How to Locate, Remove, and Install a Knock Sensor on Dodge Neon?

On the side of the cylinder block, before the starter, you will find the knock sensor. Begin by shutting off power to the knock sensor, then remove it with a crow foot socket. During installation, fine-tune the torque of the knock sensor to 10 Nm (7 ft. lbs.), since both under and over-tightening can influence the sensor and harm how the engine sparks. Afterwards, plug the electrical connector into the knock sensor.

OEM Dodge Neon Knock Sensor

Engine Knock Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Knock Sensors found

View related parts
Dodge Neon Knock Sensor Part Number: 5033316AB
$128.23 MSRP: $194.00
You Save: $65.77 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Knock; Ignition Knock (Detonation) Sensor; MAP Sensor; Sensor Knock
- Replaces: 5033316AA, 56028563AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2005 Dodge Neon | R/T, SE, SRT-4, SXT | 2.0L L4, 2.4L L4, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Dodge Neon Knock Sensor Part Number: 4557667
Product Specifications
- Other Name: Sensor - Knock; Ignition Knock (Detonation) Sensor; Sensor, Knock, 3.3-3.8 Engine; Sensor, Knock; Sensor Knock
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1995-2002 Dodge Neon | ACR, Base, ES, High Line, R/T, SE, Sport | 4 Cyl 2.0 L GAS

Dodge Neon Knock Sensor

Choose OEM Knock Sensor that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Knock Sensor follows strict manufacturing steps to lock in quality and fit. If your Dodge Neon matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Neon parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Dodge Neon is equipped with a Knock Sensor, which is used in maintaining the optimal performance of the engine as it identifies when knock is present and it is normally occasioned by incorrect ignition timing. This device communicates with the powertrain control module (PCM), which in turn alters the ignition timing in order to prevent detonation that is way beyond the normal course of the combustion cycle. Normally, the knock sensor used in the Dodge Neon is piezoelectric, which directly vibratory pressure peaks to detect the knocking sound and monitor it continuously. When knock is sensed, the PCM reduces the ignition timing step by step until normal combustion is achieved while timing is gradually enriched after that. This mechanism also makes sure that the Dodge Neon runs smoothly on lower octane fuel, at the same time warding off any potential harm to the engine.

Dodge Neon Knock Sensor Parts and Q&A

Knock Sensor
4557667
Q: How to Locate, Remove, and Install a Knock Sensor on Dodge Neon?
A:
On the side of the cylinder block, before the starter, you will find the knock sensor. Begin by shutting off power to the knock sensor, then remove it with a crow foot socket. During installation, fine-tune the torque of the knock sensor to 10 Nm (7 ft. lbs.), since both under and over-tightening can influence the sensor and harm how the engine sparks. Afterwards, plug the electrical connector into the knock sensor.