How to Install a Blower Motor on Dodge Sprinter 2500?

Attach the wire harness connector (4) to the blower motor (1) first. Following this, pull the lower right corner of the cover (3) a bit backwards to open space for the blower motor and slide it gently into the HVAC casing (5). Remember to turn the motor clockwise until it is secure in the HVAC housing and you can feel the motor locks are fully engaged. Then, put the screw (2) that attaches the cover to the instrument panel and tighten it tightly. come after that, add the right side floor duct and the glove box, then reattach the negative wire on the battery.

How to Remove and Service a Blower Motor on Dodge Sprinter 2500?

As a first step, disconnect the negative battery cable and isolate it. Subsequently, unscrew the screws that attach the rear condenser cover to the top of the vehicle and lift the cover off. Subsequently, unfasten the nut and bolt that bind the rear A/C suction line to the rear condenser cover bracket, then loosen the four bolts attaching the cover bracket to the rear condenser bracket and lift off the bracket. Subsequently, unfasten the screws locking the rear evaporator cover and insulator to the vehicle's upper edge and remove both the cover and the insulator. Start by disconnecting the wire harness connectors from the rear blower motor and then remove the screws that fasten the rear blower motor to the rear evaporator housing; lastly, take out the blower motor itself.

OEM Dodge Sprinter 2500 Blower Motor

A/C Heater Blower Motor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Blower Motors found

View related parts
Dodge Sprinter 2500 Blower Motor, Front Part Number: 5133435AA
$225.42 MSRP: $346.00
You Save: $120.58 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Motor; HVAC Blower Motor, Front; Blower; Fan; HVAC Blower Motor
- Position: Front
- Replaces: 5133434AA, 5133435AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2006 Dodge Sprinter 2500 | Base | 5 Cyl 2.7 L DIESEL
View related parts
Dodge Sprinter 2500 Blower Motor, Rear Part Number: 5133460AA
Product Specifications
- Other Name: Motor - Blower; HVAC Blower Motor, Rear; Motor Blower
- Position: Rear
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2006 Dodge Sprinter 2500 | Base | 5 Cyl 2.7 L DIESEL
View related parts
Dodge Sprinter 2500 Blower Motor Part Number: 68012680AA
Product Specifications
- Other Name: Motor - Blower With Wheel; HVAC Blower Motor Assembly; Suction Fan, Cabin Air; Motor Blower With Wheel; HVAC Blower Motor
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2009 Dodge Sprinter 2500 | Base | 6 Cyl 3.0 L DIESEL, 6 Cyl 3.5 L GAS
View related parts
Dodge Sprinter 2500 Blower Motor, Rear Part Number: 5103806AA
Product Specifications
- Other Name: Motor; HVAC Blower Motor Assembly, Rear; HVAC Blower Motor, Rear; Blower Spirit; Blower; HVAC Blower Motor
- Position: Rear
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2009 Dodge Sprinter 2500 | Base | 5 Cyl 2.7 L DIESEL, 6 Cyl 3.0 L DIESEL, 6 Cyl 3.5 L GAS
View related parts
Dodge Sprinter 2500 Blower Motor, Rear Part Number: 68012631AA
Product Specifications
- Other Name: Blower With Wheel; HVAC Blower Motor Assembly, Rear; Motor Blower With Wheel
- Position: Rear
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2009 Dodge Sprinter 2500 | Base | 6 Cyl 3.0 L DIESEL, 6 Cyl 3.5 L GAS

Dodge Sprinter 2500 Blower Motor

Choose OEM Blower Motor that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Blower Motor follows strict manufacturing steps to lock in quality and fit. If your Dodge Sprinter 2500 matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Sprinter 2500 parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Blower Motor is a critical component of the Dodge Sprinter 2500 where it enhances the vehicle comfortable condition of the vehicle's inside. Being one of the brand's most trusted parts, the Blower Motor enables occupants to regulate the air circulation in the vehicle's cabin depending on the season or the weather condition. This Blower Motor comes with applications in different models of the Dodge Sprinter 2500 and it suits different configurations that may include vans, the chassis cabs, and minibuses. Its design allows it to be easily accessible and control, thus any problems with the electronic module and wiring mechanism can be effective solved, which in turn increase efficiency and safety. Blower Motor is a popular choice in the automotive market because of its durability and capacity to regulate the temperature inside the vehicle, which for long rides or commercial purposes is very important. Also, to improve climate control options, some models may contain several blower fans, regulatory for front and rear parts of the car. Because of its efficiency in fuel consumption and turning circle, The Blower Motor is indeed a proof that the brand is focused on performance as well as reliability thanks to Dodge and Mercedes-Benz's effort and therefore it is very essential for any driver who owns the Dodge Sprinter 2500.

Dodge Sprinter 2500 Blower Motor Parts and Q&A

Blower Motor
68012680AA
Q: How to Install a Blower Motor on Dodge Sprinter 2500?
A:
Attach the wire harness connector (4) to the blower motor (1) first. Following this, pull the lower right corner of the cover (3) a bit backwards to open space for the blower motor and slide it gently into the HVAC casing (5). Remember to turn the motor clockwise until it is secure in the HVAC housing and you can feel the motor locks are fully engaged. Then, put the screw (2) that attaches the cover to the instrument panel and tighten it tightly. come after that, add the right side floor duct and the Glove Box, then reattach the negative wire on the battery.
Blower Motor, Rear
5103806AA
Q: How to Remove and Service a Blower Motor on Dodge Sprinter 2500?
A:
As a first step, disconnect the negative Battery Cable and isolate it. Subsequently, unscrew the screws that attach the rear condenser cover to the top of the vehicle and lift the cover off. Subsequently, unfasten the nut and bolt that bind the rear A/C suction line to the rear condenser cover bracket, then loosen the four bolts attaching the cover bracket to the rear condenser bracket and lift off the bracket. Subsequently, unfasten the screws locking the rear evaporator cover and insulator to the vehicle's upper edge and remove both the cover and the insulator. Start by disconnecting the wire harness connectors from the rear blower motor and then remove the screws that fasten the rear blower motor to the rear evaporator housing; lastly, take out the blower motor itself.