How to Install a Power Steering Hose on Dodge Avenger?

The return hose should be set into the engine compartment first and held in place with the routing clamp screw. First, raise and support the vehicle and after that, attach the routing hose to the frame rail by tightening the routing clamp screw to 8 Nm (71 in. lbs.). After that, attach the return hose with its screws to the frame rail and back them in until the wrench reads 8 Nm (71 in. lbs.). Secure the return hose to the cooler line and attach the hose clamps. Secure the hose at the return tube using a clamp and tighten the screw-clamp to 2.5 Nm (20 in. lbs.) if you have a screw-clamp. Reattach the lower fascia valance and, when equipped, fix the belly pan in place below the engine. Run down the vehicle and fit the coolant recovery bottle and next place the power steering fluid reservoir. Power steering should be filled and bled, then make sure to inspect the system for leaks.

How to Service and Repair a Power Steering Hose on Dodge Avenger?

After buying the hose and clamps, slide the clamps onto both sides of the power steering supply hose to ensure they're far enough to pass over the reservoir and pump reservoirs when you install them. After that, attach the supply hose pump end to the supply fitting, extend the clamp, slide it over the pump supply and hose and tighten the clamp after it passes the bead in the supply fitting. Afterward, lead the supply hose end which is on the fluid reservoir, into the reservoir supply fitting and tighten the clamp around the hose and fitting. Once installed, finish your power steering system by using a filler and checking for possible leaks.

OEM Dodge Avenger Power Steering Hose

Power Steering Pressure Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

14 Power Steering Hoses found

View related parts
Dodge Avenger Power Steering Return Hose Part Number: 68143978AB
$91.43 MSRP: $140.00
You Save: $48.57 (35%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose - Power Steering Return; Power Steering Hose; Return Hose; Hose Power Steering Return Includes Both Brackets; Hose Power Steering Return
- Replaces: 5085546AF, 5085546AG
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2014 Dodge Avenger | Express, Heat, Lux, Mainstreet, R/T, SE, SXT, SXT Plus | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX
View related parts
Dodge Avenger Power Steering Pressure Hose Part Number: 68080398AH
$103.89 MSRP: $166.00
You Save: $62.11 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose - Power Steering Pressure; Power Steering Hose; Pressure Hose
- Replaces: 68080398AE, 68080398AF, 68080398AG, 68080398AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2014 Dodge Avenger | Express, Lux, Mainstreet, SE, SXT | 2.4L L4, 4 Cyl 2.4 L GAS
View related parts
Dodge Avenger Power Steering Pressure Hose Part Number: 5154721AE
$117.92 MSRP: $175.00
You Save: $57.08 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Line - Power Steering Pressure; Power Steering Hose; Pressure Hose
- Replaces: 5272817AC, 5272817AG, 5154721AA, 5154721AC, 5272817AE, 5272817AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2014 Dodge Avenger | Express, Lux, Mainstreet, R/T, SE, SXT | 2.4L L4, 4 Cyl 2.4 L GAS
View related parts
Dodge Avenger Power Steering Pressure Hose Part Number: 68081023AF
$92.04 MSRP: $138.00
You Save: $45.96 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose - Power Steering Pressure; Power Steering Hose; Pressure Hose
- Replaces: 68081023AE, 68081023AC, 68081023AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2014 Dodge Avenger | Express, Heat, Lux, Mainstreet, R/T, SE, SXT, SXT Plus | 3.6L V6, 6 Cyl 3.6 L FLEX
View related parts
Dodge Avenger Power Steering Pressure Hose Part Number: 5085449AF
$130.82 MSRP: $180.00
You Save: $49.18 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose - Power Steering Pressure; Power Steering Hose; Pressure Hose
- Replaces: 5085449AB, 5085449AC, 5085449AE, 5085449AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2010 Dodge Avenger | R/T | 3.5L V6, 6 Cyl 3.5 L GAS
View related parts
Dodge Avenger Upper Pressure Tube Part Number: MB911566
$5.35 MSRP: $6.78
You Save: $1.43 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Line Power Steering Pressure; Power Steering Hose; Hose Power Steering Pressure; Tube, Pressure
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1995-2000 Dodge Avenger | Base, ES | 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS
View related parts
Dodge Avenger Lower Return Tube Part Number: MB911565
Product Specifications
- Other Name: Line Power Steering Return; Hose Power Steering Return; Tube, Return Gear To Pump
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1995-1997 Dodge Avenger | Base, ES | 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS
View related parts
Dodge Avenger Power Steering Return Hose Part Number: MB911562
Product Specifications
- Other Name: Line Power Steering Return; Reservoir Hose; Lower Return Hose; Hose Power Steering Return; Hose, Return To Cooler
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1995-2000 Dodge Avenger | Base, ES | 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS
View related parts
Dodge Avenger Power Steering Return Hose Part Number: MB911561
Product Specifications
- Other Name: Line Power Steering Return; Power Steering Hose; Return Hose; Center Return Hose; Upper Return Hose; Hose, Return To Cooler To Gear; Hose Power Steering Return
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1995-2000 Dodge Avenger | Base, ES | 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS
View related parts
Dodge Avenger Power Steering Pressure Hose Part Number: MB911557
Product Specifications
- Other Name: Line Power; Power Steering Hose; Pressure Hose; Upper Pressure Hose; Hose Power Steering Pressure; Hose, Pressure To Pump
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1995-2000 Dodge Avenger | Base, ES | 6 Cyl 2.5 L GAS
View related parts
Dodge Avenger Lower Return Tube Part Number: MR369959
Product Specifications
- Other Name: Line - Power Steering Return; Power Steering Hose; Hose Power Steering Return
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1998-2000 Dodge Avenger | Base, ES | 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS
View related parts
Dodge Avenger Pressure Hose Part Number: 5085325AH
Product Specifications
- Other Name: Hose - Power Steering Pressure; Power Steering Hose
- Replaces: 5085325AG
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008 Dodge Avenger | SE, SXT | 4 Cyl 2.4 L GAS
View related parts
Dodge Avenger Pressure Hose Part Number: 5085326AF
Product Specifications
- Other Name: Hose - Power Steering Pressure; Power Steering Hose
- Replaces: 5085326AD, 5085326AE, 5085326AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2009 Dodge Avenger | SE, SXT | 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS
View related parts
Dodge Avenger Power Steering Pressure Hose Part Number: 5272818AF
Product Specifications
- Other Name: Line - Power Steering Pressure; Power Steering Hose; Pressure Hose; Reservoir Hose
- Replaces: 5272818AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2010 Dodge Avenger | R/T, SE, SXT | 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS

Dodge Avenger Power Steering Hose

Choose OEM Power Steering Hose that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Power Steering Hose follows strict manufacturing steps to lock in quality and fit. If your Dodge Avenger matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Avenger parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Dodge Avenger Power Steering Hose is an important part that greatly contributes to the improved dependability as well as efficiency of the Dodge Avenger, which is a mid-size sedan that is multipurpose in its application and design. This Power Steering Hose joins the power steering pump to the steering gear where it enhances the circulation of pressurized steering fluid vital in ease of steering. This Dodge Avenger Power Steering Hose is specifically produced for regular use to enhance the steerability and easy maneuverability of the vehicles. Versatility that ranges from the standard Dodge Avenger all-illusion 2.0L four-cylinder and 2.5L V6 models make this Power Steering Hose a critical functional element within the line of these automobiles. It is built with a possible rubber and pre-bent metal tubing that protect it against heat from the engine and road debris and reliable high-pressure fittings on both ends that would not allow leakage. The Dodge Avenger Power Steering Hose has functional importance that goes beyond its role of boosting the performance; the Steering System enables the power steering to run efficiently to support safety. Piping or any tube that is used in the automotive field has specific features implemented in its design to ensure it does not allow fluid leakages while providing the right channels for the steering, and thus this hose offers the market a proven efficiency in operations. In total, the Dodge Avenger Power Steering Hose is a proof of the Dodge brand's excellence and responsiveness and therefore should be regarded as a must-have addition to the Dodge Avenger car.

Dodge Avenger Power Steering Hose Parts and Q&A

Power Steering Pressure Hose
5085449AF
Q: How to Install a Power Steering Hose on Dodge Avenger?
A:
The return hose should be set into the engine compartment first and held in place with the routing clamp screw. First, raise and support the vehicle and after that, attach the routing hose to the frame rail by tightening the routing clamp screw to 8 Nm (71 in. lbs.). After that, attach the return hose with its screws to the frame rail and back them in until the wrench reads 8 Nm (71 in. lbs.). Secure the return hose to the cooler line and attach the hose clamps. Secure the hose at the return tube using a clamp and tighten the screw-clamp to 2.5 Nm (20 in. lbs.) if you have a screw-clamp. Reattach the lower fascia valance and, when equipped, fix the belly pan in place below the engine. Run down the vehicle and fit the coolant recovery bottle and next place the power steering fluid reservoir. Power steering should be filled and bled, then make sure to inspect the system for leaks.
Power Steering Return Hose
68143978AB
Q: How to Service and Repair a Power Steering Hose on Dodge Avenger?
A:
After buying the hose and clamps, slide the clamps onto both sides of the power steering supply hose to ensure they're far enough to pass over the reservoir and pump reservoirs when you install them. After that, attach the supply hose pump end to the supply fitting, extend the clamp, slide it over the pump supply and hose and tighten the clamp after it passes the bead in the supply fitting. Afterward, lead the supply hose end which is on the fluid reservoir, into the reservoir supply fitting and tighten the clamp around the hose and fitting. Once installed, finish your power steering system by using a filler and checking for possible leaks.