OEM Dodge Ram 3500 Van Washer Reservoir

Dodge Ram 3500 Van Washer Reservoir Parts and Q&A

• Washer Reservoir
  5011243AA
  Q: How to service the windshield washer reservoir on Dodge Ram 3500 Van?

  A:

  Before working on the reservoir, make sure to cut off the battery negative cable. Take out the two screws at the top of the washer reservoir to the radiator panel and then uplift the reservoir to break it free from the lower panel. Lefly, also loosen the connection at the washer fluid level switch and then at the washer pump/motor, for the harness wires. Release the hose for the washer supply from the pump/motor's barbed nipple, collect the washer fluid in a clean container and then lift the washer reservoir out of the radiator's closing panel. After removing the washer reservoir, fit it back onto the radiator, link the washer hose to the barbed fitting on the panel and plug in the wire links found in the headlamp and dash parts at the washer pump/motor unit and the washer fluid level switch. Slide the tab from the reservoir into the hole in the bracket, then hold the reservoir in place and secure by tightening the screws above it to 6 N.m (50 in. lbs.). Put the washer fluid back in the reservoir, making sure it's full and then reattach the battery negative cable.