Before you touch any parts of the
Air Bag system, remove the negative
Battery Cable(s) and wait a minimum of two minutes for the capacitor to drain. Line the craft up on a solid and flat surface, then unhook the negative battery cable(s) and, using the procedures for Restraint Systems, remove the air bag module. After that, get the switch-to-steering wheel mounting screws out, along with the switch and the electrical connector at the switch. First, attach the electrical connector to the switch, place the switch securely in the hole provided and tighten the mounting screws to a torque of 3 Nm (26 in. lbs. ± 2 in. lbs.) Disassemble the air bag module, then reinstall and disconnect the negative battery cable(s) as described in Restraint Systems.