How to Service and Repair Blower Control Switches for Front A/C Heater Systems on Dodge Sprinter 2500?

Before starting the blower motor switch service, first cut off the negative battery cable on vehicles with air bags and wait at least two minutes for the air bag capacitor to discharge. Remove the center bezel from the instrument panel at first, then remove the two screws that hold the A/C-heater control to the panel. Pull the A/C-heater control outwards from the panel to get to the rear and mark and disconnect the two control cables and both wiring harness connectors there. If changing the A/C-heater control, take the brackets off it. Remove the brackets from the A/C-heater control and attach them again. Once outside, uncover the linking wiring and the cable round guide and connect the connectors. Remember to link the control cable of the lower adjust lever to the front adjust wheel. Place the A/C-heater control inside the instrument panel and tighten its two retaining screws to 2 N.m (17 in. lbs.), then set the center bezel into place and connect the negative battery cable.

How to Remove and Install Blower Control Switches with Optional Rear A/C Units on Dodge Sprinter 2500?

Only when a car comes with a rear air conditioning system does the rear blower motor switch need the negative terminal of the battery to be removed first. Pull the blower motor switch out of the switch panel, then remove the wire harness connector from the switch. The next step for installation is to attach the wire harness to the rear blower motor switch, place the switch back in the panel and reconnect the battery negative cable.

OEM Dodge Sprinter 2500 Blower Control Switches

HVAC Control Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Blower Control Switches found

View related parts
Dodge Sprinter 2500 Dash Control Unit Part Number: 5103644AB
$616.59 MSRP: $938.00
You Save: $321.41 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Control - A/C And Heater; Climate Control Module
- Replaces: 5103644AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2002-2006 Dodge Sprinter 2500 | Base | 2.7L L5, 5 Cyl 2.7 L DIESEL
View related parts
Dodge Sprinter 2500 Blower Motor Switch, Rear Part Number: 5103853AA
$46.05 MSRP: $66.50
You Save: $20.45 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch - Rear Blower; Blower Control Switch; Switch; Switch Rear Blower
- Position: Rear
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2006 Dodge Sprinter 2500 | Base | 5 Cyl 2.7 L DIESEL
View related parts
Dodge Sprinter 2500 Heater Control Part Number: 5103643AB
Product Specifications
- Other Name: Control - A/C And Heater; HVAC Temperature Control Panel; Climate Control Module; Dash Control Unit
- Replaces: 5103643AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2002-2006 Dodge Sprinter 2500 | Base | 2.7L L5, 5 Cyl 2.7 L DIESEL

Dodge Sprinter 2500 Blower Control Switches

Choose OEM Blower Control Switches that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Blower Control Switches follows strict manufacturing steps to lock in quality and fit. If your Dodge Sprinter 2500 matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Sprinter 2500 parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

From the context held above, it can be deduced that the Dodge Sprinter 2500 Blower Control Switches are critical parts that are used to improve the functionality and durability of the heating and air conditioning systems of the particular model of the automobile. These Blower Control Switches control the speed of fan in order to deliver smooth and regulated air blow and temperature in the cabin zone which is very much important for the drivers and passengers. The Dodge Sprinter 2500 Blower Control Switches which are very durable offer good and stable performance across different models of Sprinter, and for this reason, users have more confidence in it. Feasibility in use with various Sprinter 2500 models such as the 4-door van, the crew van, and the minibus, also provides credibility and reveals customers' desire for them. The Dodge Sprinter 2500 boasts of its structural design and the Blower Control Switches leaves a lot of impact to the functionality of the vehicle by improving its Climate Control function. It is however most suitable for use in commercial undertakings where the comfort of customers can determine their productivity. Furthermore, the Dodge sprinter 2500 blower control switches are made durable to provide reliability at your working environment. This notion is also supported by the next aspect of reliability and the quality of the workmanship which is related to the Dodge. All in all, it can be stated that Dodge Sprinter 2500 Blower Control Switches are both functional and significant components that provide the drivers with the enhanced experience while on the road, therefore being the great asset of the Dodge Sprinter 2500.

Dodge Sprinter 2500 Blower Control Switches Parts and Q&A

Heater Control
5103643AB
Q: How to Service and Repair Blower Control Switches for Front A/C Heater Systems on Dodge Sprinter 2500?
A:
Before starting the blower motor switch service, first cut off the negative Battery Cable on vehicles with air bags and wait at least two minutes for the air bag capacitor to discharge. Remove the center bezel from the instrument panel at first, then remove the two screws that hold the A/C-heater control to the panel. Pull the A/C-heater control outwards from the panel to get to the rear and mark and disconnect the two control cables and both wiring harness connectors there. If changing the A/C-heater control, take the brackets off it. Remove the brackets from the A/C-heater control and attach them again. Once outside, uncover the linking wiring and the cable round guide and connect the connectors. Remember to link the control cable of the lower adjust lever to the front adjust wheel. Place the A/C-heater control inside the instrument panel and tighten its two retaining screws to 2 N.m (17 in. lbs.), then set the center bezel into place and connect the negative battery cable.
Dash Control Unit
5103644AB
Q: How to Remove and Install Blower Control Switches with Optional Rear A/C Units on Dodge Sprinter 2500?
A:
Only when a car comes with a rear air conditioning system does the rear blower motor switch need the negative terminal of the battery to be removed first. Pull the blower motor switch out of the switch panel, then remove the wire harness connector from the switch. The next step for installation is to attach the wire harness to the rear blower motor switch, place the switch back in the panel and reconnect the battery negative cable.