How to Remove and Install a Power Steering Pressure Switch on Jeep Cherokee?

Unlike other models, 4.0L engines do not need a power steering pressure switch and this is placed in the high-pressure power steering hose instead. You should disconnect the wire connector from the switch before catching any extra oil with a small container or a shop towel. Use another wrench to hold the power steering line in place so that you don't bend the switch while removing it. To fit the switch, tighten it onto the power steering line to a torque of 14 - 22 Nm (124 - 195 in. lbs.). Check the fluid after connecting the electrical connector and add more if it's not at the proper mark. Once the engine is cranking, examine the power steering fluid and add some more if it's low.

OEM Jeep Cherokee Power Steering Pressure Switch

Power Steering Oil Pressure Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Power Steering Pressure Switch found

View related parts
Jeep Cherokee Pressure Switch, Front Part Number: 56027906AC
Product Specifications
- Other Name: Switch - Power Steering; Power Steering Pressure Switch, Front; Switch
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1997-2000 Jeep Cherokee | SE | 4 Cyl 2.5 L GAS

Jeep Cherokee Power Steering Pressure Switch

Choose OEM Power Steering Pressure Switch that meet Jeep factory standards. Jeep designs and tests every component for precision and durability. Each Power Steering Pressure Switch follows strict manufacturing steps to lock in quality and fit. If your Jeep Cherokee matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Cherokee parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Jeep Cherokee Power Steering Pressure Switch Parts and Q&A

Pressure Switch, Front
56027906AC
Q: How to Remove and Install a Power Steering Pressure Switch on Jeep Cherokee?
A:
Unlike other models, 4.0L engines do not need a power steering pressure switch and this is placed in the high-pressure power steering hose instead. You should disconnect the wire connector from the switch before catching any extra oil with a small container or a shop towel. Use another wrench to hold the power steering line in place so that you don't bend the switch while removing it. To fit the switch, tighten it onto the power steering line to a torque of 14 - 22 Nm (124 - 195 in. lbs.). Check the fluid after connecting the electrical connector and add more if it's not at the proper mark. Once the engine is cranking, examine the power steering fluid and add some more if it's low.