: 68223507AB
$45.18 MSRP: $113.00
You Save: $67.82 (61%)
ADD TO CART
Product Specifications
- Other Name: Rotor - Brake; Disc Brake Rotor, Rear; Rotor Brake Rear; Brake Rotor
- Position: Rear
- Replaced by: 68223507AC
- Replaces: 68223507AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2020-2025 Chrysler Voyager | L, LX, LXi | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Chrysler Voyager Rotor, Front Part Number: 4721820AG
$138.13 MSRP: $207.00
You Save: $68.87 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rotor - Brake; Disc Brake Rotor, Front; Disc Brake Hardware Kit; Brake Disc; Rotor Brake; Disc Brake Rotor; Brake Rotor
- Position: Front
- Replaces: 4721820AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2003 Chrysler Voyager | Base, Ec, LX | 2.4L L4, 3.3L V6, 4 Cyl 2.4 L GAS, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS
View related parts
Chrysler Voyager Rotor, Front Part Number: 68280438AB
$164.29 MSRP: $246.00
You Save: $81.71 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rotor - Brake; Disc Brake Rotor, Front; Disc Brake Hardware Kit; Brake Rotor
- Position: Front
- Replaced by: 68280438AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2020-2025 Chrysler Voyager | L, LX, LXi | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Chrysler Voyager Rotor - Brake Part Number: 68227781AC
$173.35 MSRP: $260.00
You Save: $86.65 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: ROTOR-BRAKE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2020-2024 Chrysler Voyager | L, LX, LXi | 3.6L V6, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Chrysler Voyager Rotor - Brake Part Number: 68420068AB
$101.04 MSRP: $157.00
You Save: $55.96 (36%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: ROTOR-BRAKE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2020-2025 Chrysler Voyager | L, LX, LXi | 3.6L V6, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Chrysler Voyager Rotor, Rear Part Number: 4721023AG
$62.94 MSRP: $94.10
You Save: $31.16 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Disc - Brake; Disc Brake Rotor, Rear; Disc Brake Rotor; Brake Rotor
- Position: Rear
- Replaces: 4721023AE, 4721023AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2000-2003 Chrysler Voyager | Base, Ec, LX, SE | 2.4L L4, 3.3L V6, 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS
View related parts
Chrysler Voyager Rotor Part Number: 4683259AC
Product Specifications
- Other Name: Rotor - Brake; Disc Brake Hardware Kit; Brake Rotor
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2000 Chrysler Voyager | Base, SE | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS

Chrysler Voyager Brake Disc

Choose OEM Brake Disc that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each Brake Disc follows strict manufacturing steps to lock in quality and fit. If your Chrysler Voyager matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Voyager parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Chrysler Voyager Brake Disc is a recommendation that is crucial in as far as the Chrysler Voyager vehicles dependable and effective performance is concerned. Featuring the most qualitative brake disc material and combined with the finest brake pads this Brake Disc kit is designed for the Chrysler Voyager to improve its performance and safety. As was mentioned, this kit fits different models of the Chrysler Voyager and it usually contains rather reputable brake discs and pads as the components which are necessary to return and preserve the proper level of braking. The brake pads are manufactured from high friction material, thus are designed to be long lasting and to provide optimum braking effect at various driving conditions. However, the kit also includes usually other hardware parts like clips, springs, and shims that are so vital for even wear and the correct functioning of the Brake Disc. This kind of attention is not only beneficial in making the parts to last longer, but also helps make the Chrysler Voyager to be safer as well. Additional attributes, for example, harnessing aptitude which includes towing or high temp driving makes or mar the Chrysler Voyager Brake Disc in the automotive marketplace. Due to the fine reputation that the Chrysler Voyager Brake Disc has earned, any Chrysler Voyager owner will find it essential in keeping the brake system of the car functional, efficient and safe.

Chrysler Voyager Brake Disc Parts and Q&A

Rotor, Front
4721820AG
Q: How to Service the Front Brake Disc on Chrysler Voyager?
A:
You should first lift the vehicle using either jackstands or a hoist designed for frame contact. After removing the wheel, remove the two bolts that join the disc Brake Caliper adapter to the brake caliper. Remove the caliper and adapter from the Steering Knuckle as one and then hang it safely out of the way using wire or a bungee cord, keeping the brake hose from stretching excessively. After that, take out the clips from the wheel mounting studs and carefully pull the brake disc from the hub. First, put the brake disc back on the hub and bearing and place the brake caliper and adapter over the disc, lining up the adapter with the bolt holes in the steering knuckle. Place the adapter onto the steering knuckle and hold it in place with the two bolts. Tighten the bolts to 169 Nm (125 ft. lbs.) torque. Find and install the wheel and tire assembly, then begin fastening the lug nuts in a specified sequence to a half tightness level and follow the same sequence to get the full specified torque of 135 Nm (100 ft. lbs.). Pull your car to the ground in reverse, lowering its body.
Rotor, Front
4721830AC
Q: Should You Reface the Brake Disc with Every Brake Pad Replacement on Chrysler Voyager?
A:
While replacing Brake Pads, technicians should reface the brake disc when it is damaged badly, has a warped surface or if it causes pulses or noisy braking. To reface properly, it's better to use a hub-mounted on-car brake lathe, since it reduces runout by trueing the disc to the vehicle's hub and bearing. Castings on un-machined disc surfaces show what the minimum acceptable thickness is and it is essential not to machine the disc below that value. Before fixing anything in place, look for any signs of chips, rust or dirt on the disc and the hub adapters. When working with a brake lathe, don't make adjustments and machine both halves of the disc to avoid any warping. Since the TIR and thickness values must remain within limits, operators must exercise extreme caution when using disc turning equipment during refacing work.