How to Service and Repair a Sway Bar Bushing on Dodge Ram 3500?

Before repairing the sway bar bushing, take out the control arm bushing with tools 8682-2 (adapter), 8682-3 (receiver) and 8682-4 (driver), together with the threaded rod and the two bearings. Before working, take out the crossmember and support it in a vise. After that, coat the threaded parts of the tool with heavy lubricant for better and lasting use. Make use of 8838, 8835-1, 8835-4 and 8835-3 tools to compress out the bushing. The lower control arm bushings in 2WD (LD) must be changed, because the bushings from HD 4X2 models are not replaceable. After you remove the lower control arm and put it in a vise, apply a lot of lubricant to the new lower arm. When working with large bushings, use the receiver (tool 8836-2), the spacer (tool 8836-4) and the driver (tool 8836-5), together with the threaded rod 8839 and the bearing. To fit the small bushing, take tool 8836-6, also use 8836-3 and 8836-2 together with the threaded rod 8839 and the bearing. Install Crossmember Bushing using tools 8835-2, 8835-4 and 8835-3 so the new bushing is put in, along with the bearing and threaded rod 8838 and remove the crossmember only when both sides have been installed correctly. Once you have reset the vehicle's ride height, do a wheel alignment. When fitting lower control arm bushings, use tools 8836-2, 8836-1 and 8836-4 together with bearing and threaded rod 8839 for the large fitting. For the small fitting, use tools 8836-7, 8836-2 and 8836-3 together with the bearing and threaded rod 8839. Bring the removed control arm out of the vise, place the lower one in its place, adjust the ride height and do a wheel alignment.

OEM Dodge Ram 3500 Sway Bar Bushing

Stabilizer Sway Bar Bushing

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

14 Sway Bar Bushings found

View related parts
Dodge Ram 3500 Link Bushing, Front Part Number: 52037916
$14.57 MSRP: $26.05
You Save: $11.48 (45%)
ADD TO CART
Product Specifications
- Other Name: Grommet - Stabilizer Bar; Suspension Stabilizer Bar Link Bushing, Front; Sway Bar Bushing; Stabilizer Link Grommet; Grommet Stabilizer Bar; Grommet, Front Link; Grommet, Link; Grommet Link
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1994-2010 Dodge Ram 3500 | Base, Laramie, SLT, ST, SXT, Sport, TRX4 | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL, 8 Cyl 5.7 L GAS, 8 Cyl 5.9 L GAS
View related parts
Dodge Ram 3500 Stabilizer Bar Bushing, Front Part Number: 52013793AB
$91.82 MSRP: $140.00
You Save: $48.18 (35%)
ADD TO CART
Product Specifications
- Other Name: Bushing - Stabilizer Bar; Suspension Stabilizer Bar Bushing, Front; Sway Bar Bushing; Bushings; Bushing Stabilizer Bar
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2010 Dodge Ram 3500 | Laramie, SLT, ST, SXT | 6 Cyl 6.7 L DIESEL
View related parts
Dodge Ram 3500 Stabilizer Bar Bushing, Front Part Number: 52013793AA
$30.83 MSRP: $45.95
You Save: $15.12 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bushing - Stabilizer Bar; Front Suspension Stabilizer Bar Bushing Kit; Sway Bar Bushing Kit.; Bushings; Bushing Stabilizer Bar
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2009 Dodge Ram 3500 | Laramie, SLT, ST, SXT | 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL, 8 Cyl 5.7 L GAS
View related parts
Dodge Ram 3500 Stabilizer Bar Bushing, Front Part Number: 52113085AB
$22.08 MSRP: $32.65
You Save: $10.57 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bushing - Stabilizer Bar; Front Suspension Stabilizer Bar Bushing Kit; Sway Bar Bushing.; Bushings; Bushing Stabilizer Bar
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2008 Dodge Ram 3500 | Laramie, SLT, ST, SXT, Sport, TRX4 | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL, 8 Cyl 5.7 L GAS
View related parts
Dodge Ram 3500 Stabilizer Bar Bushing, Front Part Number: 55398036AA
$23.26 MSRP: $33.70
You Save: $10.44 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bushing - Stabilizer Bar; Suspension Stabilizer Bar Bushing, Front; Sway Bar Bushing; Bushings; Bushing Stabilizer Bar
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2010 Dodge Ram 3500 | Laramie, SLT, ST, SXT | 6 Cyl 6.7 L DIESEL
View related parts
Dodge Ram 3500 Stabilizer Bar Bushing, Front Part Number: 52013779AB
$25.93 MSRP: $38.40
You Save: $12.47 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bushing - Stabilizer Bar; Suspension Stabilizer Bar Bushing, Front; Sway Bar Bushing; Bushings; Bushing Stabilizer Bar
- Position: Front
- Replaces: 52013779AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2010 Dodge Ram 3500 | Laramie, SLT, ST, SXT | 6 Cyl 6.7 L DIESEL
View related parts
Dodge Ram 3500 Stabilizer Bar Bushing, Front Part Number: 52013697AB
$25.93 MSRP: $38.40
You Save: $12.47 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bushing - Stabilizer Bar; Suspension Stabilizer Bar Bushing, Front; Sway Bar Bushing; Bushings; Bushing Stabilizer Bar
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2010 Dodge Ram 3500 | Laramie, SLT, ST, SXT | 6 Cyl 6.7 L DIESEL
View related parts
Dodge Ram 3500 Stabilizer Bar Bushing, Front Part Number: 52013697AA
$25.93 MSRP: $38.40
You Save: $12.47 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bushing - Stabilizer Bar; Front Suspension Stabilizer Bar Bushing Kit; Sway Bar Bushing Kit.; Stabilizer Bar Clamp; Bushings; Bushing Stabilizer Bar
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2009 Dodge Ram 3500 | Laramie, SLT, ST, SXT, Sport, TRX4 | 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL, 8 Cyl 5.7 L GAS
View related parts
Dodge Ram 3500 Stabilizer Bar Bushing, Front Part Number: 52038851
Product Specifications
- Other Name: Bushing - Stabilizer Bar; Suspension Stabilizer Bar Bushing, Front; Sway Bar Bushing; Stabilizer Bushing; Bushings; Bushing, Front Stabilizer; Bushing, Stabilizer Bar; Bushing Stabilizer Bar
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1994-2002 Dodge Ram 3500 | Base | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 8 Cyl 5.9 L GAS
View related parts
Dodge Ram 3500 Stabilizer Bar Bushing Part Number: 52106898AA
Product Specifications
- Other Name: Bushing - Stabilizer Bar; Sway Bar Bushing; Bushings; Bushing Stabilizer Bar
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2002 Dodge Ram 3500 | Base | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 8 Cyl 5.9 L GAS
View related parts
Dodge Ram 3500 Stabilizer Bar Bushing Part Number: 52106897AA
Product Specifications
- Other Name: Bushing - Sway Bar; Sway Bar Bushing; Bushings; Bushing Stabilizer Bar
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2002 Dodge Ram 3500 | Base | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 8 Cyl 5.9 L GAS
View related parts
Dodge Ram 3500 Stabilizer Bar Bushing Part Number: 52038843
Product Specifications
- Other Name: Bushing Sway Bar; Sway Bar Bushing; Bushing, Rear Stabilizer Bar; Bushing Stabilizer Bar
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1997-2002 Dodge Ram 3500 | Base | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 8 Cyl 5.9 L GAS
View related parts
Dodge Ram 3500 Stabilizer Bar Bushing, Orange Part Number: 52037548
Product Specifications
- Other Name: Bushing - Stabilizer Bar; Sway Bar Bushing; Bushings; Bushing, Rear Stabilizer Bar; Bushing Stabilizer Bar; Cushion, Stabilizer
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1997-2002 Dodge Ram 3500 | Base | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 8 Cyl 5.9 L GAS
View related parts
Dodge Ram 3500 Stabilizer Bar Bushing, Front Part Number: 52013406AA
Product Specifications
- Other Name: Bushing - Sway Bar; Front Suspension Stabilizer Bar Bushing Kit.; Stabilizer Bar Cushion; Bushings; Bushing Stabilizer Bar
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2009, 1994-1996 Dodge Ram 3500 | Base, Laramie, SLT, ST, SXT, Sport, TRX4 | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL, 8 Cyl 5.7 L GAS, 8 Cyl 5.9 L GAS

Dodge Ram 3500 Sway Bar Bushing

Choose OEM Sway Bar Bushing that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Sway Bar Bushing follows strict manufacturing steps to lock in quality and fit. If your Dodge Ram 3500 matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Ram 3500 parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Dodge Ram 3500 Sway Bar Bushing is one of the parts that increase the reliability of the Dodge Ram 3500 series. Intended to dampen vibrations resulting from contact with roads, and reduce noise, the Sway Bar Bushing holds part of the sway bar, or the stabilizer bar, a component that is very important in maintaining the car's stability during turning. This feature is quite significant for different types of Ram 3500 vehicles, as it contributes to the vehicle's stability, which directly impacts fuel efficiency as well as safety of the vehicle. The Sway Bar Bushing for Dodge Ram 3500 requires proper maintenance; bushing that has become bad usually affects the steady response of a vehicle and can also produce an annoying rattling sound that changes the driving conditions. Dodge Ram 3500 has a solid built and highly sophisticated in terms of engineering; some of its unique features are the full floating axles which enhances the distribution of weight and the amount of force exerted to the wheels. The Sway Bar Bushing is helpful in this regard as it closely keeps the integrity of the suspension system so as to improve its handling. Also, construction of the Dodge Ram 3500 Sway Bar Bushing is very versatile since it fits a variety of models of trucks. The model is popular in the automotive market because of its reliability and powerful engine which guarantees that a Dodge Ram 3500 can be a great workhorse and a fun toy. Altogether, the kind of take executed through the Dodge Ram 3500 Sway Bar Bushing suggests the company's dedication to quality and advancement that has shaped the vehicle and its bearing as a pioneer in the category of full-size pickups.

Dodge Ram 3500 Sway Bar Bushing Parts and Q&A

Stabilizer Bar Bushing, Front
52113085AB
Q: How to Service and Repair a Sway Bar Bushing on Dodge Ram 3500?
A:
Before repairing the sway bar bushing, take out the Control Arm Bushing with tools 8682-2 (adapter), 8682-3 (receiver) and 8682-4 (driver), together with the threaded rod and the two bearings. Before working, take out the crossmember and support it in a vise. After that, coat the threaded parts of the tool with heavy lubricant for better and lasting use. Make use of 8838, 8835-1, 8835-4 and 8835-3 tools to compress out the bushing. The lower Control Arm bushings in 2WD (LD) must be changed, because the bushings from HD 4X2 models are not replaceable. After you remove the lower control arm and put it in a vise, apply a lot of lubricant to the new lower arm. When working with large bushings, use the receiver (tool 8836-2), the spacer (tool 8836-4) and the driver (tool 8836-5), together with the threaded rod 8839 and the bearing. To fit the small bushing, take tool 8836-6, also use 8836-3 and 8836-2 together with the threaded rod 8839 and the bearing. Install Crossmember Bushing using tools 8835-2, 8835-4 and 8835-3 so the new bushing is put in, along with the bearing and threaded rod 8838 and remove the crossmember only when both sides have been installed correctly. Once you have reset the vehicle's ride height, do a wheel alignment. When fitting lower control arm bushings, use tools 8836-2, 8836-1 and 8836-4 together with bearing and threaded rod 8839 for the large fitting. For the small fitting, use tools 8836-7, 8836-2 and 8836-3 together with the bearing and threaded rod 8839. Bring the removed control arm out of the vise, place the lower one in its place, adjust the ride height and do a wheel alignment.