JeepParts
My Garage
My Account
Cart
OEM Dodge Avenger Brake Rotor
Disc Rotor- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
6 Brake Rotors found
Dodge Avenger Rotor, Front Part Number: 5105514AA
$86.47 MSRP: $130.00You Save: $43.53 (34%)Ships in 1-2 Business Days
Dodge Avenger Rotor, Rear Part Number: 5105515AA
$88.92 MSRP: $133.00You Save: $44.08 (34%)Ships in 1-2 Business DaysDodge Avenger Rotor, Rear Part Number: 4743999AA
$87.08 MSRP: $131.00You Save: $43.92 (34%)Ships in 1-2 Business Days
Dodge Avenger ABS Ring, Rear Passenger Side Part Number: MR249451
Dodge Avenger Rotor, Rear Part Number: MB928716
Dodge Avenger Rotor, Front Part Number: MR389724
Dodge Avenger Brake Rotor
Choose OEM Brake Rotor that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Brake Rotor follows strict manufacturing steps to lock in quality and fit. If your Dodge Avenger matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Avenger parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.
Dodge Avenger Brake Rotor Parts and Q&A
- Q:How to Remove and Replace the Rear Brake Rotor on Dodge Avenger?A:Before removing the rear brake rotor, raise and support the vehicle first. Following this, take out the wheel mounting nuts and replace the tire and wheel assembly forward. If the pads are too tight against the rotor, it may be important to back out the caliper piston a little to give enough room for caliper removal from the knuckle. To do this without damaging the piston, place your hands on the inboard side of the caliper, grip it firmly and slowly push it outwards together with the guide pins as you avoid contact with the piston. After that, remove the disc Brake Caliper lower guide pin bolt. Do not let the caliper move up so far that you strain or break the flexible hose. To make removing the rotor possible, flip the caliper so the upper guide pin bolt acts as a hinge and hold the caliper up with wire or a bungee cord. Afterward, move the brake rotor away from the hub and bearing and take it out.
- Q:How to Remove and Replace a Front Brake Rotor on Dodge Avenger?A:Raise and support the vehicle before you take out and put in a new front brake rotor. Removal of the wheel mounting nuts comes before taking out the tire and wheel as a set. At times, you'll have to pull the inboard side of the caliper slightly to give the pads and rotor enough room to remove the caliper from the knuckle; avoid pressing hard on the piston to keep it safe. After that, take out the two bolts that connect the disc Brake Caliper and adapter bracket to the Steering Knuckle. Disconnect the disc brake caliper and adapter bracket from the knuckle and rotor together and then hang the assembly out of your way so the brake hose doesn't get stretched too much. After that, take the brake rotor off its place on the hub and bearing.
Related Dodge Avenger Parts
Dodge Avenger ABS Sensor
Dodge Avenger ABS Control Module
Dodge Avenger ABS Pump And Motor Assembly
Dodge Avenger ABS Reluctor Ring
Dodge Avenger Backing Plate
Dodge Avenger Brake Caliper Bolt
Dodge Avenger Brake Controller
Dodge Avenger Brake Line
Dodge Avenger Brake Shoe Set
Dodge Avenger Hydraulic Hose
Dodge Avenger Wheel Bearing Dust Cap
Dodge Avenger Wheel Cylinder