What steps should be followed to remove and install a transfer case on Dodge Dakota?

When starting this procedure, engage the transfer case in 2WO or AWD if it is not already engaged. Firstly, unplug the car battery cable from negatively charged terminal. Lift the car and set it on stands; then remove the skid plate if installed. Remove all the lubricant from the transfer case and unbolt all vacuum/vent hose connections and electrical connections of the transfer case. Removal of the transfer case shift motor and sensor connectors, and the front and rear driveshafts. In some of the models it is perhaps required to remove the rear crossmember of the concerned car. Place transmission jack under the transmission and transfer case passing the safety chain around the transfer case. Located at the transfer case-to-transmission bolts/nuts and provide all necessary wires and hoses disconnected, than take the transfer case and its jack towards backward but must maintain a level position to the vehicle. After the input shaft is clear again it is now safe to lower the transfer case and take it off under the vehicle. For installation of the gasket, aluminium gasket material must be entirely stripped from the rear of the transmission, new RTV sealant must be applied only to both sides of the gasket and this gasket put ideally on the mating surface. Once the transfer case is clamped to the jack raise it to the right height and place it in such a manner that the input shaft makes contact with the output shaft of the transmission, and aligning as required. Replace and torque the transfer case-to-transmission bolts/nuts, remove the safety chains and also take off the jack supporting the transfer case. If removed, first install the rear crossmember and then, using the transmission jack, have it removed. Reconnect all vacuum and vent lines and install as necessary and reconnect all electrical connectors. Join the shift motor and sensor electrical connectors of the transfer case, add transfer case lubricant if required, and inspect the transmission lubricant level if present. If the vehicle is equipped with skid plate, then install it and after that take out the jackstands; put down the vehicle; connect the negative terminal of the battery and perform a road test to check whether it works properly and if there is any leakage or not.

OEM Dodge Transfer Case

Speed Transfer Case

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

69 Transfer Cases found

View related parts
Dodge Transfer Case Part Number: 52853662AC
$2279.27 MSRP: $4855.00
You Save: $2575.73 (54%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Case
- Replaces: 52853662AB
Fits the following Dodge Models:
- Durango | 2011-2013 | Citadel, Crew, Express, Heat, SXT, Special Service | 6 Cyl 3.6 L FLEX
View related parts
Dodge Transfer Case Part Number: 68440306AB
$1051.31 MSRP: $1515.00
You Save: $463.69 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Power Take - Off Unit
- Replaces: 68440306AA
Fits the following Dodge Models:
- Hornet | 2023-2025 | GT, GT Plus, R/T, R/T Plus | 4 Cyl 1.3 L PLUG-IN HYBRID EV-GAS (PHEV), 4 Cyl 2.0 L GAS
View related parts
Dodge Transfer Case Part Number: 68498857AA
$1463.03 MSRP: $2175.00
You Save: $711.97 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Case
- Replaced by: 68498857AB
Fits the following Dodge Models:
- Durango | 2021-2025 | Citadel, Pursuit, R/T, R/T Hemi Orange, R/T Plus, R/T Premium, Special Service | 8 Cyl 5.7 L GAS
View related parts
Dodge Transfer Part Number: 5038878AC
$1803.38 MSRP: $2625.00
You Save: $821.62 (32%)
ADD TO CART
Fits the following Dodge Models:
- Durango | 2023-2025, 2021 | Citadel, GT, GT Plus, GT Premium, Pursuit, R/T, R/T Hemi Orange, R/T Plus, R/T Premium, SRT 392, SRT 392 Plus, SRT 392 Premium, SRT Hellcat, SRT Hellcat Plus, SRT Hellcat Premium, SXT, SXT Plus, Special Service | 3.6L V6, 5.7L V8, 6.2L V8, 6.4L V8, 8 Cyl 6.2 L GAS
View related parts
Dodge Transfer Case Part Number: 4593847AD
$1855.85 MSRP: $2805.00
You Save: $949.15 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Case
- Replaces: 4593847AC, 4593847AB, RL593847AC, RL593847AD
Fits the following Dodge Models:
- Charger | 2009-2014 | Pursuit, R/T, SE | 5.7L V8, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS
View related parts
Dodge Transfer Case Part Number: RL105473AH
$2237.53 MSRP: $3175.00
You Save: $937.47 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Transfer Case - Nv244
- Replaces: 52105473AG, 52105473AH
Fits the following Dodge Models:
- Dakota | 2003-2004 | Base, R/T, SLT, SLT Plus, SXT, Sport, Sport Plus | 3.7L V6, 4.7L V8, 6 Cyl 3.7 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.9 L GAS
View related parts
Dodge Transfer Case Part Number: RL105897AE
$1813.88 MSRP: $3459.00
You Save: $1645.12 (48%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Transfer Case - Nv244
- Replaces: 52105897AC, 52105897AE, 52105897AD
Fits the following Dodge Models:
- Durango | 2004 | Limited, SLT, ST | 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
Dodge Transfer Case Part Number: RL853556AA
$1634.85 MSRP: $2455.00
You Save: $820.15 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Case - Nvg143
- Replaces: 52853556AA
Fits the following Dodge Models:
- Nitro | 2007-2011 | Detonator, Heat, R/T, SXT, Shock | 4.0L V6, 6 Cyl 4.0 L GAS
View related parts
Dodge Transfer Case Part Number: R2123222AC
$1844.25 MSRP: $2210.00
You Save: $365.75 (17%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Replaces: R2123222AA, R2123222AB
Fits the following Dodge Models:
- Dakota | 2008-2010 | Big Horn, Laramie, Lone Star, SLT, SXT, Sport, TRX, TRX4 | 3.7L V6, 4.7L V8, 8 Cyl 4.7 L FLEX
View related parts
Dodge Transfer Case Part Number: R2853308AE
$2004.48 MSRP: $2400.00
You Save: $395.52 (17%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Replaces: RL853308AB, R2853308AB, 52853308AB, 52853308AA, R2853308AC, R2853308AD
Fits the following Dodge Models:
- Dakota | 2007-2008 | 3.7L V6, 4.7L V8
- Durango | 2005-2009 | Adventurer, Limited, SE, SLT, ST, SXT | 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
Dodge Transfer Case Part Number: RL853729AA
$1364.13 MSRP: $1640.00
You Save: $275.87 (17%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Case - Nvg143
- Replaces: 52853729AA
Fits the following Dodge Models:
- Nitro | 2008-2011 | Heat, SE, SXT | 3.7L V6, 6 Cyl 3.7 L GAS
View related parts
Dodge Transfer Case Part Number: RL123108AB
$2176.85 MSRP: $2460.00
You Save: $283.15 (12%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Case - Nv243
- Replaces: 52123108AB
Fits the following Dodge Models:
- Dakota | 2007-2010 | Big Horn, Laramie, Lone Star, SLT, ST, SXT, Sport, TRX, TRX4 | 3.7L V6, 6 Cyl 3.7 L GAS
View related parts
Dodge Transfer Case Part Number: 52105026AB
Product Specifications
- Other Name: Transfer Case - Np241 Head; Transfer Case Np241 Head
Fits the following Dodge Models:
- Ram 1500 | 1998-2000 | Laramie, SS/T 5.9L, ST, Sport, WS | 6 Cyl 3.9 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
- Ram 2500 | 1998-2000 | Base | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 8 Cyl 5.9 L GAS
- Ram 3500 | 1998-2000 | Base | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 8 Cyl 5.9 L GAS
View More
View related parts
Dodge Transfer Case Part Number: 5018988AA
Product Specifications
- Other Name: Transmission
Fits the following Dodge Models:
- Caravan | 1993-2000 | Base, C/V, ES, LE, SE, Sport | 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L CNG, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
- Grand Caravan | 1993-2000 | Base, ES, LE, SE, Sport | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
View related parts
Dodge Transfer Case Part Number: R2853060AF
Product Specifications
- Replaces: 52853060AC, 52853060AE, 52853060AD, R2853060AE, RL853060AE
Fits the following Dodge Models:
- Ram 2500 | 2004-2010 | Laramie, Power Wagon, SLT, ST, SXT, Sport, TRX, TRX4 | 5.7L V8, 5.9L L6, 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL, 6.7L L6, 8 Cyl 5.7 L GAS
- Ram 3500 | 2004-2009 | Laramie, SLT, ST, SXT, Sport, TRX4 | 5.7L V8, 5.9L L6, 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL, 6.7L L6, 8 Cyl 5.7 L GAS
View related parts
Dodge Transfer Case Part Number: 52123577AA
$1561.98 MSRP: $2280.00
You Save: $718.02 (32%)
Product Specifications
- Other Name: Case
- Replaces: RL123577AA
Fits the following Dodge Models:
- Charger | 2012-2014 | Pursuit, SE, SXT, SXT Plus | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Dodge Case Part Number: 68370968AC
$1362.55 MSRP: $1985.00
You Save: $622.45 (32%)
Fits the following Dodge Models:
- Durango | 2011-2025 | Citadel, Crew, GT, GT Plus, GT Premium, Limited, Pursuit, R/T, R/T Hemi Orange, R/T Plus, R/T Premium, SRT 392, SRT 392 Plus, SRT 392 Premium, SRT Hellcat, SRT Hellcat Plus, SRT Hellcat Premium, SXT, SXT Plus, Special Service | 3.6L V6, 5.7L V8, 6.2L V8, 6.4L V8, 8 Cyl 5.7 L GAS
View related parts
Dodge Case Part Number: 5038879AC
$2585.80 MSRP: $3760.00
You Save: $1174.20 (32%)
Fits the following Dodge Models:
- Durango | 2018-2025 | Citadel, GT, GT Plus, GT Premium, Pursuit, R/T, R/T Hemi Orange, R/T Plus, R/T Premium, SRT, SRT 392, SRT 392 Plus, SRT 392 Premium, SRT Hellcat, SRT Hellcat Plus, SRT Hellcat Premium, SXT, SXT Plus, Special Service | 3.6L V6, 5.7L V8, 6.2L V8, 6.4L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.4 L GAS
View related parts
Dodge Transfer Case Part Number: RL001953AI
$2948.00 MSRP: $3415.00
You Save: $467.00 (14%)
Product Specifications
- Other Name: Case Kit
- Replaces: 68001953AI
Fits the following Dodge Models:
- Charger | 2007-2008 | 3.5L V6, 5.7L V8
- Magnum | 2007-2008 | R/T, SE, SRT8, SXT | 3.5L V6, 5.7L V8, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
Dodge Transfer Case Part Number: 52105332AF
Fits the following Dodge Models:
- Durango | 1998-1999 | Base, SLT, SLT Plus | 6 Cyl 3.9 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS

| Page 1 of 4 |Next >

1-20 of 69 Results

Dodge Transfer Case

OEM parts sourced directly from Dodge deliver superior quality, long lasting strength, and a precise fit you can trust. Each item goes through strict quality checks to ensure safety, toughness, and performance that matches your factory equipment. At JeepPartsDeal online shop, you'll get top-quality, budget-friendly OEM Dodge Transfer Case for your vehicle. We focus on giving you a high standard without pushing up the price. Our full selection of genuine factory products comes backed by the original manufacturer's warranty. You'll love our fast delivery, seamless shopping experience, and convenient return policy, saving you all the hassle.

Dodge Transfer Case transfers the torque forward and back to ensure that all wheels draw weight during fire. Dodge expanded out of a ruddy machine shop into a badge that was full of steel bodies and muscle swagger, one that never hesitated to flout raw power and daring styles, and it earned the trust of its supporters not by sweetening the truth of speed. Dodge continued to drive with HEMI lumps that strike hard so that ordinary drivers can feel that they have robbed the circuit off the floor of the showroom. Then Dodge set the streets ablaze with Viper insanity and recently the Fratzonic scream that makes even the silent electrons thunder to any person with a pulse. Dodge has drive modes, which go between stealth and stunt during the working day commutes since attitude is everything as far as horsepower is concerned. Transfer Case is placed between the axles and the transmission where engine muscle moves to each end instantly to provide traction in snow, mud, or clean pavement. Transfer Case allows the driver to switch between two and four wheel drive using a dash switch, allowing the truck to be controlled without crawling under it. In full-time configurations, Transfer Case is supplied with a center differential and a viscous coupler to stabilize the spin, therefore corners remain smooth and gears remain safe. Transfer Case needs to be taken into consideration as far as chains and gears are concerned since long hours of hard usage can cause metal to stretch and take away that sharp division of power.

Dodge Transfer Case Parts and Q&A

Transfer Case
RL123108AB
Q: What steps should be followed to remove and install a transfer case on Dodge Dakota?
A:
When starting this procedure, engage the transfer case in 2WO or AWD if it is not already engaged. Firstly, unplug the car battery cable from negatively charged terminal. Lift the car and set it on stands; then remove the skid plate if installed. Remove all the lubricant from the transfer case and unbolt all vacuum/vent hose connections and electrical connections of the transfer case. Removal of the transfer case shift motor and sensor connectors, and the front and rear driveshafts. In some of the models it is perhaps required to remove the rear crossmember of the concerned car. Place transmission jack under the transmission and transfer case passing the safety chain around the transfer case. Located at the transfer case-to-transmission bolts/nuts and provide all necessary wires and hoses disconnected, than take the transfer case and its jack towards backward but must maintain a level position to the vehicle. After the input shaft is clear again it is now safe to lower the transfer case and take it off under the vehicle. For installation of the gasket, aluminium gasket material must be entirely stripped from the rear of the transmission, new RTV sealant must be applied only to both sides of the gasket and this gasket put ideally on the mating surface. Once the transfer case is clamped to the jack raise it to the right height and place it in such a manner that the input shaft makes contact with the output shaft of the transmission, and aligning as required. Replace and torque the transfer case-to-transmission bolts/nuts, remove the safety chains and also take off the jack supporting the transfer case. If removed, first install the rear crossmember and then, using the transmission jack, have it removed. Reconnect all vacuum and vent lines and install as necessary and reconnect all electrical connectors. Join the shift motor and sensor electrical connectors of the transfer case, add transfer case lubricant if required, and inspect the transmission lubricant level if present. If the vehicle is equipped with skid plate, then install it and after that take out the jackstands; put down the vehicle; connect the negative terminal of the battery and perform a road test to check whether it works properly and if there is any leakage or not.