How to Maintain and Fix a Brake Fluid Level Sensor on Jeep Commander?

First, disconnect the wire plug from the end of the Brake Fluid Level Sensor/Switch. After that, at the same side of the master cylinder reservoir, lift the locking tabs on the sensor with a tiny screwdriver. Afterward, remove the sensor from the reservoir by pulling it from its connector end.

OEM Jeep Commander Brake Fluid Level Sensor

Brake Fluid Liquid Level Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Brake Fluid Level Sensor found

View related parts
Jeep Commander Fluid Level Sensor Part Number: 5013903AA
Product Specifications
- Other Name: Sensor - Brake Fluid Level; Brake Fluid Level Switch; Fluid Sensor; Sensor Brake Fluid Level
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2010 Jeep Commander | 65th Anniversary Edition, Base, Limited, Overland, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS

Jeep Commander Brake Fluid Level Sensor

Choose OEM Brake Fluid Level Sensor that meet Jeep factory standards. Jeep designs and tests every component for precision and durability. Each Brake Fluid Level Sensor follows strict manufacturing steps to lock in quality and fit. If your Jeep Commander matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Commander parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Jeep Commander Brake Fluid Level Sensor Parts and Q&A

Fluid Level Sensor
5013903AA
Q: How to Maintain and Fix a Brake Fluid Level Sensor on Jeep Commander?
A:
First, disconnect the wire plug from the end of the Brake Fluid Level Sensor/Switch. After that, at the same side of the master cylinder reservoir, lift the locking tabs on the sensor with a tiny screwdriver. Afterward, remove the sensor from the reservoir by pulling it from its connector end.