How to Remove an A/C System Valve Core on Dodge Ram 3500?

Before removing the core, you should start by removing the protective cap from the service port. Once that's done, remove the refrigerant from the refrigeration system. Take away the Schrader valve core using the right tool. Make sure to install a plug in or use tape to cover the opened service port.

How to Install an A/C System Valve Core on Dodge Ram 3500?

Before installing the service port valve core, first rub clean and recommended refrigerant oil over the valve core (3). Take off the tape or remove the plug from the service port (2). Make certain that the nut on the valve core is fully tightened in the A/C service port to avoid problems with refrigerant during the removal and adding of refrigerant to the system, as loose connections might allow refrigerant to escape when uncoupling the adapters. Insert the Schrader type valve core tool into the valve, then press it in to get the valve core into the service port(s). After you have installed it, properly evacuate and charge the refrigerant system. Make sure to attach the protective cap (1) to the service port to seal it and shield the system from contamination and reattach it when the service is done.

OEM Dodge Ram 3500 A/C System Valve Core

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 A/C System Valve Cores found

View related parts
Dodge Ram 3500 Check Valve Part Number: 5003461AA
$21.66 MSRP: $31.95
You Save: $10.29 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve Core - A/C Line, Low Side Adapter; Service Valve; HVAC Pressure Switch; A/C Trinary Switch; Pressure Switch; Service Valve; Suction Line Valve; Discharge Line Valve; Tube Assembly Valve.
- Replaces: 5011346AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2002-2010 Dodge Ram 3500 | Laramie, SLT, ST, SXT | 5.7L V8, 5.9L L6, 6 Cyl 6.7 L DIESEL, 8 Cyl 5.7 L GAS, 8.0L V10
View related parts
Dodge Ram 3500 Check Valve Part Number: 5179284AA
$16.93 MSRP: $25.05
You Save: $8.12 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve - A/C Line; High & Low Side Charging Adapters; Compressor Cut-Out Switch; System Valve Core; Fill Valve; Liquid Line Valve; Valve; Valve Core A/C Line; Valve Charging
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2010 Dodge Ram 3500 | Laramie, SLT, ST, SXT | 6 Cyl 6.7 L DIESEL, 8 Cyl 5.7 L GAS
View related parts
Dodge Ram 3500 Liquid Line Valve Part Number: 5073614AA
Product Specifications
- Other Name: Valve - A/C Line; A/C Low Side Charging Adapter; A/C Compressor Cut-Out Switch; A/C System Valve Core; Valve; Valve Core A/C Line
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2009 Dodge Ram 3500 | Laramie, SLT, ST, SXT | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL, 8 Cyl 5.7 L GAS
View related parts
Dodge Ram 3500 Pressure Valve Part Number: 5189365AB
Product Specifications
- Other Name: Valve - A/C Line; A/C Compressor Cut-Out Switch; A/C System Valve Core; Liquid Line Valve; Valve; Valve Core A/C Line
- Replaces: 5189365AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2009 Dodge Ram 3500 | Laramie, SLT, SXT | 6 Cyl 6.7 L DIESEL, 6.7L L6

Dodge Ram 3500 A/C System Valve Core

Choose OEM A/C System Valve Core that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each A/C System Valve Core follows strict manufacturing steps to lock in quality and fit. If your Dodge Ram 3500 matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Ram 3500 parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Dodge Ram 3500 A/C System Valve Core functions as a crucial element which assures both reliability and performance of its associated air conditioning system. This one-way valve enables refrigerant entry into the system but also stops backflow which is essential to operate at optimal pressure and maintain efficiency. The Dodge Ram 3500 went through different versions of the A/C System Valve Core as new model years emerged to achieve performance goals along with compatibility requirements in order to optimize A/C system performance. The reliability of this core ensures complete cooling performance during demanding driving conditions which drivers of Dodge Ram 3500 require. The A/C System Valve Core participates in both improving vehicle efficiency as it helps achieve system safety by stopping refrigerant leaks which would affect system operation. A standout feature of the Dodge Ram 3500 A/C System Valve Core exists from its strong components that match a wide selection of Ram 3500 vehicle models thus earning trust among users for air conditioning system maintenance. Drivers can depend on their Dodge model A/C System Valve Core for dependable performance and comfort delivery according to the brand standards of durability and efficiency.

Dodge Ram 3500 A/C System Valve Core Parts and Q&A

Check Valve
5003461AA
Q: How to Remove an A/C System Valve Core on Dodge Ram 3500?
A:
Before removing the core, you should start by removing the protective cap from the service port. Once that's done, remove the refrigerant from the refrigeration system. Take away the Schrader valve core using the right tool. Make sure to install a plug in or use tape to cover the opened service port.
Check Valve
5179284AA
Q: How to Install an A/C System Valve Core on Dodge Ram 3500?
A:
Before installing the service port valve core, first rub clean and recommended refrigerant oil over the valve core (3). Take off the tape or remove the plug from the service port (2). Make certain that the nut on the valve core is fully tightened in the A/C service port to avoid problems with refrigerant during the removal and adding of refrigerant to the system, as loose connections might allow refrigerant to escape when uncoupling the adapters. Insert the Schrader type valve core tool into the valve, then press it in to get the valve core into the service port(s). After you have installed it, properly evacuate and charge the refrigerant system. Make sure to attach the protective cap (1) to the service port to seal it and shield the system from contamination and reattach it when the service is done.