OEM Dodge Sprinter 3500 Cruise Control Switch

Dodge Sprinter 3500 Cruise Control Switch Parts and Q&A

• Cruise Switch
  5103744AA
  Q: How to Service a Cruise Control Switch on Dodge Sprinter 3500?

  A:

  The first step for cruise control switch service is to disconnect the negative Battery Cable. Remove the multi-function switch and you'll find that the speed control switch is mounted to its backside. Next, remove the screw holding the switch to its mount, disconnect the speed control switch from the multi-function switch and take out the pigtail electrical connector from the instrument panel connection. To mount the speed control switch, attach it to the back of the multi-function switch using the screw and stick to the torque regulations. Attach the multi-function switch to where it belongs and reattach the pigtail electrical connector to the wiring harness, making certain the wires are not getting pinched. Lastly, secure the battery's negative cable to its terminal.
• Cruise Switch
  68010454AA
  Q: How to Install the Cruise Control Switch on Dodge Sprinter 3500?

  A:

  Place the speed control switch into position, then set the switch mounting screw to the right torque. Next, attach the pigtail electrical connector to the instrument panel wiring harness, so the wires won't be pinched. Installing the Clock Spring is explained in the Restraint Systems/Air Bag Systems/Clock Spring Assembly / Spiral Cable/Service and Repair section. In the end, secure the negative Battery Cable back to the battery.