What Are A/C Compressor Cut-Out Switches and How Do They Function on Dodge Sprinter 2500?

Service of the high pressure sensor/switch requires first disconnecting and isolating the negative battery cable, then taking out the air filter at the rear A/C evaporator housing and collecting the refrigerant from the rear refrigerant system. After that, take off the cover on the rear A/C condenser, unhook the wire harness from the rear A/C high pressure switch and remove the switch, plugging in a plug or sealing the discharge line fitting so no fluid drips out. It is important to add new PTFE thread sealing tape when you install a new switch, just like when you uninstall, to keep water from leaking. Take the tape or plug from the end of the rear discharge line, apply PTFE thread sealing tape to the new rear A/C high pressure switch, put it on the line fitting and tighten it with a torque of 10 N.m (88 in. lbs.). Reattach the wiring harness connector to the switch, connect the negative battery cable, remove the old refrigerant from the rear system, charge the air conditioner system and then put on the rear air filter and cover over the A/C condenser housing.

OEM Dodge Sprinter 2500 A/C Compressor Cut-Out Switches

HVAC Cut-Out Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 A/C Compressor Cut-Out Switches found

View related parts
Dodge Sprinter 2500 Pressure Switch Part Number: 68031513AA
$188.29 MSRP: $305.00
You Save: $116.71 (39%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch - A/C Pressure; Clutch Cycle; Compressor Cut-Out; System Valve Core; Trinary Switch.; Switch A/C Pressure
- Replaces: 5097873AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2002-2006 Dodge Sprinter 2500 | Base | 2.7L L5, 5 Cyl 2.7 L DIESEL
View related parts
Dodge Sprinter 2500 Pressure Switch Part Number: 68019266AB
Product Specifications
- Other Name: Switch - A/C Pressure; HVAC Pressure Switch; A/C Compressor Cut-Out; A/C System Valve Core; Trinary Switch.
- Replaces: 68019266AA, 68012649AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2009 Dodge Sprinter 2500 | Base | 3.0L V6, 3.5L V6, 6 Cyl 3.0 L DIESEL, 6 Cyl 3.5 L GAS

Dodge Sprinter 2500 A/C Compressor Cut-Out Switches

Choose OEM A/C Compressor Cut-Out Switches that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each A/C Compressor Cut-Out Switches follows strict manufacturing steps to lock in quality and fit. If your Dodge Sprinter 2500 matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Sprinter 2500 parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

These Dodge Sprinter 2500 A/C Compressor Cut-Out Switches are very popular due to their quality and performance their primary role is to control the operations of the Dodge Sprinter 2500. These A/C Compressor Cut-Out Switches are very essential in protecting the compressor because they constantly measure the pressure of the discharge and switches off the power supply when the pressure level is at its risky levels. This positive action not only boosts the durability of the A/C system but also avoid expensive repair on the Dodge Sprinter 2500 to remain relevant for diverse business uses. Affordable and easily installed on many models of the Dodge Sprinter 2500, these A/C Compressor Cut-Out Switches Readily increase efficiency and safety for every vehicle they're used on. The targeted vehicle model being the Dodge Sprinter 2500, these vehicles come in different forms, including van, chassis cab, and minibus, and the use of A/C Compressor Cut-Out Switches protects the Sprinter from severe damages. Moreover, these switches are designed in such a way that they can work for a long time without developing any problem when used he officially environments. As shields for compressor damage and boosters for a/c performance, these Dodge Sprinter 2500 A/C Compressor Cut-Out Switches are bright instances of innovation in the auto market with the touch of Dodge brand quality and precision. At the end, these switches are the meaningful illustration of safety and efficiency which speaks for the Dodge Sprinter 2500.

Dodge Sprinter 2500 A/C Compressor Cut-Out Switches Parts and Q&A

Pressure Switch
68031513AA
Q: What Are A/C Compressor Cut-Out Switches and How Do They Function on Dodge Sprinter 2500?
A:
Service of the high pressure sensor/switch requires first disconnecting and isolating the negative Battery Cable, then taking out the Air Filter at the rear A/C evaporator housing and collecting the refrigerant from the rear refrigerant system. After that, take off the cover on the rear A/C condenser, unhook the wire harness from the rear A/C high pressure switch and remove the switch, plugging in a plug or sealing the discharge line fitting so no fluid drips out. It is important to add new PTFE thread sealing tape when you install a new switch, just like when you uninstall, to keep water from leaking. Take the tape or plug from the end of the rear discharge line, apply PTFE thread sealing tape to the new rear A/C high pressure switch, put it on the line fitting and tighten it with a torque of 10 N.m (88 in. lbs.). Reattach the wiring harness connector to the switch, connect the negative battery cable, remove the old refrigerant from the rear system, charge the air conditioner system and then put on the rear air filter and cover over the A/C condenser housing.