How to Install a Rear Suspension Bump Stop on Jeep Commander?

To fix the rear suspension bump stop, first put the bumper and cup into place, then tighten them to 54 Nm (40 ft. lbs.). Then, mount the bump stop, put the upper isolator in place and position the lower isolator (2). To get the coil spring into the lower isolator, push the axle down and after that, jack it back up using a hydraulic jack. Attach the shock absorber to the axle bracket and fasten its bolts to 115 Nm (85 ft. lbs.) and then tie the stabilizer bar link to the body rail, tightening those bolts to 102 Nm (75 ft. lbs.). In the end, install the tire and wheel, remove the loading supports and bring down the vehicle.

OEM Jeep Commander Bump Stop

Bump Stopper

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Bump Stops found

View related parts
Jeep Commander Stop Bumper, Front Part Number: 55360410AA
$21.15 MSRP: $30.90
You Save: $9.75 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Stop/Bumper - Jounce Bumper; Bumper Cover Grommet, Front; Bumper Cover Stop, Front; Bumper Suspension Jounce; Spacer Jounce Bumper
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2010 Jeep Commander | 65th Anniversary Edition, Base, Limited, Overland, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
Jeep Commander Jounce Bumper, Front Part Number: 52089347AA
$30.32 MSRP: $44.40
You Save: $14.08 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper - Jounce; Coil Spring Damper, Front; Control Arm Bumper; Bumper; Bumper Jounce
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2010 Jeep Commander | 65th Anniversary Edition, Base, Limited, Overland, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
Jeep Commander Bumper, Rear Part Number: 52089343AA
$37.97 MSRP: $56.50
You Save: $18.53 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Stop/Bumper - Jounce; Coil Spring Damper, Rear; Bumper Jounce
- Position: Rear
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2010 Jeep Commander | 65th Anniversary Edition, Base, Limited, Overland, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS

Jeep Commander Bump Stop

Choose OEM Bump Stop that meet Jeep factory standards. Jeep designs and tests every component for precision and durability. Each Bump Stop follows strict manufacturing steps to lock in quality and fit. If your Jeep Commander matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Commander parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Jeep Commander Bump Stop Parts and Q&A

Bumper, Rear
52089343AA
Q: How to Install a Rear Suspension Bump Stop on Jeep Commander?
A:
To fix the rear suspension bump stop, first put the bumper and cup into place, then tighten them to 54 Nm (40 ft. lbs.). Then, mount the bump stop, put the upper isolator in place and position the lower isolator (2). To get the coil spring into the lower isolator, push the axle down and after that, jack it back up using a hydraulic jack. Attach the Shock Absorber to the axle bracket and fasten its bolts to 115 Nm (85 ft. lbs.) and then tie the stabilizer bar link to the body rail, tightening those bolts to 102 Nm (75 ft. lbs.). In the end, install the tire and wheel, remove the loading supports and bring down the vehicle.