How to Service and Repair a Tie Rod End on Chrysler Voyager?

Begin by turning loose the jam nut between the inner and outer tie rod. Unattach the nut joining the outer tie rod end and the steering knuckle by holding the stud of the tie rod end with a 11/32 socket and using a wrench on the nut. Use the Remover, Special Tool C-3894-A to remove the tie rod link from the steering knuckle arm and then un-thread the outer tie rod end from the inner tie rod. The cloudy plastic piece should be in place on the inner tie rod before you put on the outer tie rod. Untighten the inner tie rod and insert the outer tie rod. Push the tie rod end into the steering knuckle and start the nut on the end of the rod toward the steering knuckle. While keeping the stud stationary, tighten the attaching nut, then attach a crowfoot and 11/32 socket to tighten the nut to 75 Nm (55 ft. lbs.). After that, set the tie rod jam nut to 75 Nm (55 ft. lbs.) and check that the steering gear boot is not twisted while you tighten it. Adjust the front toe setting at the same time.

OEM Chrysler Voyager Tie Rod End

Steering Rod End

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Tie Rod Ends found

View related parts
Chrysler Voyager Outer Tie Rod Part Number: 4797706
$32.35 MSRP: $45.25
You Save: $12.90 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tie Rod; Drag Link Repair Kit; Outer Tie Rod End; Tie Rod End; End Tie Rod
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2000 Chrysler Voyager | Base, SE | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS
View related parts
Chrysler Voyager Outer Tie Rod Part Number: 5066373AB
Product Specifications
- Other Name: Tie Rod - Outer; Steering Tie Rod End, Outer; Drag Link Repair Kit; Outer Tie Rod End; Tie Rod End
- Position: Outer
- Replaces: 5066373AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2003 Chrysler Voyager | Base, Ec, LX | 2.4L L4, 3.3L V6, 4 Cyl 2.4 L GAS, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS

Chrysler Voyager Tie Rod End

Choose OEM Tie Rod End that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each Tie Rod End follows strict manufacturing steps to lock in quality and fit. If your Chrysler Voyager matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Voyager parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Chrysler Voyager Tie Rod End is an essential part of the Chrysler Voyager Steering system that helps in the smooth and safe driving of the vehicle. This bit: it fix the steering rack to steering knuckles and enables a precise control and stability during the vehicle operation. The Tie Rod End assembly is made up of both the inner and outer tie rod end that in teamwork ensures that the Chrysler Voyager gives smooth responses to the steering wheel as it is very important for the efficiency of the car. Due to the possibility to install the Tie Rod End on different Voyager models, it has a rather good reputation of a durable and effective part, which is widely used by Chrysler fans. The duties of the Tie Rod End also exceed its apparent purpose: It helps improve vehicle safety by helping to keep the wheels properly aligned and minimizing the wear on other parts of the steering mechanism. Sleek it further, the Chrysler Voyager Tie Rod End can be relied on to last long because it is has been built to take the daily beating on the road. It has enhanced structural integrity as well as has incorporated more features of engineering differentiation from the other automobiles in the market, which provides assurance to the most specific buyers market interested in vehicles that will not break down or require constant repairs. Up to the present, the Chrysler Voyager remains in development, and the Tie Rod End consistently contributes to the minivan's tradition of quality and customer satisfaction. To sum up, the Chrysler Voyager Tie Rod End is essential for the good condition of the car, its safety, and comfortable operation.

Chrysler Voyager Tie Rod End Parts and Q&A

Outer Tie Rod
5066373AB
Q: How to Service and Repair a Tie Rod End on Chrysler Voyager?
A:
Begin by turning loose the jam nut between the inner and outer tie rod. Unattach the nut joining the outer tie rod end and the Steering Knuckle by holding the stud of the tie rod end with a 11/32 socket and using a wrench on the nut. Use the Remover, Special Tool C-3894-A to remove the tie rod link from the steering knuckle arm and then un-thread the outer tie rod end from the inner tie rod. The cloudy plastic piece should be in place on the inner tie rod before you put on the outer tie rod. Untighten the inner tie rod and insert the outer tie rod. Push the tie rod end into the steering knuckle and start the nut on the end of the rod toward the steering knuckle. While keeping the stud stationary, tighten the attaching nut, then attach a crowfoot and 11/32 socket to tighten the nut to 75 Nm (55 ft. lbs.). After that, set the tie rod jam nut to 75 Nm (55 ft. lbs.) and check that the steering gear boot is not twisted while you tighten it. Adjust the front toe setting at the same time.