How to Service and Repair an Air Bag Sensor in the D-Pillar on Dodge Durango?

The first step to accessing the side impact sensor is to disable the SRS by removing and isolating the negative cable from the battery and then letting the system capacitor drain for two minutes. Be sure the rivet nut holding the side impact sensor (4) is in the inner quarter panel, just in front of the C-pillar (3) and is properly set and clean, without rust. Position the side impact sensor close to the inside quarter panel and hook up the body wire harness connector (2) to the sensor's connector receptacle. Guide the sensor tight against the inner quarter panel to place the anti-rotation pin in hole (1) on the side panel. Join the sensor to the inner quarter panel by deflating the air, tightening the provided screw (5) to 6 Nm (50 in. lbs.). Attach the quarter trim panel to the vehicle's lower D-pillar. Do not secure the negative battery cable until the SRS verification test is done after you replace or service any SRS parts.

OEM Dodge Durango Air Bag Sensor

Air Bag Impact Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Air Bag Sensors found

View related parts
Dodge Durango Acceleration Sensor Part Number: 56054085AA
$197.14 MSRP: $294.00
You Save: $96.86 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor-Acceleration
- Position: Center
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2020 Dodge Durango | Citadel, Crew, Express, GT, GT Plus, Heat, Limited, Pursuit, R/T, Rallye, SRT, SXT, SXT Plus, Special Service | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.4 L GAS
View related parts
Dodge Durango Air Bag Sensor, Front Part Number: 4896061AB
$75.57 MSRP: $112.00
You Save: $36.43 (33%)
ADD TO CART
Product Specifications
- Other Name: Sensor - Impact; Air Bag Impact Sensor, Front, Rear; Impact Sensor; Front Impact Sensor; Front Sensor; Side Impact Sensor; Side Sensor; Sensor Impact C Pillar; Sensor Impact
- Position: Front
- Replaces: 4672311AA, 52851601AB, 4896061AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2009 Dodge Durango | Adventurer, Limited, Limited Hybrid, SE, SLT, SXT | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
View related parts
Dodge Durango Air Bag Sensor Part Number: 5084000AA
$202.38 MSRP: $287.00
You Save: $84.62 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Air Bag; Front Impact Sensor; Front Sensor; Side Impact Sensor; Side Sensor; Sensor Air Bag
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004-2007 Dodge Durango | Adventurer, Limited, SLT, ST, SXT | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
Dodge Durango Position Sensor Part Number: 68606352AA
$9.57 MSRP: $13.90
You Save: $4.33 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Acceleration
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2024-2025 Dodge Durango | Citadel, GT, GT Plus, GT Premium, Pursuit, R/T, R/T Plus, R/T Premium, SRT 392, SRT 392 Plus, SRT 392 Premium, SRT Hellcat, SRT Hellcat Plus, SRT Hellcat Premium, SXT, SXT Plus, Special Service | 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS
View related parts
Dodge Durango Sensor - Acceleration Part Number: 68606355AA
$14.57 MSRP: $16.30
You Save: $1.73 (11%)
ADD TO CART
Product Specifications
- Other Name: SENSOR-ACCELERATION
- Replaces: 68492236AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2025 Dodge Durango | Citadel, Crew, Express, GT, GT Plus, GT Premium, Heat, Limited, Pursuit, R/T, R/T Hemi Orange, R/T Plus, R/T Premium, Rallye, SRT, SRT 392, SRT 392 Plus, SRT 392 Premium, SRT Hellcat, SRT Hellcat Plus, SRT Hellcat Premium, SXT, SXT Plus, Special Service | 3.6L V6, 5.7L V8, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6.2L V8, 6.4L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS
View related parts
Dodge Durango Impact Sensor, Outer Part Number: 4896065AB
$194.09 MSRP: $274.00
You Save: $79.91 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Impact; Air Bag Impact Sensor, Outer; Air Bag Sensor; Side Impact Sensor; Side Sensor; Sensor Impact
- Position: Outer
- Replaces: 4896065AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2009 Dodge Durango | Adventurer, Limited, Limited Hybrid, SE, SLT, SXT | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
View related parts
Dodge Durango Side Impact Sensor Part Number: 56043168AA
Product Specifications
- Other Name: Sensor - Side Airbag Impact; Air Bag Sensor; Side Sensor; Sensor Side Airbag Impact
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004-2007 Dodge Durango | Adventurer, Limited, SLT, ST, SXT | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS

Dodge Durango Air Bag Sensor

Choose OEM Air Bag Sensor that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Air Bag Sensor follows strict manufacturing steps to lock in quality and fit. If your Dodge Durango matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Durango parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Dodge Durango Air Bag Sensor or the crash sensor is an important Safety Sensor in the Dodge Durango vehicles for optimal and safe performance. This small but important Air Bag Sensor is responsible for identifying the force and informing the control unit to release the air bags, which greatly increases the likelihood of passenger's survival in an accident. Through the years, different kinds of Dodge Durango models have the sophisticated Air Bag Sensors, all of which increases the interaction and efficiency of every air bag in various situations to enhance the safety of occupants. The Dodge Durango is a mid-size SUV with the first generation starting in the year 1998, the model has undergone transmissions with each of them receiving updates concerning safety devices like the Air Bag Sensor. Variations in different Durango models also make sure that there is compatibility of different versions hence safe and efficient to drive with. First of all, it is worth noting that there is a unique and highly effective product called Dodge Durango Air Bag Sensor; it can be called a discover, as it exists in the automotive market; Likely, this is due to its very reasonable and highly technologied design that guarantees safe driving for families or individuals. Because of the Dodge Durango's focus on performance and flexibility, the Air Bag Sensor is a critical component to ensuring safety for drivers and passengers. In conclusion the Dodge Durango Air Bag Sensor is more than a mere product; it is a crucial part that serves as a great addition to a car manufacturing to ensure that the safety as well as efficiency of all the passengers is observed.

Dodge Durango Air Bag Sensor Parts and Q&A

Air Bag Sensor, Front
4896061AB
Q: How to Service and Repair an Air Bag Sensor in the D-Pillar on Dodge Durango?
A:
The first step to accessing the side impact sensor is to disable the SRS by removing and isolating the negative cable from the battery and then letting the system capacitor drain for two minutes. Be sure the rivet nut holding the side impact sensor (4) is in the inner quarter panel, just in front of the C-pillar (3) and is properly set and clean, without rust. Position the side impact sensor close to the inside quarter panel and hook up the body wire harness connector (2) to the sensor's connector receptacle. Guide the sensor tight against the inner quarter panel to place the anti-rotation pin in hole (1) on the side panel. Join the sensor to the inner quarter panel by deflating the air, tightening the provided screw (5) to 6 Nm (50 in. lbs.). Attach the quarter trim panel to the vehicle's lower D-pillar. Do not secure the negative battery cable until the SRS verification test is done after you replace or service any SRS parts.