How Do A/C Compressor Cut-Out Switches Relate to High Pressure Sensor Service and Repair on Dodge Ram 1500?

Isolate the battery's negative cable before you begin service on the high pressure sensor/switch. Detach the wire harness connector from the a/c high pressure switch on the fitting between the compressor charge and the condenser inlet. Take out the high pressure switch from the discharge line fitting and remove it by pulling it from the a/c unit. During installation, grease the new O-ring with clean refrigerant oil, then insert it into the line fitting on the discharge side. Use only the O-ring made of special material for R-134a and the recommended refrigerant oil for the compressor. Then, attach the high pressure cut-off switch to the discharge line fitting and tighten it by hand, connect the wire harness to the switch and link the battery negative cable back.

OEM Dodge Ram 1500 A/C Compressor Cut-Out Switches

HVAC Cut-Out Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 A/C Compressor Cut-Out Switches found

View related parts
Dodge Ram 1500 Pressure Switch Part Number: 4897617AA
Product Specifications
- Other Name: Switch - A/C High Pressure Cut Off; HVAC Pressure Switch; A/C Compressor Cut-Out; Trinary Switch.; Lower Pressure Cut-Off Switch; High Pressure Cut-Off Switch; Switch; Switch A/C High Pressure Cut Off
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2000-2002 Dodge Ram 1500 | Laramie, SLT, ST, Sport, WS | 6 Cyl 3.7 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
Dodge Ram 1500 Pressure Switch Part Number: 4773190
Product Specifications
- Other Name: A/C High Pressure Cut Off; HVAC Pressure/Trinary Switch; Compressor Cut-Out; Refrigerant Hose; High Pressure Cut-Off Switch; Hose & Tube Assembly; A/C High Pressure Cut Off; Compressor Kit.
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1994-1999 Dodge Ram 1500 | Base, LT, Laramie, SS/T 5.9L, ST, Sport, WS | 6 Cyl 3.9 L GAS, 8 Cyl 5.2 L CNG, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS

Dodge Ram 1500 A/C Compressor Cut-Out Switches

Choose OEM A/C Compressor Cut-Out Switches that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each A/C Compressor Cut-Out Switches follows strict manufacturing steps to lock in quality and fit. If your Dodge Ram 1500 matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Ram 1500 parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Dodge Ram 1500 A/C Compressor Cut-Out Switches are important components that make the status of the air conditioning system of the automotive vehicle more reliable and high performing. The high amperage contact type switches have a long-life because of the high quality they possess and they are essential in protecting the A/C compressor since they control the discharge pressure and cut power supply if the pressure reaches a stipulated level. This basically acts as a protective method that eliminates possibilities of system breakdowns, thus promoting the durability of the Ram 1500's refrigeration system. These are A/C Compressor Cut-Out Switches that fit the Dodge Ram 1500 compatible with several models and are useful in creating efficiency and safety when driving in different models. The Dodge Ram 1500 is known for its solidity and towing capabilities and adding A/C Compressor Cut-Out Switches of high quality makes it all the more popular in the market place. In particular, it is necessary to emphasize that these switches have a built-in pressure control system that simultaneously contributes to the protection of the compressor and the savings of fuel by preventing its unnecessary consumption. Since the Dodge A/C Compressor Cut-Out Switches are easy to connect and can be introduced into the Ram 1500's existing systems, they directly demonstrate the brand's dedication to creating inventive products. In sum, the Dodge Ram 1500 A/C Compressor Cut-Out Switches are essential for every car owner who wants to have a comfortable ride, as well as receive the vehicle maximum performance.

Dodge Ram 1500 A/C Compressor Cut-Out Switches Parts and Q&A

Pressure Switch
4897617AA
Q: How Do A/C Compressor Cut-Out Switches Relate to High Pressure Sensor Service and Repair on Dodge Ram 1500?
A:
Isolate the battery's negative cable before you begin service on the high pressure sensor/switch. Detach the wire harness connector from the a/c high pressure switch on the fitting between the compressor charge and the condenser inlet. Take out the high pressure switch from the discharge line fitting and remove it by pulling it from the a/c unit. During installation, grease the new O-ring with clean refrigerant oil, then insert it into the line fitting on the discharge side. Use only the O-ring made of special material for R-134a and the recommended refrigerant oil for the compressor. Then, attach the high pressure cut-off switch to the discharge line fitting and tighten it by hand, connect the wire harness to the switch and link the battery negative cable back.