How to Maintain and Fix a Muffler on Dodge Magnum?

If you are working on the muffler, start by raising your vehicle. After that, take off the two clamps that hold the catalytic converter to the muffler and resonator. After that, unscrew the nuts and remove the tunnel reinforcement. For this engine, take out the left-hand resonator and tailpipe assembly. After that, remove each of the four isolators. After that, twist and turn while removing the muffler and tailpipe assembly from the catalytic converters to finish the job.

How to Properly Service a Muffler on Dodge Magnum?

First, lift the vehicle and take off the catalytic converter, then remove the muffler and resonator clamps (2) and finish by undoing the two nuts and tunnel reinforcement (2). The 5.7L needs you to remove the LH resonator and tailpipe assembly and then take away the isolators (4) and remove the muffler and tailpipe assembly (5) by twisting it out of the catalytic converters. To set up the front exhaust pipe, fit the clamps to the pipe and put it into the two catalytic converters, so the isolators are facing forward about 100 degrees. With the 5.7L engine, fit the LH rear resonator and tailpipe assembly, ensuring nothing is touching or rubbing against the components beneath or in the engine compartment and tighten their clamps to specified torque. Subsequently, add the tunnel reinforcement and tighten it with the nuts provided, until you reach 25 Nm (215 inch lbs.). Check the distance between the muffler and resonator assembly and the fuel tank, so that there is 14 mm (0.55 inch) for the V8 and 16 mm (0.62 inch) for the V6 engines and make sure the rear tunnel reinforcement has between 15 - 20 mm (0.59 - 0.78 inch) of clearance. Set the tailpipe so it sits exactly in the opening on the rear and adjust the fit if needed. Then, lower the car, turn the engine on and check for leaks in the exhaust system; repair any leaks you find.

OEM Dodge Magnum Muffler

Exhaust Muffler

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

10 Mufflers found

View related parts
Dodge Magnum Muffler & Pipe, Passenger Side Part Number: 4854532AB
$604.85 MSRP: $1950.00
You Save: $1345.15 (69%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Muffler - Exhaust; Exhaust Muffler, Right; Exhaust Pipe; Muffler & Pipe Assembly; Muffler And Resonator Exhaust; Muffler
- Position: Passenger Side
- Replaces: 4854532AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2007 Dodge Magnum | SRT8 | 8 Cyl 6.1 L GAS
View related parts
Dodge Magnum Muffler & Pipe, Passenger Side Part Number: 4581868AG
$575.94 MSRP: $839.00
You Save: $263.06 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Muffler - Exhaust; Exhaust Muffler, Right; Exhaust Muffler Assembly; Exhaust X Pipe; Exhaust Pipe; Muffler & Pipe Assembly; Muffler And Resonator Exhaust; Exhaust Muffler; Muffler
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005 Dodge Magnum | R/T | 8 Cyl 5.7 L GAS
View related parts
Dodge Magnum Muffler & Pipe Part Number: E0019419AA
Product Specifications
- Other Name: Dual - Single Exhaust Kit; Exhaust Pipe; Muffler; Muffler And Resonator Exhaust
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008 Dodge Magnum | SE, SXT | 6 Cyl 3.5 L GAS
View related parts
Dodge Magnum Muffler & Pipe Part Number: E0019422AB
Product Specifications
- Other Name: Dual - Dual Exhaust Kit; Exhaust Pipe; Muffler; Muffler And Resonator Exhaust
- Replaces: E0019422
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008 Dodge Magnum | SE, SXT | 6 Cyl 3.5 L GAS
View related parts
Dodge Magnum Muffler & Pipe Part Number: 4578376AF
Product Specifications
- Other Name: Muffler - Exhaust; Exhaust Muffler; Exhaust Muffler Assembly; Exhaust Pipe; Muffler & Pipe Assembly; Muffler And Resonator Exhaust; Muffler
- Replaces: 4578376AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2008 Dodge Magnum | SE, SXT, SXT Special Edition | 6 Cyl 3.5 L GAS
View related parts
Dodge Magnum Muffler & Pipe Part Number: 4578378AF
Product Specifications
- Other Name: Muffler - Exhaust; Exhaust Muffler; Exhaust Muffler Assembly; Direct-Fit Exhaust; Exhaust System Kit; Exhaust Pipe; Muffler & Pipe Assembly; Muffler And Resonator Exhaust; Muffler
- Replaces: 4578378AD, 4578378AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2008 Dodge Magnum | SE | 2.7L V6, 6 Cyl 2.7 L GAS
View related parts
Dodge Magnum Muffler & Pipe, Passenger Side Part Number: 4578412AG
Product Specifications
- Other Name: Muffler - Exhaust; Right Exhaust Muffler Assembly; Direct-Fit Exhaust System Kit; X Pipe; Exhaust Pipe; Muffler & Pipe Assembly; Muffler And Resonator Exhaust; Exhaust Muffler; Muffler
- Position: Passenger Side
- Replaces: 4578412AB, 4578412AE, 4578412AC, 4578412AA, 4578412AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2008 Dodge Magnum | R/T | 5.7L V8, 8 Cyl 5.7 L GAS
View related parts
Dodge Magnum Muffler & Pipe, Passenger Side Part Number: 5290791AE
Product Specifications
- Other Name: Muffler - Exhaust; Exhaust Muffler, Right; Exhaust Pipe; Muffler & Pipe Assembly; Muffler And Resonator Exhaust; Muffler
- Position: Passenger Side
- Replaces: 5290791AD, 4854535AB, 4854535AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2008 Dodge Magnum | SRT8 | 6.1L V8, 8 Cyl 6.1 L GAS
- 2005 Dodge Magnum
View related parts
Dodge Magnum Muffler & Pipe, Passenger Side Part Number: 4581868AL
Product Specifications
- Other Name: Muffler - Exhaust; Exhaust Muffler, Right; Direct-Fit Exhaust; Exhaust System Kit; Exhaust Pipe; Muffler; Muffler & Pipe Assembly
- Position: Passenger Side
- Replaces: 4581868AK, 4581868AI, 4581868AH, 4581868AJ
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2007 Dodge Magnum | R/T | 5.7L V8, 8 Cyl 5.7 L GAS
View related parts
Dodge Magnum Muffler & Pipe, Passenger Side Part Number: 4581872AI
Product Specifications
- Other Name: Muffler - Exhaust; Right Exhaust Muffler Assembly; Direct-Fit Exhaust System Kit; X Pipe; Exhaust Pipe; Muffler And Resonator Exhaust; Exhaust Muffler; Muffler
- Position: Passenger Side
- Replaces: 4581872AE, 4581872AG, 4581872AC, 4581872AB, 4581872AD, 4581872AH
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2008 Dodge Magnum | R/T | 5.7L V8, 8 Cyl 5.7 L GAS

Dodge Magnum Muffler

Choose OEM Muffler that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Muffler follows strict manufacturing steps to lock in quality and fit. If your Dodge Magnum matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Magnum parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Therefore, the Dodge Magnum Muffler is a vital and dependable feature that speaks of performance in the Dodge automobiles. Intended for selected Magnum car models, this muffler is crucial in lessening the sound produced by the car's engine and at the same time preventing toxic gasses from entering the car's interior. Designed with reinforced sound-absorbing characteristics and using the top levels of the acoustic quieting technology, Dodge Magnum Muffler successfully reduces the sound pressure created by the gases moving at great speeds, thus, improving the drivers' comfort. Made of stainless steel or aluminized steel the Magnum Muffler is designed to perform optimally and built to last regardless of the daily usage. Due to this compatibility with other Magnum models, every car receives functionality improvements in terms of power, safety with regard to noise and emission standards. It comprises a number of chambers and channels and those are not only designed for sound attenuation but they are also used to control back pressure, an important factor for the efficiency of the car's engine. The two differing objectives of reducing sound levels and improving performance are evenly weighted in the Dodge Magnum Muffler in the automotive industry. Therefore apart from being just an expelled device, the Dodge Magnum Muffler has functional characteristics and a construction that makes it a performance and safety-related component of Dodge Magnum vehicles, setting it apart from its competitors for the more discerning driver.

Dodge Magnum Muffler Parts and Q&A

Muffler & Pipe, Passenger Side
4854532AB
Q: How to Maintain and Fix a Muffler on Dodge Magnum?
A:
If you are working on the muffler, start by raising your vehicle. After that, take off the two clamps that hold the Catalytic Converter to the muffler and resonator. After that, unscrew the nuts and remove the tunnel reinforcement. For this engine, take out the left-hand resonator and tailpipe assembly. After that, remove each of the four isolators. After that, twist and turn while removing the muffler and tailpipe assembly from the catalytic converters to finish the job.
Muffler & Pipe, Passenger Side
4581868AG
Q: How to Properly Service a Muffler on Dodge Magnum?
A:
First, lift the vehicle and take off the Catalytic Converter, then remove the muffler and resonator clamps (2) and finish by undoing the two nuts and tunnel reinforcement (2). The 5.7L needs you to remove the LH resonator and tailpipe assembly and then take away the isolators (4) and remove the muffler and tailpipe assembly (5) by twisting it out of the catalytic converters. To set up the front exhaust pipe, fit the clamps to the pipe and put it into the two catalytic converters, so the isolators are facing forward about 100 degrees. With the 5.7L engine, fit the LH rear resonator and tailpipe assembly, ensuring nothing is touching or rubbing against the components beneath or in the engine compartment and tighten their clamps to specified torque. Subsequently, add the tunnel reinforcement and tighten it with the nuts provided, until you reach 25 Nm (215 inch lbs.). Check the distance between the muffler and resonator assembly and the Fuel Tank, so that there is 14 mm (0.55 inch) for the V8 and 16 mm (0.62 inch) for the V6 engines and make sure the rear tunnel reinforcement has between 15 - 20 mm (0.59 - 0.78 inch) of clearance. Set the tailpipe so it sits exactly in the opening on the rear and adjust the fit if needed. Then, lower the car, turn the engine on and check for leaks in the exhaust system; repair any leaks you find.