How to Service a Power Steering Pump on a 2.0L/2.4L Engine on Dodge Avenger?

Before touching the power steering pump, remove as much power steering fluid from the reservoir as you can. After that, take out the engine cover and the bolt on the bracket for the pressure hose at the top mount. Free the pressure hose connector at the pump pressure port and release the clamp holding the supply hose to the pump, straight after which the supply hose may be detached. After that, remove the drive belt from the wheel. Take a wrench and loosen the three pump mounting bolts through the access holes in the pulley to remove the entire power steering pump form the engine.

How to Install a Power Steering Pump on a 2.0L/2.4L Engine on Dodge Avenger?

When installing the power steering pump on a 2.0L/2.4L engine, first clean the pressure hose and the port on the pump with a dry towel, change any worn O-rings with new ones and apply a bit of clean power steering fluid to the rings. Attach the pump where it will be located and screw in the bolts through the pulley holes until the torque reaches 26 Nm (19 ft.lbs.). Now, fit the drive belt, after which you should install the supply hose at the pump while securing it with a hose clamp. Put the pressure hose onto the pump pressure port and secure it with a tube nut tightened to 32 Nm (24 ft. lbs.) and then attach the pressure hose routing bracket bolt to the engine mount and tighten it to 24 Nm (18 ft. lbs.). Give the power steering system fresh fluid, look for any leaks and lastly, attach the engine appearance cover.

OEM Dodge Avenger Power Steering Pump

Power Steering Pump Unit

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Power Steering Pumps found

View related parts
Dodge Avenger Power Steering Pump Part Number: 5154371AB
$202.72 MSRP: $239.00
You Save: $36.28 (16%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pump - Power Steering; Pump Power Steering
- Replaced by: R5154371AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2013-2014 Dodge Avenger | SE, SXT | 2.4L L4, 4 Cyl 2.4 L GAS
View related parts
Dodge Avenger Power Steering Pump Part Number: 5151016AE
$250.20 MSRP: $379.00
You Save: $128.80 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pump - Power Steering; Pump Power Steering
- Replaces: 5151016AD, 5151016AB, 5151016AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2014 Dodge Avenger | Express, Lux, Mainstreet, R/T, SE, SXT | 2.4L L4, 4 Cyl 2.4 L GAS
View related parts
Dodge Avenger Power Steering Pump Part Number: 68081999AC
Product Specifications
- Other Name: Pump - Power Steering; Pump Power Steering
- Replaces: RL081999AA, 68081999AB, 68081999AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2014 Dodge Avenger | Express, Heat, Lux, Mainstreet, R/T, SE, SXT, SXT Plus | 3.6L V6, 6 Cyl 3.6 L FLEX
View related parts
Dodge Avenger Power Steering Pump Part Number: R5154371AB
$202.72 MSRP: $239.00
You Save: $36.28 (16%)
Product Specifications
- Other Name: Pump - Power Steering; Pump Power Steering
- Replaces: 5154371AB, 5154371AA, RL154371AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2014 Dodge Avenger | Express, Lux, Mainstreet, SE, SXT | 2.4L L4, 4 Cyl 2.4 L GAS
View related parts
Dodge Avenger Power Steering Pump Part Number: MB910655
Product Specifications
- Other Name: Pump Power Steering; Oil Pump Assembly, Power Steering
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1995-1999 Dodge Avenger | Base, ES | 4 Cyl 2.0 L GAS
View related parts
Dodge Avenger Power Steering Pump Part Number: 4766044AA
Product Specifications
- Other Name: Pump - Power Steering; Pump Power Steering; Pump
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2010 Dodge Avenger | R/T | 6 Cyl 3.5 L GAS
View related parts
Dodge Avenger Power Steering Pump Part Number: 4766041AB
Product Specifications
- Other Name: Pump - Power Steering; Pump Power Steering
- Replaces: 4766041AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2010 Dodge Avenger | R/T, SE, SXT | 2.7L V6, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS

Dodge Avenger Power Steering Pump

Choose OEM Power Steering Pump that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Power Steering Pump follows strict manufacturing steps to lock in quality and fit. If your Dodge Avenger matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Avenger parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Power Steering Pump in Dodge Avenger is instrumental in changing the engine power to hydraulic energy thus making steering easy to do. This pump functions to create fluid pressure which helps the driver control the vehicle especially when in low speed or at stand still. It is usually belt-driven by the engine crankshaft while it has a pump pulley with a fluid container which can be casting or separate. Koscielski notes that power steering system for Dodge Avenger models may incorporate another style of pump, and that while retaining a hydraulic connection between the wheels and steering wheel such that manual operation will still remain possible even if the power system is gone. Some of the problems associated with the Dodge Avenger Power Steering Pump include a leakages problem, noises problem and an inconsistent power assist problem which if not inspected or replaced as early as possible may lead to performance problem.

Dodge Avenger Power Steering Pump Parts and Q&A

Power Steering Pump
5151016AE
Q: How to Service a Power Steering Pump on a 2.0L/2.4L Engine on Dodge Avenger?
A:
Before touching the power steering pump, remove as much power steering fluid from the reservoir as you can. After that, take out the engine cover and the bolt on the bracket for the pressure hose at the top mount. Free the pressure hose connector at the pump pressure port and release the clamp holding the supply hose to the pump, straight after which the supply hose may be detached. After that, remove the Drive Belt from the wheel. Take a wrench and loosen the three pump mounting bolts through the access holes in the pulley to remove the entire power steering pump form the engine.
Power Steering Pump
4766041AB
Q: How to Install a Power Steering Pump on a 2.0L/2.4L Engine on Dodge Avenger?
A:
When installing the power steering pump on a 2.0L/2.4L engine, first clean the pressure hose and the port on the pump with a dry towel, change any worn O-rings with new ones and apply a bit of clean power steering fluid to the rings. Attach the pump where it will be located and screw in the bolts through the pulley holes until the torque reaches 26 Nm (19 ft.lbs.). Now, fit the Drive Belt, after which you should install the supply hose at the pump while securing it with a hose clamp. Put the pressure hose onto the pump pressure port and secure it with a tube nut tightened to 32 Nm (24 ft. lbs.) and then attach the pressure hose routing bracket bolt to the Engine Mount and tighten it to 24 Nm (18 ft. lbs.). Give the power steering system fresh fluid, look for any leaks and lastly, attach the engine appearance cover.