How to Install a Tie Rod on Dodge Ram 2500?

The tie rod end is attached to the left steering knuckle and drag link with nuts tightened to 54Nm (40ft.lbs) plus an additional 90° of turn after which it is installed (Figure 133). After removing the supports, lower the vehicle on the surface, centre the steering wheel and adjust the toe. Once the adjustment has been made, the tie rod adjustment sleeve clamp bolts should be tightened to 61 Nm (45 ft. lbs.). Make sure that the clamp is positioned onto the sleeve with the retaining bolt on the bottom side.

OEM Dodge Ram 2500 Tie Rod

Steering Tie Rod

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

10 Tie Rods found

View related parts
Dodge Ram 2500 Tie Rod, Inner Part Number: 68036940AD
$151.64 MSRP: $231.00
You Save: $79.36 (35%)
ADD TO CART
Product Specifications
- Other Name: Package - Steering; Steering Drag Link, Inner; Drag Link Repair Kit; Steering Tie Rod End; Center Link; Tie Rod End; Drag Link; Drag Link Steering; Steering Drag Link
- Position: Inner
- Replaces: 68036940AB, 68036940AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2010 Dodge Ram 2500 | Laramie, Power Wagon, SLT, ST, SXT, TRX | 5.7L V8, 5.9L L6, 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL, 6.7L L6, 8 Cyl 5.7 L GAS
View related parts
Dodge Ram 2500 Tie Rod Part Number: 52106984AA
$369.84 MSRP: $468.84
You Save: $99.00 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Drag Link Repair Kit; Steering Tie Rod End; Center Link; Drag Link; Center Link Assembly; Socket Tie Rod Inner
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2000-2002 Dodge Ram 2500 | Base | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 8 Cyl 5.9 L GAS
View related parts
Dodge Ram 2500 Inner Tie Rod Part Number: 68040228AA
$58.74 MSRP: $128.00
You Save: $69.26 (55%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Kit - Inner End; Steering Tie Rod End, Inner, Right; Drag Link Repair Kit; Inner Tie Rod End; Tie Rod Kit Inner End; Steering Tie Rod End
- Position: Inner
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2010 Dodge Ram 2500 | Laramie, Power Wagon, SLT, ST, SXT, TRX | 6 Cyl 6.7 L DIESEL, 8 Cyl 5.7 L GAS
View related parts
Dodge Ram 2500 Tie Rod End, Outer Driver Side Part Number: 68038054AF
$69.83 MSRP: $154.00
You Save: $84.17 (55%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Package - Outer End; Steering Tie Rod End, Left; Drag Link Repair Kit; Outer Tie Rod End; Inner Tie Rod; Outer Tie Rod
- Position: Outer Driver Side
- Replaces: 68038054AD, 68038054AE, 68038054AB, 68038054AC, 68038054AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2010 Dodge Ram 2500 | Laramie, Power Wagon, SLT, ST, SXT, TRX | 5.7L V8, 5.9L L6, 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL, 6.7L L6, 8 Cyl 5.7 L GAS
View related parts
Dodge Ram 2500 Inner Tie Rod, Outer Part Number: 68038055AD
$297.25 MSRP: $453.00
You Save: $155.75 (35%)
ADD TO CART
Product Specifications
- Other Name: Package - Outer End; Steering Tie Rod End, Outer, Right, Right Outer; Drag Link Repair Kit; Outer Tie Rod End; Outer Tie Rod; Tie Rod Kit Outer End; Steering Tie Rod End; Tie Rod End
- Position: Outer
- Replaces: 68038055AC, 68038055AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2010 Dodge Ram 2500 | Laramie, Power Wagon, SLT, ST, SXT, TRX | 5.7L V8, 5.9L L6, 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL, 6.7L L6, 8 Cyl 5.7 L GAS
View related parts
Dodge Ram 2500 Tie Rod Part Number: 5017671AA
$111.50 MSRP: $141.34
You Save: $29.84 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tie Rod - Tie Rod End; Steering Tie Rod End; Drag Link; Inner Tie Rod; Socket Package Tie Rod End Inner; Tie Rod End
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2002 Dodge Ram 2500 | Base | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 8 Cyl 5.9 L GAS
View related parts
Dodge Ram 2500 Inner Tie Rod Part Number: 5086143AB
Product Specifications
- Other Name: Tie Rod; Steering Drag Link, Inner; Drag Link Repair Kit; Steering Tie Rod End; Inner Tie Rod End; Socket Package Drag Link Inner; End Package Tie Rod
- Position: Inner
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2007 Dodge Ram 2500 | Laramie, Power Wagon, SLT, ST, Sport, TRX4 | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL, 8 Cyl 5.7 L GAS
View related parts
Dodge Ram 2500 Tie Rod Part Number: 5017670AA
Product Specifications
- Other Name: Tie Rod - Tie Rod End; Steering Tie Rod End; Outer Tie Rod End; Drag Link; Outer Tie Rod; Socket Package Tie Rod End Outer; Tie Rod End
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2002 Dodge Ram 2500 | Base | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 8 Cyl 5.9 L GAS
View related parts
Dodge Ram 2500 Inner Tie Rod Part Number: 68032244AA
Product Specifications
- Other Name: Tie Rod E - Inner End; Steering Tie Rod End, Inner; Drag Link Repair Kit; Inner Tie Rod End; Tie Rod Kit Inner End; Steering Tie Rod End; Tie Rod End
- Position: Inner
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2008 Dodge Ram 2500 | Laramie, Power Wagon, SLT, ST, SXT, Sport, TRX4 | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL, 8 Cyl 5.7 L GAS
View related parts
Dodge Ram 2500 Tie Rod Part Number: 52037574
Product Specifications
- Other Name: Steering Tie Rod End; Drag Link; Link Assembly; Tie Rod Assembly, Front Suspension; Tie Rod Steering
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1994-1997 Dodge Ram 2500 | Base | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 8 Cyl 5.2 L CNG, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS

Dodge Ram 2500 Tie Rod

Choose OEM Tie Rod that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Tie Rod follows strict manufacturing steps to lock in quality and fit. If your Dodge Ram 2500 matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Ram 2500 parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Dodge Ram 2500 Tie Rod is a part of steering linkage that transmits motion from the steering gear to the steering knuckles, giving the front wheels the turning function based on the driver input. An assembly that connects the Pitman arm or rack housing to each wheel end via ball-and-socket joints, allowing the linkage to move side to side, and also allowing the vertical suspension travel. The Ram 2500 Tie Rod features consistent articulation that allows for bump accommodation without steering slack. The Tie Rod typically consists of an inner and outer section. The inner section threads into the steering rack or center link; the outer section connects to the steering arm at the knuckle. An adjusting sleeve links the two so the overall length can be set for proper wheel alignment. Excess free play, worn sockets or damaged dust boots may indicate a need to inspect or replace the Tie Rod. The Tie Rod is essential to maintain precise control of a Dodge Ram 2500 steering system and keep the car tracking accurately on the road to avoid negatively impacting overall Dodge handling for any Ram 2500 driver.

Dodge Ram 2500 Tie Rod Parts and Q&A

Tie Rod, Inner
68036940AD
Q:
How to Install a Tie Rod on Dodge Ram 2500?
A:
The tie rod end is attached to the left Steering Knuckle and drag link with nuts tightened to 54Nm (40ft.lbs) plus an additional 90° of turn after which it is installed (Figure 133). After removing the supports, lower the vehicle on the surface, centre the Steering Wheel and adjust the toe. Once the adjustment has been made, the tie rod adjustment sleeve clamp bolts should be tightened to 61 Nm (45 ft. lbs.). Make sure that the clamp is positioned onto the sleeve with the retaining bolt on the bottom side.