How to Service and Repair a Harmonic Balancer on Dodge Durango?

Before servicing or repairing the harmonic balancer and crankshaft pulley, first remove the negative battery cable. Loosen the fan shroud retainer bolts and set the shroud aside, after that unplug the cooling fan and the serpentine belt. Next, take off the vibration damper pulley, after that remove the washer and the vibration damper bolt from the crankshaft. Install the bar and screw, along with two bolts and two washers using the Puller Tool Set C-3688, push the vibration damper tool into the damper, then pull the damper off the crankshaft. To install, put the vibration damper on the crankshaft, then press it tightly onto the crankshaft using the tool from Puller Tool Set C-3688. Join the crankshaft bolt with its washer, setting the tension to 183 Nm (135 ft. lbs.) and then tighten the crankshaft pulley bolts to 23 Nm (200 in. lbs.). Replace the serpentine belt and the cooling system fan, then tighten their bolts to 23 Nm (17 ft. lbs.) torque. Then, secure the fan shroud into place, tighten the bolts to 11 Nm (95 in. lbs.), install them and reconnect the negative battery cable last.

How to Install the Harmonic Balancer on the Crankshaft on Dodge Durango?

Before fitting the harmonic balancer to the crankshaft, first clean both the bore of the balancer and the nose of the crankshaft to avoid damage. Misalign the harmonic balancer with the key on the crankshaft and press it down so that it is touching the crankshaft. Attach boring ring 8512-A by turning nut onto threaded rod, then placing roller bearing onto the rod so the hardened surface faces toward nut and next sliding hardened washer onto the rod. Use Mopar(R) Nickel Anti-Seze or an equivalent product to cover the threads of the threaded rod. Install the Balancer Installer 8512-A, pushing down on the balancer onto the crankshaft and torque the harmonic balancer bolt to 175 Nm (130 ft. lbs.). After that, put in the radiator fan and the accessory drive belt. The last step is to attach the negative cable to the battery.

OEM Dodge Durango Harmonic Balancer

Engine Harmonic Balancer

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

12 Harmonic Balancers found

View related parts
Dodge Durango Crankshaft Pulley Part Number: 5184293AH
$271.83 MSRP: $410.00
You Save: $138.17 (34%)
ADD TO CART
Product Specifications
- Other Name: Damper - Crankshaft; Engine Crankshaft Pulley; Engine Harmonic Balancer; Harmonic Balancer Puller; Vibration Damper; Crankshaft Damper; Damper Crankshaft; Harmonic Balancer
- Replaces: 5184293AC, 5184293AG
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2025 Dodge Durango | Citadel, Crew, Express, GT, GT Plus, GT Premium, Heat, Limited, Pursuit, Rallye, Special Service, SXT, SXT Plus | 3.6L V6, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Dodge Durango Vibration Damper Part Number: 53010831AD
$377.24 MSRP: $523.00
You Save: $145.76 (28%)
ADD TO CART
Product Specifications
- Other Name: Damper - Crankshaft; Harmonic Balancer Puller; Harmonic Balancer; Crankshaft Damper; Damper Crankshaft
- Replaces: 5038731AE, 5038731AG, 53010831AB, 53010831AC, 5038731AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2023-2025, 2021 Dodge Durango | SRT Hellcat, SRT Hellcat Plus, SRT Hellcat Premium | 8 Cyl 6.2 L GAS
View related parts
Dodge Durango Vibration Damper Part Number: 5038473AA
$323.77 MSRP: $494.00
You Save: $170.23 (35%)
ADD TO CART
Product Specifications
- Other Name: Damper - Crankshaft; Harmonic Balancer Puller; Harmonic Balancer; Crankshaft Damper; Damper Crankshaft
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2018-2024 Dodge Durango | SRT, SRT 392, SRT 392 Plus, SRT 392 Premium | 8 Cyl 6.4 L GAS
View related parts
Dodge Durango Vibration Damper Part Number: 53022083AA
$398.91 MSRP: $607.00
You Save: $208.09 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Damper - Crankshaft; Harmonic Balancer Puller; Harmonic Balancer; Crankshaft Damper; Damper Crankshaft; Damper Vibration
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009 Dodge Durango | Limited, Limited Hybrid, SE, SLT | 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
View related parts
Dodge Durango Vibration Damper Part Number: 53022162AA
$630.21 MSRP: $739.00
You Save: $108.79 (15%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Damper - Crankshaft; Harmonic Balancer Puller; Harmonic Balancer; Crankshaft Damper; Pulley; Damper Crankshaft
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2009 Dodge Durango | Adventurer, Limited, SE, SLT, SXT | 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
View related parts
Dodge Durango Vibration Damper Part Number: 53022413AA
$250.39 MSRP: $371.00
You Save: $120.61 (33%)
Product Specifications
- Other Name: Damper - Crankshaft; Engine Harmonic Balancer; Harmonic Balancer Puller; Crankshaft Damper; Damper Crankshaft; Harmonic Balancer
- Replaces: 53022334AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2025 Dodge Durango | Citadel, Crew, GT, Limited, Pursuit, R/T, R/T Hemi Orange, R/T Plus, R/T Premium, SXT, Special Service | 8 Cyl 5.7 L GAS
View related parts
Dodge Durango Vibration Damper Part Number: 53020229
Product Specifications
- Other Name: Damper - Crankshaft; Engine Harmonic Balancer; Pulley; Damper Crankshaft; Damper, Vibration; Harmonic Balancer
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1998-2000 Dodge Durango | Base, SLT, SLT Plus, Sport | 6 Cyl 3.9 L GAS, 8 Cyl 5.2 L GAS
View related parts
Dodge Durango Vibration Damper Part Number: 53021303AA
Product Specifications
- Other Name: Crankshaft; Harmonic Balancer Puller; Harmonic Balancer; Crankshaft Damper; Damper Crankshaft
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008, 2004 Dodge Durango | Adventurer, Limited, SLT | 8 Cyl 5.7 L GAS
View related parts
Dodge Durango Vibration Damper Part Number: 53021284AA
Product Specifications
- Other Name: Damper - Crankshaft; Engine Harmonic Balancer; Pulley; Damper Crankshaft; Harmonic Balancer
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1998-2003 Dodge Durango | Base, R/T, SLT, SLT Plus, SXT, Sport | 8 Cyl 5.9 L GAS
View related parts
Dodge Durango Vibration Damper Part Number: 53020689AB
Product Specifications
- Other Name: Damper - Crankshaft; Harmonic Balancer Puller; Harmonic Balancer; Crankshaft Damper; Pulley; Damper Crankshaft
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2000-2009 Dodge Durango | Adventurer, Base, Limited, SE, SLT, SLT Plus, ST, SXT, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
View related parts
Dodge Durango Crankshaft Pulley Part Number: 53010222
Product Specifications
- Other Name: Pulley - Crankshaft; Engine Crankshaft; Serpentine Belt Kit; Harmonic Balancer; Idler Pulley; Drive Pulley; Serpentine Idler Pulley; Pulley; Pulley Crankshaft; Pulley, Drive
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1998-1999 Dodge Durango | Base, SLT, SLT Plus | 6 Cyl 3.9 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
Dodge Durango Vibration Damper Part Number: 53021303AD
Product Specifications
- Other Name: Damper - Crankshaft; Harmonic Balancer Puller; Harmonic Balancer; Crankshaft Damper; Damper Crankshaft
- Replaces: 53021303BA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2007 Dodge Durango | Adventurer, Limited, SLT, ST, SXT | 5.7L V8, 8 Cyl 5.7 L GAS

Dodge Durango Harmonic Balancer

Choose OEM Harmonic Balancer that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Harmonic Balancer follows strict manufacturing steps to lock in quality and fit. If your Dodge Durango matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Durango parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Harmonic Balancer in Dodge Durango helps to balance the engine and absorb most of the vibrations which results from the combustion process. This part is called vibration damper, it includes a metal centre part connected to the crankshaft, an outer steel ring, an inner steel ring referred to as inertia ring and a rubber ring that yields when twisted in a direction. They say that after some time the effect of heat and the fluids may damage the rubber which may cause crankshaft if the balancer gives way. Cvip for Dodge Durango models have employed different varieties of Harmonic Balancers, be it the standard originals which are additionally provided for the models or the performance versions. Whereas standard balancers are made to fit factory engine capabilities, performance harmonic balancers are meant for modified engines to compensate for higher vibrations at higher RMPs. Among these performance options the traditional, viscous fluid, and multi-piece designs of the LCVs have been proven for their safety and adequacy in extreme conditions.

Dodge Durango Harmonic Balancer Parts and Q&A

Vibration Damper
53021284AA
Q:
How to Service and Repair a Harmonic Balancer on Dodge Durango?
A:
Before servicing or repairing the harmonic balancer and Crankshaft pulley, first remove the negative battery cable. Loosen the fan shroud retainer bolts and set the shroud aside, after that unplug the cooling fan and the Serpentine Belt. Next, take off the vibration damper pulley, after that remove the washer and the vibration damper bolt from the crankshaft. Install the bar and screw, along with two bolts and two washers using the Puller Tool Set C-3688, push the vibration damper tool into the damper, then pull the damper off the crankshaft. To install, put the vibration damper on the crankshaft, then press it tightly onto the crankshaft using the tool from Puller Tool Set C-3688. Join the crankshaft bolt with its washer, setting the tension to 183 Nm (135 ft. lbs.) and then tighten the crankshaft pulley bolts to 23 Nm (200 in. lbs.). Replace the serpentine belt and the cooling system fan, then tighten their bolts to 23 Nm (17 ft. lbs.) torque. Then, secure the fan shroud into place, tighten the bolts to 11 Nm (95 in. lbs.), install them and reconnect the negative battery cable last.
Vibration Damper
53022162AA
Q:
How to Install the Harmonic Balancer on the Crankshaft on Dodge Durango?
A:
Before fitting the harmonic balancer to the Crankshaft, first clean both the bore of the balancer and the nose of the crankshaft to avoid damage. Misalign the harmonic balancer with the key on the crankshaft and press it down so that it is touching the crankshaft. Attach boring ring 8512-A by turning nut onto threaded rod, then placing roller bearing onto the rod so the hardened surface faces toward nut and next sliding hardened washer onto the rod. Use Mopar(R) Nickel Anti-Seze or an equivalent product to cover the threads of the threaded rod. Install the Balancer Installer 8512-A, pushing down on the balancer onto the crankshaft and torque the harmonic balancer bolt to 175 Nm (130 ft. lbs.). After that, put in the radiator fan and the accessory Drive Belt. The last step is to attach the negative cable to the battery.