If you need to service or repair the shifter, begin with trim stick C-4755 or any other equivalent tool to take off the console bezel trim ring. Then, remove the rubber insert and also take out the fasteners that are at the front part of the console bezel. Again, using trim stick C-4755 or another similar tool, take out the console bezel. After that, pull out the rubber liners from the center tray and cup holders on the console panel's Prndl side and take out the fasteners. Above the firewall, you can find the power outlet harness and the shifter harness. Disconnect these two harnesses from their connectors. Makes sure the shifter is in park, remove the fasteners and move the shifter assembly to expose the cable end. Take the shift cable retainer off the bracket, pull the shifter cable end from the shifter lever and then remove the entire shifter assembly.