How to Service and Repair a Thermostat Housing on Dodge Dakota?

Begin the thermostat housing service and repair by draining part of the coolant from the radiator into a container, making sure you do not discard unused coolant. For constant tension hose clamps use the special clamp tool (number 6094) and the Snap-On clamp tool (number HPC-20) when the clamps are large and ensure you are wearing safety glasses. When you must use a new constant tension clamp, be sure it is identical to the one that was used before and has the same letter or number that originally appeared on it. If your vehicle lacks air conditioning, get rid of both bypass hose clamps, set the hose in the center and free the hose. When the vehicle has air conditioning, separate the negative terminal from the battery, partially drain the cooling system, unclip the upper radiator hose clamp, remove the hose plus wiring connector from the A/C compressor, take off the air cleaner assembly and lastly remove the accessory drive belt. One of the A/C compressor/generator bracket mounting bolts can only be accessed after the drive belt idler pulley is removed. Once you take out the oil dipstick tube mounting bolt, unhook the throttle body cables, remove the hose clamp and hose and then remove the heater hose coolant return tube, discarding its old O-ring. After that, get rid of the bypass hose support plate using the highlighted hex wrench, take out the bracket-to-intake manifold bolts and six bracket bolts and lift the generator and A/C compressor assembly up to expose the bypass hose-use a block of wood to keep the supported assembly off the ground. Place and adjust both clamps over the center area of the bypass hose and then remove it. For installation, put the bypass hose clamps at the hose's center point, install the bypass hose onto the engine and secure both the clamps. Refill the cooling system, start the engine and see if it is leaking. Once you have installed the bypass hose on a vehicle with air conditioning, add the generator-A/C mounting bracket assembly in position and tighten bolts (number 1 and 2) to 54 Nm (40 ft. lbs.); tighten the third bolt to 40 Nm (30 ft. lbs.). Put on a different O-ring to the heater hose coolant return tube, coat it with antifreeze and then attach the tube and its securing bolt to the engine. Rearrange the control wiring for the throttle body, set the oil dipstick mounting bolt and the idler pulley and tighten both fasteners to 54 Nm (40 ft. lbs.). Hold on to the drive belt while you insert it so it doesn't slip, then add the air cleaner assembly, connect the top radiator hose to the radiator, plug the wiring into the A/C compressor and finally reconnect the battery negative wire. After that, complete filling the coolant, ignite the engine, let it warm up and check for flow leaks.

How to Service a 2.4L Engine's Thermostat Housing on Dodge Stratus?

Before servicing the thermostat housing on a 2.4L engine, drain some of the cooling liquid so it's below the level of the housing. Uninstall the thermostat, go on to cut off the coolant sensor connector from the engine and then remove the heater hose from its supply. Remove the housing attaching bolts and take the housing out with the surrounding gasket. Gasket and housing should be lined up perfectly clean and fasten the bolts until you reach 28 Nm or 20 ft. lbs. Secure the heater's supply hose and the connector to the engine coolant temperature sensor, install the thermostat and fill up the coolant in the system.

OEM Dodge Thermostat Housing

Engine Coolant Thermostat Housing

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

48 Thermostat Housings found

View related parts
Dodge Thermostat Housing Part Number: 5047861AD
$75.37 MSRP: $113.00
You Save: $37.63 (34%)
ADD TO CART
Product Specifications
- Other Name: Engine Coolant Thermostat Housing Kit; Thermostat and Housing Assembly; Cover.; Thermostat Unit; Housing Thermostat Includes Thermostat, Sensor, And Seal; Housing Thermostat Include'S Thermostat
- Replaces: 5047861AB, 5047861AA, 5047861AC, 5047263AB, 5047263AC, 5047772AB
Fits the following Dodge Models:
- Dart | 2012-2016 | GT, Limited, R/T, Rallye, SE, SXT, SXT Sport | 2.0L L4, 2.4L L4, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Dodge Thermostat Housing Part Number: 68273161AA
$60.93 MSRP: $91.10
You Save: $30.17 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Thermostat; Engine Coolant Thermostat; Thermostat Housing Cover; Thermostat, Coolant
- Replaces: 4666140AA
Fits the following Dodge Models:
- Avenger | 2007-2010 | R/T | 3.5L V6, 6 Cyl 3.5 L GAS
- Caravan | 2007 | 3.3L V6
- Grand Caravan | 2007-2010 | C/V, SE, SXT | 3.3L V6, 3.8L V6, 4.0L V6, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS
- Journey | 2009-2010 | Crew, R/T, SXT | 3.5L V6, 6 Cyl 3.5 L GAS
- Nitro | 2007-2011 | Detonator, Heat, R/T, SXT, Shock | 4.0L V6, 6 Cyl 4.0 L GAS
View More
View related parts
Dodge Thermostat Housing Part Number: 4781387AA
$105.39 MSRP: $158.00
You Save: $52.61 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Nipple - Thermostat; Engine Coolant Thermostat Housing; Thermostat Housing Cover; Housing Thermostat
- Replaced by: 4781387AB
Fits the following Dodge Models:
- Caravan | 2001-2007 | Base, C/V, SE, SXT, Sport | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS
- Grand Caravan | 2001-2007 | Anniversary Edition, Base, C/V, EL, ES, EX, SE, SE Plus, SXT, Sport | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
View related parts
Dodge Thermostat Housing Part Number: 68145495AA
$199.41 MSRP: $295.00
You Save: $95.59 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Housing - Thermostat; Engine Coolant Thermostat Housing; Thermostat Housing Cover; Housing Thermostat
- Replaces: 68005456AA
Fits the following Dodge Models:
- Ram 2500 | 2007-2010 | Laramie, SLT, ST, SXT, TRX | 6 Cyl 6.7 L DIESEL, 6.7L L6
- Ram 3500 | 2007-2010 | Laramie, SLT, ST, SXT, Sport | 6 Cyl 6.7 L DIESEL, 6.7L L6
- Ram 4500 | 2008-2010 | 6.7L L6
- Ram 5500 | 2008-2010 | 6.7L L6
View More
View related parts
Dodge Thermostat Housing Part Number: 4892642AD
$64.18 MSRP: $94.50
You Save: $30.32 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Thermostat; Housing Gasket; Housing Thermostat
- Replaces: 4892642AB, 4892642AC, 4892642AA
Fits the following Dodge Models:
- Dart | 2012-2016 | Aero, GT, Limited, Rallye, SE, SXT, SXT Sport | 1.4L L4, 4 Cyl 1.4 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Dodge Thermostat Housing Part Number: 4792361
$62.20 MSRP: $78.85
You Save: $16.65 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Housing - Thermostat; Engine Coolant Thermostat Housing Cover; Water Inlet; Housing Thermostat
Fits the following Dodge Models:
- Intrepid | 1998-2004 | ES, Police, R/T, SE, SXT | 6 Cyl 3.2 L GAS, 6 Cyl 3.5 L GAS
View related parts
Dodge Thermostat Housing Part Number: MD365878
$51.09 MSRP: $64.76
You Save: $13.67 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Housing - Thermostat; Engine Coolant Outlet Flange; Thermostat Housing Cover; Water Outlet; Housing Thermostat
Fits the following Dodge Models:
- Stratus | 2001-2005 | SE, SXT | 4 Cyl 2.4 L GAS
View related parts
Dodge Housing - Thermostat Part Number: 5184570AK
$64.89 MSRP: $97.60
You Save: $32.71 (34%)
ADD TO CART
Product Specifications
- Other Name: HOUSING-THERMOSTAT
Fits the following Dodge Models:
- Avenger | 2011-2014 | Express, Heat, Lux, Mainstreet, R/T, SE, SXT, SXT Plus | 3.6L V6, 6 Cyl 3.6 L FLEX
- Grand Caravan | 2011-2020 | American Value Package, C/V, Crew, Express, GT, Mainstreet, R/T, SE, SE 30th Anniversary Edition, SE Plus, SXT, SXT 30th Anniversary Edition | 3.6L V6, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
- Journey | 2011-2019 | Crew, Crossroad, GT, Limited, Lux, Mainstreet, R/T, SE, SXT | 3.6L V6, 6 Cyl 3.6 L FLEX
View More
View related parts
Dodge ADAPTER-COOLANT Part Number: 68003582AC
$176.17 MSRP: $264.00
You Save: $87.83 (34%)
Ships in 1-2 Business Days
ADD TO CART
Fits the following Dodge Models:
- Avenger | 2008-2014 | Express, Lux, Mainstreet, R/T, SE, SXT | 2.4L L4, 4 Cyl 2.4 L GAS
- Caliber | 2008-2012 | Express, Heat, Mainstreet, R/T, Rush, SE, SXT, SXT Plus, Uptown | 1.8L L4, 2.0L L4, 2.4L L4, 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
- Journey | 2009-2020 | AVP, Base, Crossroad, Express, SE, SE Value, SXT | 2.4L L4, 4 Cyl 2.4 L GAS
View More
View related parts
Dodge Thermostat Housing Part Number: 53022168AD
$48.99 MSRP: $73.00
You Save: $24.01 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Housing - Thermostat; Engine Coolant Thermostat Housing; Thermostat Housing Cover; Housing Thermostat
- Replaces: 53022168AB, 53022168AC, 53022168AA
Fits the following Dodge Models:
- Challenger | 2011-2016 | 392 Hemi Scat Pack Shaker, R/T Scat Pack, SRT 392, SRT8, Scat Pack | 6.4L V8, 8 Cyl 6.4 L GAS
- Charger | 2006-2023 | Daytona, Pursuit, R/T, R/T Road & Track, SE, SRT8 | 5.7L V8, 6.4L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS, 8 Cyl 6.4 L GAS
- Magnum | 2006-2008 | 5.7L V8
View More
View related parts
Dodge Housing - Thermostat Part Number: 68676479AA
$18.78 MSRP: $27.60
You Save: $8.82 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: HOUSING-THERMOSTAT
Fits the following Dodge Models:
- Avenger | 2007-2014 | Express, Lux, Mainstreet, R/T, SE, SXT | 2.4L L4, 4 Cyl 2.4 L GAS
- Caliber | 2007-2012 | Express, Heat, Mainstreet, R/T, Rush, SE, SXT, SXT Plus, Uptown | 1.8L L4, 2.0L L4, 2.4L L4, 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
- Journey | 2009-2020 | AVP, Base, Crossroad, Express, SE, SE Value, SXT | 2.4L L4, 4 Cyl 2.4 L GAS
View More
View related parts
Dodge Thermostat Housing Part Number: 68185117AC
$127.11 MSRP: $192.00
You Save: $64.89 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Housing - Thermostat; Engine Coolant Thermostat Housing; Thermostat Housing Cover; Housing Thermostat
- Replaces: 68185117AB
Fits the following Dodge Models:
- Challenger | 2015-2023 | SRT Demon, SRT Demon 170, SRT Hellcat, SRT Hellcat Jailbreak, SRT Hellcat Redeye, SRT Hellcat Redeye Jailbreak, SRT Hellcat Redeye Widebody, SRT Hellcat Redeye Widebody Jailbreak, SRT Hellcat Widebody, SRT Hellcat Widebody Jailbreak, SRT Jailbreak, SRT Super Stock | 6.2L V8, 8 Cyl 6.2 L GAS
- Charger | 2015-2023 | SRT Hellcat, SRT Hellcat Redeye Widebody, SRT Hellcat Redeye Widebody Jailbreak, SRT Hellcat Widebody, SRT Hellcat Widebody Jailbreak, SRT Jailbreak | 6.2L V8, 8 Cyl 6.2 L GAS
View related parts
Dodge Thermostat Housing Part Number: 4792923AA
$59.04 MSRP: $88.65
You Save: $29.61 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Housing - Thermostat; Engine Coolant Thermostat Housing Cover; Thermostat Housing Cover
Fits the following Dodge Models:
- Magnum | 2005 | SXT, SXT Special Edition | 6 Cyl 3.5 L GAS
View related parts
Dodge Thermostat Cover Part Number: 4792328
$33.47 MSRP: $42.43
You Save: $8.96 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Housing - Thermostat; Engine Coolant Thermostat Housing; Engine Coolant Thermostat Housing Cover; Water Inlet; Housing Thermostat; Thermostat Housing
Fits the following Dodge Models:
- Intrepid | 1998-2004 | Base, ES, SE | 6 Cyl 2.7 L GAS
View related parts
Dodge Thermostat Housing Part Number: 4792612AB
$39.47 MSRP: $85.20
You Save: $45.73 (54%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Housing - Thermostat; Engine Coolant Thermostat Housing Cover
- Replaces: 4792612AA
Fits the following Dodge Models:
- Stratus | 2001-2006 | ES, R/T, SE, SE Plus, SXT | 2.7L V6, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS
View related parts
Dodge Thermostat Housing Part Number: 4781387AB
$105.39 MSRP: $158.00
You Save: $52.61 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Nipple - Thermostat
- Replaces: 4781387AA
Fits the following Dodge Models:
- Caravan | 2001-2007 | Base, C/V, SE, SXT, Sport | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS
- Grand Caravan | 2001-2007 | Anniversary Edition, Base, C/V, EL, ES, EX, SE, SE Plus, SXT, Sport | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
View related parts
Dodge Thermostat Housing Part Number: MD377072
$84.88 MSRP: $107.60
You Save: $22.72 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Housing - Thermostat; Housing Thermostat
Fits the following Dodge Models:
- Stratus | 2001-2005 | R/T, SE | 6 Cyl 3.0 L GAS
View related parts
Dodge Thermostat Housing Part Number: 5192057AD
$27.80 MSRP: $31.90
You Save: $4.10 (13%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Housing - Thermostat; Engine Coolant Thermostat Housing; Thermostat Housing Cover; Housing Thermostat
Fits the following Dodge Models:
- Durango | 2009 | Limited Hybrid | 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV)
- Ram 1500 | 2009-2010 | SLT, ST, TRX, TRX4 | 8 Cyl 4.7 L FLEX
View related parts
Dodge Thermostat Housing Part Number: 68148113AA
$61.41 MSRP: $90.70
You Save: $29.29 (33%)
Product Specifications
- Other Name: Housing - Water Inlet; Thermostat Housing Cover; Water Inlet
- Replaces: 4892312AC, 4892312AB
Fits the following Dodge Models:
- Challenger | 2009-2010 | SE | 6 Cyl 3.5 L GAS
- Charger | 2007-2010 | Base, Pursuit, SE, SXT | 3.5L V6, 6 Cyl 3.5 L GAS
- Magnum | 2007-2008 | SE, SXT | 3.5L V6, 6 Cyl 3.5 L GAS
View More
View related parts
Dodge Thermostat Housing Part Number: 53006047
Product Specifications
- Other Name: Housing - Thermostat; Thermostat Housing Cover; Housing, Thermostat; Housing Thermostat
Fits the following Dodge Models:
- Ram 2500 | 1999 | Base | 10 Cyl 8.0 L GAS
- Ram 3500 | 1994-1999 | Base | 10 Cyl 8.0 L GAS

| Page 1 of 3 |Next >

1-20 of 48 Results

Dodge Thermostat Housing

OEM parts sourced directly from Dodge deliver superior quality, long lasting strength, and a precise fit you can trust. Each item goes through strict quality checks to ensure safety, toughness, and performance that matches your factory equipment. At JeepPartsDeal online shop, you'll get top-quality, budget-friendly OEM Dodge Thermostat Housing for your vehicle. We focus on giving you a high standard without pushing up the price. Our full selection of genuine factory products comes backed by the original manufacturer's warranty. You'll love our fast delivery, seamless shopping experience, and convenient return policy, saving you all the hassle.

Dodge Thermostat Housing maintains engine heat in check to ensure power is sustained even in the long run. Dodge began in a crass machine shop and soon became known as having indestructible steel bodies. Dodge went to the extremes of propelling crude power with the HEMI engines plunked into street cars that resembled missiles on the track. Dodge also held throttle on with experiments of Viper that have proven that aggression can exist in showroom models. Dodge has just introduced artificial thunder piped by its Fratzonic Chambered Exhaust, and electric drivers can select roar or hush at will. Drivers have the choice of either Drag, Donut, Sport, or quiet Stealth making commutes a personalized stunt. That impatient spirit is in every badge that the company embosses, and it is more of bad blood than good manners. Thermostat Housing is at the crossroads of the coolant pathway, and it houses the thermostat and directs its flow so that liquid only reaches the block when it is time to cool it down. A broken or bent Thermostat Housing leaks pressure and spikes temperature, and hence this cast alloy piece combats corrosion and bend. The ECU remains alive with air-fuel ratios close to target and horsepower stable with the sensors that match the Thermostat Housing to provide the ECU with stable data. Fits a new Thermostat Housing, and the gauge no longer creeps, fans run less, and the engine retains its punch even on hot days.

Dodge Thermostat Housing Parts and Q&A

Thermostat Housing
53006192
Q: How to Service and Repair a Thermostat Housing on Dodge Dakota?
A:
Begin the thermostat housing service and repair by draining part of the coolant from the radiator into a container, making sure you do not discard unused coolant. For constant tension hose clamps use the special clamp tool (number 6094) and the Snap-On clamp tool (number HPC-20) when the clamps are large and ensure you are wearing safety glasses. When you must use a new constant tension clamp, be sure it is identical to the one that was used before and has the same letter or number that originally appeared on it. If your vehicle lacks air conditioning, get rid of both bypass hose clamps, set the hose in the center and free the hose. When the vehicle has air conditioning, separate the negative terminal from the battery, partially drain the cooling system, unclip the upper radiator hose clamp, remove the hose plus wiring connector from the A/C compressor, take off the air cleaner assembly and lastly remove the accessory drive belt. One of the A/C compressor/generator bracket mounting bolts can only be accessed after the drive belt idler pulley is removed. Once you take out the oil dipstick tube mounting bolt, unhook the throttle body cables, remove the hose clamp and hose and then remove the heater hose coolant return tube, discarding its old O-ring. After that, get rid of the bypass hose support plate using the highlighted hex wrench, take out the bracket-to-intake manifold bolts and six bracket bolts and lift the generator and A/C compressor assembly up to expose the bypass hose-use a block of wood to keep the supported assembly off the ground. Place and adjust both clamps over the center area of the bypass hose and then remove it. For installation, put the bypass hose clamps at the hose's center point, install the bypass hose onto the engine and secure both the clamps. Refill the cooling system, start the engine and see if it is leaking. Once you have installed the bypass hose on a vehicle with air conditioning, add the generator-A/C mounting bracket assembly in position and tighten bolts (number 1 and 2) to 54 Nm (40 ft. lbs.); tighten the third bolt to 40 Nm (30 ft. lbs.). Put on a different O-ring to the heater hose coolant return tube, coat it with antifreeze and then attach the tube and its securing bolt to the engine. Rearrange the control wiring for the throttle body, set the oil dipstick mounting bolt and the idler pulley and tighten both fasteners to 54 Nm (40 ft. lbs.). Hold on to the drive belt while you insert it so it doesn't slip, then add the air cleaner assembly, connect the top radiator hose to the radiator, plug the wiring into the A/C compressor and finally reconnect the battery negative wire. After that, complete filling the coolant, ignite the engine, let it warm up and check for flow leaks.
Thermostat Housing
4792490AA
Q: How to Service a 2.4L Engine's Thermostat Housing on Dodge Stratus?
A:
Before servicing the thermostat housing on a 2.4L engine, drain some of the cooling liquid so it's below the level of the housing. Uninstall the thermostat, go on to cut off the coolant sensor connector from the engine and then remove the heater hose from its supply. Remove the housing attaching bolts and take the housing out with the surrounding gasket. Gasket and housing should be lined up perfectly clean and fasten the bolts until you reach 28 Nm or 20 ft. lbs. Secure the heater's supply hose and the connector to the engine coolant temperature sensor, install the thermostat and fill up the coolant in the system.