How to Service and Repair a Clutch Master Cylinder on Dodge Challenger?

Before servicing or repairing the clutch master cylinder, take off and isolate the negative battery cable. Put towels or rags beneath the clutch master cylinder so the brake fluid does not spill onto your carpet. Pull away the driver side silencer from behind the instrument panel and from the bottom center of the steering column cover and reinforcement. Always replace the pushrod retainer clip with a new one to maintain control over your vehicle and protect from injury. Take out the retainer clip at the clutch pedal lever that holds the pushrod and then pull off the pushrod from the lever. Afterward, unplug the clutch starter interlock switch harness connector, the brake/clutch fluid reservoir supply line and seal the line to prevent a lot of brake fluid coming out. Take off the clutch slave cylinder hydraulic line and undo the two nuts that hold the clutch master cylinder on the clutch/brake pedal assembly before you remove it from its position.

How to Service and Repair a Clutch Master Cylinder on Dodge Ram 1500?

First, raise and hold up the car safely and then pull away the heat shield located over the hydraulic line. After that, get rid of the two nuts that hold the slave cylinder to the clutch housing and remove the slave cylinder. Take out the plastic clip from the lower dash panel flange and then take out the clip from the upper dash panel stud. Pull your vehicle down and cut the yellow connector for the clutch pedal interlock switch. Pull out the rod pin from the clutch master cylinder and secure the lid on the clutch cylinder's reservoir. After that, remove the screws that connect the clutch master cylinder to the dash and pull out the clutch cylinders, reservoir and connecting lines from the car.

OEM Dodge Clutch Master Cylinder

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

32 Clutch Master Cylinders found

View related parts
Dodge Clutch Assembly Part Number: 4883517AA
$81.00 MSRP: $233.00
You Save: $152.00 (66%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder - Clutch Master Cylinder; Hydraulic Assembly Clutch Master Cylinder
Fits the following Dodge Models:
- Dakota | 1998-1999 | Base, SLT, Sport | 8 Cyl 5.2 L GAS
View related parts
Dodge Master Cylinder Part Number: 68265776AA
$130.46 MSRP: $197.00
You Save: $66.54 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Master Cylinder - Clutch; Clutch Master Cylinder; Brake Master Cylinder; Master Cylinder Assembly Clutch Will Include Switch Item # 3; Master Cylinder Assembly Clutch Includes Switch Item #2
- Replaces: 68084712AA, 68027905AB
Fits the following Dodge Models:
- Challenger | 2009-2023 | 392 Hemi Scat Pack Shaker, GT, R/T, R/T 392, R/T Classic, R/T Plus, R/T Plus Shaker, R/T Scat Pack, R/T Scat Pack Shaker Widebody, R/T Scat Pack Widebody, R/T Shaker, Rallye Redline, SE, SRT 392, SRT Demon, SRT Demon 170, SRT Hellcat, SRT Hellcat Jailbreak, SRT Hellcat Redeye, SRT Hellcat Redeye Jailbreak, SRT Hellcat Redeye Widebody, SRT Hellcat Redeye Widebody Jailbreak, SRT Hellcat Widebody, SRT Hellcat Widebody Jailbreak, SRT Jailbreak, SRT Super Stock, SRT8, SXT, SXT Plus, Scat Pack, Scat Pack 392 Widebody, T/A, T/A 392, T/A 392 Widebody | 5.7L V8, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6.1L V8, 6.4L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS
View related parts
Dodge Hydraulic Assembly Part Number: 52107620AB
$235.37 MSRP: $298.38
You Save: $63.01 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder - Clutch Master Cylinder; Hydraulic Assembly Clutch Master Cylinder
Fits the following Dodge Models:
- Ram 1500 | 1998-1999 | Laramie, SS/T 5.9L, ST, Sport, WS | 6 Cyl 3.9 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
- Ram 2500 | 1998-1999 | Base | 8 Cyl 5.9 L GAS
- Ram 3500 | 1998-1999 | Base | 8 Cyl 5.9 L GAS
View More
View related parts
Dodge Hydraulic Assembly Part Number: 55366325AG
$271.92 MSRP: $403.00
You Save: $131.08 (33%)
ADD TO CART
Product Specifications
- Other Name: Cylinder - Clutch Master Cylinder
- Replaces: 55366325AF, 55366325AD, 55366325AE, 55366325AC, 55366325AB, 68066098AA
Fits the following Dodge Models:
- Ram 2500 | 2006-2010 | Laramie, Power Wagon, SLT, ST, SXT, Sport, TRX, TRX4 | 5.9L L6, 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL, 6.7L L6, 8 Cyl 5.7 L GAS
- Ram 3500 | 2006-2010 | Laramie, SLT, ST, SXT, Sport, TRX4 | 5.9L L6, 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL, 6.7L L6
View related parts
Dodge Hydraulic Assembly Part Number: 52110496AD
$310.44 MSRP: $461.00
You Save: $150.56 (33%)
ADD TO CART
Product Specifications
- Other Name: Cylinder - Clutch Master Cylinder
- Replaces: 52110496AC, 52110496AA, 52110496AB
Fits the following Dodge Models:
- Ram 1500 | 2002-2005 | Laramie, SLT, ST | 3.7L V6, 4.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 5.9 L GAS
- Ram 2500 | 2003-2008 | Laramie, Power Wagon, SLT, ST, SXT, Sport, TRX4 | 5.7L V8, 8 Cyl 5.7 L GAS
- Ram 3500 | 2003-2008 | Laramie, SLT, ST, SXT, Sport | 5.7L V8, 8 Cyl 5.7 L GAS
View More
View related parts
Dodge Hydraulic Assembly Part Number: 52110495AG
$321.56 MSRP: $487.00
You Save: $165.44 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Clutch - Clutch Master Cylinder
- Replaces: 52110495AD, 52110495AE, 52110495AF
Fits the following Dodge Models:
- Ram 1500 | 2005-2008 | Laramie, SLT, ST, SXT, TRX4 | 3.7L V6, 4.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
- Ram 2500 | 2003-2005 | Laramie, SLT, ST | 6 Cyl 5.9 L DIESEL
- Ram 3500 | 2003-2005 | Laramie, SLT, ST | 6 Cyl 5.9 L DIESEL
View More
View related parts
Dodge Master Cylinder Part Number: 5273266AE
$57.67 MSRP: $85.05
You Save: $27.38 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Actuator - Hydraulic Clutch; Clutch Master Cylinder
- Replaces: 5273266AD, 5273266AC
Fits the following Dodge Models:
- Caliber | 2009-2012 | Express, Heat, Mainstreet, R/T, Rush, SE, SRT-4, SXT, SXT Plus, Uptown | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Dodge Master Cylinder Part Number: 4642666AH
$249.26 MSRP: $371.00
You Save: $121.74 (33%)
ADD TO CART
Product Specifications
- Other Name: Hydraulic Control - Hydraulic Clutch; Clutch Master Cylinder
- Replaces: 4642666AF, 4642666AD
Fits the following Dodge Models:
- Viper | 2008-2010, 2003-2006 | SRT-10, SRT-10 ACR | 10 Cyl 8.3 L GAS, 10 Cyl 8.4 L GAS, 8.3L V10, 8.4L V10
View related parts
Dodge Hydraulic Control - Hydraulic Clutch Part Number: 5038637AE
$352.66 MSRP: $516.00
You Save: $163.34 (32%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: HYDRAULIC CLUTCH
- Replaces: 5038637AB, 5038637AD, 5038637AC
Fits the following Dodge Models:
- Viper | 2013-2017 | ACR, Base, GT, GTC, GTS | 10 Cyl 8.4 L GAS, 8.4L V10
View related parts
Dodge Clutch Assembly Part Number: 5072482AA
$405.02 MSRP: $534.00
You Save: $128.98 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hydraulic Control - Clutch Master Cylinder; Hydraulic Assembly Clutch Master Cylinder
Fits the following Dodge Models:
- Dakota | 2002-2003 | Base, SLT, SXT, Sport | 4 Cyl 2.5 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 4.7 L GAS
View related parts
Dodge Clutch Assembly Part Number: 4883516AC
$64.70 MSRP: $82.02
You Save: $17.32 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hydraulic Control - Clutch Master Cylinder; Hydraulic Assembly Clutch Master Cylinder
Fits the following Dodge Models:
- Dakota | 2000-2001 | Base, SLT, Sport | 4 Cyl 2.5 L GAS, 6 Cyl 3.9 L GAS
View related parts
Dodge Clutch Assembly Part Number: 5134623AE
Product Specifications
- Other Name: Cylinder - Clutch Master Cylinder; Actuator Assembly; Hydraulic Assembly Clutch Master Cylinder
- Replaces: 5134623AA, 5134623AD, 5134623AB, 5134623AC
Fits the following Dodge Models:
- Dakota | 2004-2009 | Base, Big Horn, Laramie, Lone Star, SLT, SLT Plus, ST, SXT, Sport, Sport Plus, TRX, TRX4 | 3.7L V6, 4.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
View related parts
Dodge Master Cylinder Part Number: 52104854AC
$111.60 MSRP: $166.00
You Save: $54.40 (33%)
Product Specifications
- Other Name: Actuator - Clutch Master Cylinder
- Replaces: 52104854AB, 52104854AA
Fits the following Dodge Models:
- Dart | 2012-2016 | Aero, GT, Limited, R/T, Rallye, SE, SXT | 1.4L L4, 2.0L L4, 2.4L L4, 4 Cyl 1.4 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Dodge Master Cylinder Part Number: MR519868
Product Specifications
- Other Name: Cylinder - Clutch Master; Clutch Master Cylinder; Cylinder Clutch Master
Fits the following Dodge Models:
- Stratus | 2001-2005 | R/T, SE | 6 Cyl 3.0 L GAS
View related parts
Dodge Master Cylinder Repair Kit Part Number: MR272770
Product Specifications
- Other Name: Cylinder - Clutch Master; Clutch Master Cylinder; Cylinder Kit Clutch Master
Fits the following Dodge Models:
- Stratus | 2002-2005 | R/T | 6 Cyl 3.0 L GAS
View related parts
Dodge Master Cylinder Part Number: MB911650
Product Specifications
- Other Name: Cylinder; Cylinder, Clutch Master, W/Turbo; Cylinder Clutch Master
Fits the following Dodge Models:
- Avenger | 1995-1999 | Base, ES | 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS
View related parts
Dodge Master Cylinder Repair Kit Part Number: MB870511
Product Specifications
- Other Name: Cylinder; Cylinder Kit, Repair, Master; Cylinder Kit, Clutch Master; Cylinder Clutch Master
Fits the following Dodge Models:
- Avenger | 1995-1999 | Base, ES | 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS
- Stealth | 1992-1996 | Base, ES, R/T, R/T Turbo | 6 Cyl 3.0 L GAS
View related parts
Dodge Master Cylinder Part Number: MB555277
Product Specifications
- Other Name: Cylinder - Clutch Master; Clutch Master Cylinder; Cylinder Assembly, Clutch Master; Master Cylinder Assembly, Clutch
Fits the following Dodge Models:
- Stealth | 1991-1996 | Base, ES, R/T, R/T Turbo | 6 Cyl 3.0 L GAS
View related parts
Dodge Master Cylinder Part Number: MB555031
Product Specifications
- Other Name: Cylinder Assembly, Clutch Master; Clutch Master Cylinder
Fits the following Dodge Models:
- Colt | 1989 | Base, DL, E, GT, Vista | 4 Cyl 1.5 L GAS, 4 Cyl 1.6 L GAS, 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS
View related parts
Dodge Hydraulic Assembly Part Number: 52107721AB
Product Specifications
- Other Name: Hydraulic Control - Clutch Master Cylinder; Hydraulic Assembly Clutch Master Cylinder
Fits the following Dodge Models:
- Ram 2500 | 1998-1999 | Base | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL
- Ram 3500 | 1998-1999 | Base | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL

| Page 1 of 2 |Next >

1-20 of 32 Results

Dodge Clutch Master Cylinder

OEM parts sourced directly from Dodge deliver superior quality, long lasting strength, and a precise fit you can trust. Each item goes through strict quality checks to ensure safety, toughness, and performance that matches your factory equipment. At JeepPartsDeal online shop, you'll get top-quality, budget-friendly OEM Dodge Clutch Master Cylinder for your vehicle. We focus on giving you a high standard without pushing up the price. Our full selection of genuine factory products comes backed by the original manufacturer's warranty. You'll love our fast delivery, seamless shopping experience, and convenient return policy, saving you all the hassle.

Dodge Clutch Master Cylinder Parts and Q&A

Master Cylinder
68265776AA
Q: How to Service and Repair a Clutch Master Cylinder on Dodge Challenger?
A:
Before servicing or repairing the clutch master cylinder, take off and isolate the negative battery cable. Put towels or rags beneath the clutch master cylinder so the brake fluid does not spill onto your carpet. Pull away the driver side silencer from behind the instrument panel and from the bottom center of the steering column cover and reinforcement. Always replace the pushrod retainer clip with a new one to maintain control over your vehicle and protect from injury. Take out the retainer clip at the clutch pedal lever that holds the pushrod and then pull off the pushrod from the lever. Afterward, unplug the clutch starter interlock switch harness connector, the brake/clutch fluid reservoir supply line and seal the line to prevent a lot of brake fluid coming out. Take off the clutch slave cylinder hydraulic line and undo the two nuts that hold the clutch master cylinder on the clutch/brake pedal assembly before you remove it from its position.
Hydraulic Assembly
52110495AG
Q: How to Service and Repair a Clutch Master Cylinder on Dodge Ram 1500?
A:
First, raise and hold up the car safely and then pull away the heat shield located over the hydraulic line. After that, get rid of the two nuts that hold the slave cylinder to the clutch housing and remove the slave cylinder. Take out the plastic clip from the lower dash panel flange and then take out the clip from the upper dash panel stud. Pull your vehicle down and cut the yellow connector for the clutch pedal interlock switch. Pull out the rod pin from the clutch master cylinder and secure the lid on the clutch cylinder's reservoir. After that, remove the screws that connect the clutch master cylinder to the dash and pull out the clutch cylinders, reservoir and connecting lines from the car.