How to Remove the Instrument Cluster on Dodge Magnum?

Before removing the instrument panel, turn off the supplemental restraint system by isolating the negative battery cable and then wait for two minutes so the capacitor discharges. See to it that you never strike or drop the occupant restraint controller since this will affect the working of the impact sensor. First replace the Occupant Restraint Controller (ORC), test the system, then replace the Occupant Classification Module (OCM). First, raise and hold up the vehicle, before you disconnect the steering column from the steering coupling. Drop the car fully and pull the steering column from the vehicle. After that, unbolt the silencers on the left and right side of the instrument panel and then take out the screws that secure the cover onto the instrument panel. Take out the steering column cover by removing the wire harness connector from the trunk release switch and the hood release cable from the hood release handle. Separate the screws joining the cover reinforcement panel to the bracket and untie the body wire harness from the instrument panel and transmission control module connectors. Take off the center floor console and the ash receiver from the instrument panel. Detach the ORC module wire harness connector from the instrument panel wire harness and disconnect the antenna coax from the line that runs to the instrument panel. Remove all the wire harness connectors that are not needed from the instrument panel loop. Take away both the A-pillar trim panels and the wire harness connectors found there. Pull off the end caps on the instrument panel and remove the bolts connecting the side supports. After that, take out the defroster grille to reveal and remove the top retaining bolts. At the end, take out the bolts at the base of the instrument panel, lift the assembly from its supports, feed the steering column end through the dash panel hole and pull the panel out through the passenger door. If needed, pop out the spring nuts from the dash panel.

OEM Dodge Magnum Instrument Cluster

Speedometer Instrument Cluster

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

16 Instrument Clusters found

View related parts
Dodge Magnum Instrument Cluster Part Number: 56044944AI
Product Specifications
- Other Name: Cluster - Instrument Panel
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2007 Dodge Magnum | R/T, SE, SRT8, SXT | 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
Dodge Magnum Instrument Cluster Part Number: 5172062AE
Product Specifications
- Other Name: Cluster - Instrument Panel
- Replaces: 5172062AD, 5172062AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007 Dodge Magnum | SE, SXT | 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
Dodge Magnum Instrument Cluster Part Number: 56044946AI
Product Specifications
- Other Name: Cluster - Instrument Panel
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2007 Dodge Magnum | R/T, SE, SRT8, SXT | 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
Dodge Magnum Instrument Cluster Part Number: 5172121AG
Product Specifications
- Other Name: Cluster - Instrument Panel
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008 Dodge Magnum | R/T, SE, SRT8, SXT | 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
Dodge Magnum Instrument Cluster Part Number: 5172118AG
Product Specifications
- Other Name: Cluster - Instrument Panel
- Replaces: 5172118AB, 5172118AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008 Dodge Magnum | R/T, SE, SRT8, SXT | 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
Dodge Magnum Instrument Cluster Part Number: 5172065AF
Product Specifications
- Other Name: Cluster - Instrument Panel
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007 Dodge Magnum | R/T | 8 Cyl 5.7 L GAS
View related parts
Dodge Magnum Instrument Cluster Part Number: 5172064AE
Product Specifications
- Other Name: Cluster - Instrument Panel
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007 Dodge Magnum | R/T | 8 Cyl 5.7 L GAS
View related parts
Dodge Magnum Instrument Cluster Part Number: 5172063AF
Product Specifications
- Other Name: Cluster - Instrument Panel
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007 Dodge Magnum | SE, SXT | 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
Dodge Magnum Instrument Cluster Part Number: 5172053AF
Product Specifications
- Other Name: Cluster - Instrument Panel
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007 Dodge Magnum | R/T, SE, SRT8, SXT | 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
Dodge Magnum Instrument Cluster Part Number: 5030989AF
Product Specifications
- Other Name: Cluster - Instrument Panel
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008 Dodge Magnum | R/T, SE, SRT8, SXT | 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
Dodge Magnum Instrument Cluster Part Number: 5029974AF
Product Specifications
- Other Name: Cluster - Instrument Panel
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2007 Dodge Magnum | R/T, SE, SRT8, SXT | 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
Dodge Magnum Instrument Cluster Part Number: 4854642AF
Product Specifications
- Other Name: Cluster - Instrument Panel
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007 Dodge Magnum | SRT8 | 8 Cyl 6.1 L GAS
View related parts
Dodge Magnum Instrument Cluster Part Number: 4602499AE
Product Specifications
- Other Name: Cluster
- Replaces: 4602358AB, 4602499AC, 4602499AD, 4602358AC, 4602358AG, 4602358AD, 4602499AB, 4602499AA, 4602358AI, 4602358AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2006 Dodge Magnum | R/T | 5.7L V8, 8 Cyl 5.7 L GAS
View related parts
Dodge Magnum Instrument Cluster Part Number: 4602498AE
Product Specifications
- Other Name: Cluster - Instrument Panel
- Replaces: 4602356AC, 4602356AD, 4602356AG, 4602498AA, 4602356AE, 4602498AD, 4602498AB, 4602356AF, 4602498AC, 4602356AI
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2006 Dodge Magnum | SE, SRT8, SXT, SXT Special Edition | 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 8 Cyl 6.1 L GAS
View related parts
Dodge Magnum Instrument Cluster Part Number: 4602497AE
Product Specifications
- Other Name: Cluster - Instrument Panel
- Replaces: 4602354AC, 4602354AF, 4602497AD, 4602497AC, 4602497AB, 4602354AD, 4602497AA, 4602354AI, 4602354AE, 4602354AG
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2006 Dodge Magnum | SE, SRT8, SXT, SXT Special Edition | 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 8 Cyl 6.1 L GAS
View related parts
Dodge Magnum Instrument Cluster Part Number: 4602500AE
Product Specifications
- Other Name: Cluster
- Replaces: 4602359AF, 4602359AD, 4602359AG, 4602500AC, 4602359AI, 4602500AD, 4602359AC, 4602500AA, 4602359AB, 4602500AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2006 Dodge Magnum | R/T | 5.7L V8, 8 Cyl 5.7 L GAS

Dodge Magnum Instrument Cluster

Choose OEM Instrument Cluster that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Instrument Cluster follows strict manufacturing steps to lock in quality and fit. If your Dodge Magnum matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Magnum parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Instrument Cluster of Dodge Magnum automobiles is an important part installed behind the hub wheel which gives important data required for effective driving. This shows main trips including the speed meter, rev meter and fuel meter among others as well as warning signs and signals showing performance of the car, the engine, and safety features for instance the seat belt sign. In its years of production, Dodge Magnum has had several kinds of Instrument Clusters with the evolving era coming up with more enhancements on the designing aspect. These clusters not only present significant information but also adopt contemporary utilities as well as designs, both of which are functional and aesthetic. Having Instrument Cluster at its proper operating capacity is important to monitor the condition of the vehicle and when it fails, replacing the original factory set Instrument Cluster with remanufactured one is viable.

Dodge Magnum Instrument Cluster Parts and Q&A

Instrument Cluster
5030989AF
Q: How to Remove the Instrument Cluster on Dodge Magnum?
A:
Before removing the instrument panel, turn off the supplemental restraint system by isolating the negative Battery Cable and then wait for two minutes so the capacitor discharges. See to it that you never strike or drop the occupant restraint controller since this will affect the working of the impact sensor. First replace the Occupant Restraint Controller (ORC), test the system, then replace the Occupant Classification Module (OCM). First, raise and hold up the vehicle, before you disconnect the steering column from the steering coupling. Drop the car fully and pull the steering column from the vehicle. After that, unbolt the silencers on the left and right side of the instrument panel and then take out the screws that secure the cover onto the instrument panel. Take out the Steering Column Cover by removing the wire harness connector from the trunk release switch and the hood release cable from the hood release handle. Separate the screws joining the cover reinforcement panel to the bracket and untie the body wire harness from the instrument panel and transmission control module connectors. Take off the center floor console and the ash receiver from the instrument panel. Detach the ORC module wire harness connector from the instrument panel wire harness and disconnect the antenna coax from the line that runs to the instrument panel. Remove all the wire harness connectors that are not needed from the instrument panel loop. Take away both the A-pillar trim panels and the wire harness connectors found there. Pull off the end caps on the instrument panel and remove the bolts connecting the side supports. After that, take out the defroster grille to reveal and remove the top retaining bolts. At the end, take out the bolts at the base of the instrument panel, lift the assembly from its supports, feed the steering column end through the dash panel hole and pull the panel out through the passenger door. If needed, pop out the spring nuts from the dash panel.