How to Service and Repair a Turn Signal Switch on Dodge Dakota?

To service and repair the turn signal switch, first disconnect and isolate the battery negative cable. If applicable, unscrew the lever from the tilt steering column adjuster mechanism located on the left side of the column just below the multi-function switch stalk by turning it counterclockwise. Remove both the upper and lower shrouds from the steering column, followed by the lower fixed column shroud. Move the upper fixed column shroud to access the back of the multi-function switch, then remove the tamper proof mounting screws using a Snap On tamper proof Torx bit TTXR20B2 or equivalent. Gently pull the multi-function switch away from the steering column to access and remove the screw securing the instrument panel wire harness connector to the multi-function switch connector receptacle, then disconnect the instrument panel wire harness connector. Remove the multi-function switch from the steering column. For installation, position the multi-function switch onto the steering column and reconnect the instrument panel wire harness connector to the multi-function switch connector receptacle. Install and tighten the screw securing the instrument panel wire harness connector to the multi-function switch connector receptacle to 2 Nm (17 in. lbs.), then install and tighten the two screws securing the multi-function switch to the steering column to the same torque specification. Install the lower fixed column shroud, followed by both the upper and lower shrouds onto the steering column. If applicable, install the tilt steering column lever onto the left side of the steering column by screwing it into place, and finally reconnect the battery negative cable.

OEM Dodge Dakota Turn Signal Switch

Turn Signal Indicator Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Turn Signal Switches found

View related parts
Dodge Dakota Multifunction Switch Part Number: 56045078AD
$230.11 MSRP: $291.71
You Save: $61.60 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch - Multifunction; Turn Signal & Combination Lever; Windshield Washer Switch.; Wiper Switch; Switch Multifunction
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2004 Dodge Dakota | Base, R/T, SLT, SLT Plus, SXT, Sport, Sport Plus | 4 Cyl 2.5 L GAS, 6 Cyl 3.7 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.9 L GAS
View related parts
Dodge Dakota Turn Signal Switch Part Number: 4373412
Product Specifications
- Other Name: Switch; Windshield Washer Switch; Hazard Flasher Switch; Multi Purpose Switch; Air Bag Clockspring; Combination Switch; Signal Switch; Turn Signal & Hazard Switch; W/O Tilt; Turn/Wiper Switch; Clockspring
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1987-1990 Dodge Dakota | Base, LE, S, SE, Shelby, Sport | 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 5.2 L GAS
View related parts
Dodge Dakota Turn Signal Switch Part Number: 4373048
Product Specifications
- Other Name: Switch - Turn Signal & Hazard Warning; Hazard Flasher Switch; Multi Purpose Switch; Signal Switch; Turn Signal & Hazard Switch, W/O Cornering Lamp, W/O Tilt; W/Tilt; Switches
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1987 Dodge Dakota | Base, LE, SE | 4 Cyl 2.2 L GAS, 6 Cyl 3.9 L GAS
View related parts
Dodge Dakota Ignition Switch Part Number: 4728424
Product Specifications
- Other Name: Switch - Multifunction; Turn Signal & Combination Lever; Steering Column Housing; Windshield Washer Switch.; Turn Signal Switch; Multifunction, Wiper, Headlamp Dimmer, Hazard, Signal & Tilt options.
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1991-2000 Dodge Dakota | Base, LE, R/T, S, SE, SLT, Sport, WS | 4 Cyl 2.5 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.2 L CNG, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
Dodge Dakota Turn Signal Switch Part Number: 56049823AB
Product Specifications
- Other Name: Switch - Multifunction; Turn Signal & Combination Lever; Steering Column Switch; Air Bag Clockspring.; Multifunction Switch; Switch Housing; Ignition Housing; Clockspring; Switch Multifunction
- Replaces: 56045515AA, 56049823AA, 56045165AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2010 Dodge Dakota | Big Horn, Laramie, Lone Star, SLT, Sport, ST, SXT, TRX, TRX4 | 2.5L L4, 3.7L V6, 3.9L V6, 4.7L V8, 5.9L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
View related parts
Dodge Dakota Turn Signal Switch Part Number: 4778760
Product Specifications
- Other Name: Switch - Multifunction; Steering Column Switch Housing; Multi Purpose Switch; Combination Switch; Multi-Function Turn Signal & Wiper; Headlamp Dimmer; Signal & Hazard Switch.
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1991-1997 Dodge Dakota | Base, LE, S, SE, SLT, Sport, WS | 4 Cyl 2.5 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 5.2 L CNG, 8 Cyl 5.2 L GAS

Dodge Dakota Turn Signal Switch

Choose OEM Turn Signal Switch that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Turn Signal Switch follows strict manufacturing steps to lock in quality and fit. If your Dodge Dakota matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Dakota parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Dodge Dakota Turn Signal Switch is the lever on the steering column that lets the driver signal for a turn. Dodge turn signals are a feature of a car that assists in notifying other drivers about the car's movement or presence on the road ahead of time. The Turn Signal Switch is an electrical switch that activates the automobile turn signals. The Turn Signal Switch is located on the same assembly and can also have extra dials for switching on the headlamp, fog lamps, windshield wipers, and cruise control. This enables a Dakota operator to control several functions without taking a hand off the wheel. Every time the Turn Signal Switch generates a signal, other drivers expect some kind of movement. So, if this unit becomes worn or faulty, it can impact the Dodge pickup and other road users. Choosing a replacement requires matching the switch to the exact specification of the Dakota model to ensure that the connectors, mounting points, and multifunction controls fit. A Turn Signal Switch that works properly keeps the Dodge Dakota lighting system clear and predictable.

Dodge Dakota Turn Signal Switch Parts and Q&A

Ignition Switch
4728424
Q:
How to Service and Repair a Turn Signal Switch on Dodge Dakota?
A:
To service and repair the turn signal switch, first disconnect and isolate the battery negative cable. If applicable, unscrew the lever from the tilt steering column adjuster mechanism located on the left side of the column just below the multi-function switch stalk by turning it counterclockwise. Remove both the upper and lower shrouds from the steering column, followed by the lower fixed column shroud. Move the upper fixed column shroud to access the back of the multi-function switch, then remove the tamper proof mounting screws using a Snap On tamper proof Torx bit TTXR20B2 or equivalent. Gently pull the multi-function switch away from the steering column to access and remove the screw securing the instrument panel wire harness connector to the multi-function switch connector receptacle, then disconnect the instrument panel wire harness connector. Remove the multi-function switch from the steering column. For installation, position the multi-function switch onto the steering column and reconnect the instrument panel wire harness connector to the multi-function switch connector receptacle. Install and tighten the screw securing the instrument panel wire harness connector to the multi-function switch connector receptacle to 2 Nm (17 in. lbs.), then install and tighten the two screws securing the multi-function switch to the steering column to the same torque specification. Install the lower fixed column shroud, followed by both the upper and lower shrouds onto the steering column. If applicable, install the tilt steering column lever onto the left side of the steering column by screwing it into place, and finally reconnect the battery negative cable.