How to Locate, Remove, and Install a Coolant Temperature Sensor on Dodge Neon?

You'll find the engine coolant temperature sensor at the end of the cylinder head. Before removing radiator fluid, confirm the engine is off and wait for it to cool. Afterward, drain the coolant until there is no more inside the cylinder head. After that, unplug the connector leading to the coolant sensor and take out the sensor. When putting in the coolant sensor, ensure it is tightened to 18 Nm (165 in. lbs.) torque. After that, put the electrical connector on the sensor and top up the cooling system.

How to Service a Coolant Temperature Sensor on Dodge Neon?

Before you work on the Engine Coolant Temperature (ECT) Sensor, it's important to allow the engine to cool and remove all the coolant until the level moves below the cylinder head. Following this, get rid of the coolant sensor by separating the coolant sensor's electrical connection from the engine. The first step in installation is to mount the coolant sensor and tighten it to a torque of 18 Nm (165 in. lbs.). After that, link the electrical cable to the sensor and finish the cooling system filling.

OEM Dodge Neon Coolant Temperature Sensor

Coolant Water Temperature Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Coolant Temperature Sensors found

View related parts
Dodge Neon Coolant Temperature Sensor Part Number: 56027873
$90.13 MSRP: $125.00
You Save: $34.87 (28%)
ADD TO CART
Product Specifications
- Other Name: Sensor - Coolant Temperature; Engine Coolant Temperature Sensor; Cooling Fan Temperature Switch; Temperature Sensor; Fan Switch; Temperature Coolant Sensor; Temperature Sending Unit; Sensor Coolant Temperature
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2000-2005 Dodge Neon | ACR, Base, ES, High Line, R/T, SE, SRT-4, SXT | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Dodge Neon Coolant Temperature Sensor Part Number: 5269870AB
$63.79 MSRP: $86.70
You Save: $22.91 (27%)
ADD TO CART
Product Specifications
- Other Name: Sensor - Coolant Temperature; Engine Coolant Temperature Sensor; Sender Unit, Coolant Temperature; Temperature Sensor; Temperature Coolant Sensor; Temperature Sending Unit; Sensor Coolant Temperature
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2005 Dodge Neon | SRT-4 | 4 Cyl 2.4 L GAS

Dodge Neon Coolant Temperature Sensor

Choose OEM Coolant Temperature Sensor that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Coolant Temperature Sensor follows strict manufacturing steps to lock in quality and fit. If your Dodge Neon matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Neon parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Coolant Temperature Sensor is used in Dodge Neon automobiles to regulate the temperature of the coolant so as to guarantee efficient working of the engine. This sensor is working in order to supply the necessary information to control the engines' work and fuel consumption. Some of the Neon's models over the years probably featured types of Coolant Temperature Sensors that had different designs or technologies than others, though the essentially of the device remained the same; a controller of coolant temperature. Hence some of these variations impact on its capability to detect temperature, light the spark plugs and relay information to the engine control unit. In conclusion, the Coolant Temperature Sensor is crucial for the functionality and reliability of Dodge Neon vehicles.

Dodge Neon Coolant Temperature Sensor Parts and Q&A

Coolant Temperature Sensor
56027873
Q: How to Locate, Remove, and Install a Coolant Temperature Sensor on Dodge Neon?
A:
You'll find the engine coolant temperature sensor at the end of the cylinder head. Before removing radiator fluid, confirm the engine is off and wait for it to cool. Afterward, drain the coolant until there is no more inside the cylinder head. After that, unplug the connector leading to the coolant sensor and take out the sensor. When putting in the coolant sensor, ensure it is tightened to 18 Nm (165 in. lbs.) torque. After that, put the electrical connector on the sensor and top up the cooling system.
Coolant Temperature Sensor
5269870AB
Q: How to Service a Coolant Temperature Sensor on Dodge Neon?
A:
Before you work on the Engine Coolant Temperature (ECT) Sensor, it's important to allow the engine to cool and remove all the coolant until the level moves below the cylinder head. Following this, get rid of the coolant sensor by separating the coolant sensor's electrical connection from the engine. The first step in installation is to mount the coolant sensor and tighten it to a torque of 18 Nm (165 in. lbs.). After that, link the electrical cable to the sensor and finish the cooling system filling.