How to Service a Cooling Fan Assembly on Jeep Cherokee?

You should first remove the battery negative cable before servicing the electric cooling fan module. Tap the hose a bit to disconnect it from the filler neck, then draw the hose through the loops in the shroud. Pull the power steering reservoir away from the fan shroud and keep it ready for installation. Take off the four viscous fan/drive assembly mounting nuts from the water pump and remove the whole viscous fan assembly. Take off the cooling fan connections and unscrew the four mounting screws on top of the shroud. Take out the fan and shroud assembly and separate its fan harness from the shroud. Remove the Phillips screws in the shroud under the four fan module and then remove the module. To install, set the fan module into the shroud so that the harness comes out of the motor at the 12 o'clock point, screw in and tighten the fan module to the shroud for 3 Nm (31 inch lbs.). Put the fan harness through the shroud and secure it as you should. Set the fan and shroud below the motherboard where the shroud alignment tabs fit into the radiator's slots below. Screw and tighten together the upper fan shroud using a 3 Nm (31 inch lbs.) torque when all is well-positioned. Install the fan its electrical connector, mount the power steering reservoir back on the shroud and connect the viscous fan drive assembly to the water pump hub, tightening the nuts to 27 Nm (20 ft. lbs.). Complete your work by fixing the negative cable onto the battery.

How to Service the Cooling Fan Assembly for 2.5L and 4.0L Engines on Jeep Wrangler?

Automotive cooling fan maintenance can start by loosening the four fan hub nuts without taking them out from the 2.5L engine. Head the fan drive/blade off the water pump's hub shaft by using the nut at the mounting point; the right-hand threads will allow you to turn it counterclockwise. Working with a proper fan wrench, release the fan drive and remove the belt for the accessories. Certain models need you to take off the fan shroud to reach and remove the fan drive with the fan blade. Unbolt the four fan hub mounting nuts on the 2.5L engine and take out the fan/viscous fan drive unit. After you have removed the thermal viscous fan drive, keep it in a vertical position to avoid the silicone from reaching and polluting the bearing lubricant. When installing, assemble the fan blade to the viscous fan drive and tighten the mounting bolts using 27 Nm (20 ft. lbs.) torque. Place the mounting flange of the fan blade/viscous fan drive assembly onto the hub for the 2.5L engine, install the four nuts and tighten them to 24 Nm (18 ft. lbs.) torque, making sure you tighten the first two nuts 180 degrees apart before the last two. Client the fan and fan drive onto the water pump pulley for the 4.0L engine. While putting on the serpentine accessory drive belt, check the route so that the water pump does not cause the engine to overheat.

OEM Jeep Cooling Fan Assembly

Engine Cooling Fan

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

68 Cooling Fan Assemblys found

View related parts
Jeep Fan Blade Part Number: 52027893
$268.26 MSRP: $340.00
You Save: $71.74 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Fan - Cooling; Engine Cooling Fan Clutch Blade; Radiator Fan Assembly; Fan Cooling
Fits the following Jeep Models:
- Wrangler | 1997-2006 | 65th Anniversary Edition, Rubicon, SE, Sahara, Sport, Unlimited, Unlimited Rubicon, X | 4 Cyl 2.4 L GAS, 6 Cyl 4.0 L GAS
View related parts
Jeep Fan Blade Part Number: 68039593AA
$85.63 MSRP: $128.00
You Save: $42.37 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Fan - Cooling; Dual Radiator and Condenser Assembly; Engine Cooling Fan.; Fan Cooling Electric; Fan Cooling
Fits the following Jeep Models:
- Wrangler | 2010-2011 | 70th Anniversary, Rubicon, Sahara, Sport, Unlimited 70th Anniversary, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport, Unlimited X, X | 6 Cyl 3.8 L GAS
View related parts
Jeep Fan Assembly, Front Part Number: 68272755AD
$472.94 MSRP: $714.00
You Save: $241.06 (34%)
ADD TO CART
Product Specifications
- Other Name: Fan Assembly - Radiator Cooling; Engine Cooling Fan; Dual Radiator and Condenser Fan.; Fan Module; Fan Module Radiator Cooling; Cooling Fan Assembly
- Position: Front
- Replaces: 68272755AC, 68272755AB, 68272755AA
Fits the following Jeep Models:
- Gladiator | 2020-2025 | 80th Anniversary, Altitude, Freedom, High Altitude, High Tide, Jeep Beach, Launch Edition, Mojave, Mojave X, NightHawk, Overland, Rubicon, Rubicon X, Sport, Sport S, Texas Trail, Willys, Willys Sport | 6 Cyl 3.6 L GAS
- Wrangler | 2018-2025 | 80th Anniversary, Freedom, Islander, Rubicon, Rubicon X, Sport, Sport S, Unlimited 80th Anniversary, Unlimited Freedom, Unlimited High Altitude, Unlimited Islander, Unlimited Rubicon, Unlimited Rubicon X, Unlimited Sahara, Unlimited Sahara Altitude, Unlimited Sport, Unlimited Sport Altitude, Unlimited Sport S, Unlimited Willys, Unlimited Willys Sport, Willys, Willys Sport | 2.0L L4, 3.0L V6, 4 Cyl 2.0 L GAS, 4 Cyl 2.0 L MILD HYBRID EV-GAS (MHEV), 6 Cyl 3.0 L DIESEL
View related parts
Jeep Fan Assembly Part Number: 55037992AD
$481.78 MSRP: $727.00
You Save: $245.22 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Fan Module - Radiator Cooling; Engine Cooling Fan Assembly; Dual Fan Assembly; Fan Blade; Fan Module; Fan Module Radiator Cooling; Cooling Fan Assembly
Fits the following Jeep Models:
- Grand Cherokee | 2011-2022 | 75th Anniversary, 80th Anniversary, Altitude, High Altitude, Laredo, Laredo E, Laredo X, Limited, Limited X, Overland, Overland Summit, SRT8, Summit, Summit Reserve, Trailhawk, Upland | 6 Cyl 3.6 L FLEX, 8 Cyl 5.7 L GAS, 8 Cyl 6.4 L GAS
- Grand Cherokee WK | 2022 | Laredo E, Laredo X, Limited | 6 Cyl 3.6 L FLEX
View related parts
Jeep Fan Blade Part Number: 68031871AA
$47.44 MSRP: $68.30
You Save: $20.86 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fan - Cooling; A/C Condenser Fan Assembly; Engine Cooling Fan Blade; Dual Radiator Fan Assembly.; Fan Assembly; Fan Cooling Includes: Nut; Fan Cooling
- Replaces: 5104787AA
Fits the following Jeep Models:
- Compass | 2008-2017 | 75th Anniversary, Altitude, Base, High Altitude, Latitude, Limited, Sport | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
- Patriot | 2008-2017 | 75th Anniversary, Latitude, Latitude X, Limited, Sport | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Jeep Fan Blade Part Number: 55038108AA
$82.14 MSRP: $122.00
You Save: $39.86 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fan - Cooling; Engine Cooling Fan Clutch Blade; Radiator Fan Assembly; Fan Cooling
- Replaces: 55116884AA
Fits the following Jeep Models:
- Commander | 2006-2010 | 65th Anniversary Edition, Base, Limited, Sport | 3.7L V6, 4.7L V8, 5.7L V8, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
- Grand Cherokee | 2005-2009 | 65th Anniversary Edition, Laredo, Limited | 3.0L V6, 3.7L V6, 4.7L V8, 5.7L V8, 6.1L V8, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
- Liberty | 2008-2012 | Jet, Limited, Renegade, Sport | 3.7L V6, 6 Cyl 3.7 L GAS
View More
View related parts
Jeep Fan Blade Part Number: 52079654AE
$138.13 MSRP: $206.00
You Save: $67.87 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Fan - Cooling; Engine Cooling Fan Clutch Blade; Radiator Fan Assembly; Fan Cooling Mechanical
- Replaces: 52079654AD
Fits the following Jeep Models:
- Liberty | 2002-2007 | 65th Anniversary Edition, Limited, Renegade, Rocky Mountain Edition, Sport | 2.4L L4, 2.8L L4, 3.7L V6, 6 Cyl 3.7 L GAS
- Wrangler | 2007-2012 | 3.8L V6
View related parts
Jeep Fan Assembly Part Number: 68249185AD
$310.44 MSRP: $458.00
You Save: $147.56 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Fan Module - Radiator Cooling; Engine Cooling Fan Assembly; Dual Fan Assembly; Fan Blade; Fan Module; Fan Module Radiator Cooling; Cooling Fan Assembly
- Replaces: 68249185AC, 68249185AA, 68249185AB
Fits the following Jeep Models:
- Compass | 2017-2022 | 80th Anniversary, Altitude, High Altitude, Latitude, Latitude Lux, Limited, Red, Sport, Trailhawk, Upland | 2.4L L4, 4 Cyl 2.4 L GAS
View related parts
Jeep Fan Shroud, Front Part Number: 68437465AB
$436.48 MSRP: $659.00
You Save: $222.52 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Fan - Radiator Cooling; Engine Cooling Fan Assembly, Front; Radiator Fan Assembly; Cooling Fan Module; Fan Blade; Fan Assembly; Fan Module; Fan Module Radiator Cooling
- Position: Front
Fits the following Jeep Models:
- Cherokee | 2014-2023 | 75th Anniversary, 80th Anniversary, Altitude, Altitude Lux, High Altitude, Latitude, Latitude Lux, Latitude Plus, Limited, Overland, Sport, Trailhawk, Trailhawk Elite, Upland, X | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 3.2 L GAS
View related parts
Jeep Fan Assembly Part Number: 52014787AC
$575.71 MSRP: $869.00
You Save: $293.29 (34%)
ADD TO CART
Product Specifications
- Other Name: Fan Module - Radiator Cooling; Engine Cooling Fan Assembly; Dual Fan Assembly; Fan Blade; Fan Module; Fan Module Radiator Cooling; Cooling Fan Assembly; Engine Cooling Fan
- Replaces: 52014787AB
Fits the following Jeep Models:
- Grand Cherokee | 2014-2022 | 75th Anniversary, 80th Anniversary, Altitude, High Altitude, Laredo, Laredo E, Laredo X, Limited, Limited X, Overland, SRT, Summit, Summit Reserve, Trailhawk, Upland | 3.0L V6, 3.6L V6, 5.7L V8, 6 Cyl 3.0 L DIESEL, 6 Cyl 3.6 L FLEX, 6.4L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.4 L GAS
- Grand Cherokee WK | 2022 | Laredo E, Laredo X, Limited | 6 Cyl 3.6 L FLEX
View related parts
Jeep Fan Shroud Part Number: 68143894AB
$635.38 MSRP: $959.00
You Save: $323.62 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Fan - Radiator Cooling; Dual Radiator and Condenser Assembly; Engine Cooling Fan; Fan Blade; Fan Assembly; Fan Module Radiator Cooling
- Replaces: 68143894AA
Fits the following Jeep Models:
- Wrangler | 2012-2017 | 75th Anniversary, Rubicon, Sahara, Sport, Sport S, Unlimited 75th Anniversary, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport, Unlimited Sport S | 3.6L V6, 6 Cyl 3.6 L GAS
- Wrangler JK | 2018 | Rubicon, Sahara, Sport, Sport S, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport, Unlimited Sport S | 6 Cyl 3.6 L GAS
View related parts
Jeep Fan Module Part Number: 55115918AE
$266.95 MSRP: $352.00
You Save: $85.05 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Condenser - A/C; A/C Condenser; Condenser A/C; Condenser
- Replaces: 55115918AC
Fits the following Jeep Models:
- Grand Cherokee | 1999-2004 | Laredo, Limited, Overland, Special Edition, Sport | 4.0L L6, 4.7L V8, 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS
View related parts
Jeep Fan Assembly Part Number: 55056642AD
$111.49 MSRP: $164.00
You Save: $52.51 (33%)
ADD TO CART
Product Specifications
- Other Name: Fan - Radiator Cooling; Engine Cooling Fan Assembly; Radiator Fan Assembly; Fan Blade; Fan Module Radiator Cooling
Fits the following Jeep Models:
- Wrangler | 2009 | Rubicon, Sahara, Unlimited Rubicon, Unlimited Sahara, Unlimited X, X | 6 Cyl 3.8 L GAS
View related parts
Jeep Fan Assembly Part Number: 68461974AA
$309.99 MSRP: $412.00
You Save: $102.01 (25%)
ADD TO CART
Product Specifications
- Other Name: Module - Radiator Cooling; Engine Cooling Fan Assembly; Radiator; Radiator Fan Assembly; Fan Blade; Fan Module; Fan Module Radiator Cooling
- Replaces: 68363855AA, 68337149AA
Fits the following Jeep Models:
- Renegade | 2017-2021 | 80th Anniversary, Altitude, Islander, Jeepster, Latitude, Limited, Sport, Trailhawk, Upland | 2.4L L4, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS
View related parts
Jeep Fan Assembly Part Number: 55056642AB
Product Specifications
- Other Name: Fan - Radiator Cooling; Engine Cooling Fan Assembly; Radiator Fan Assembly; Fan Blade; Fan Motor Assembly; Fan Module Radiator Cooling
Fits the following Jeep Models:
- Wrangler | 2007-2009 | Rubicon, Sahara, Unlimited Rubicon, Unlimited Sahara, Unlimited X, X, X-S | 6 Cyl 3.8 L GAS
View related parts
Jeep Fan Module Part Number: 52079860AA
Product Specifications
- Other Name: Fan; Radiator Fan Assembly; Fan Blade; Fan Module Radiator Cooling; Shroud Fan
Fits the following Jeep Models:
- Grand Cherokee | 2001-2004 | Laredo, Limited, Overland, Special Edition, Sport | 8 Cyl 4.7 L GAS
View related parts
Jeep Fan Blade Part Number: 52079441
Product Specifications
- Other Name: Fan - Cooling; Radiator Fan Assembly; Fan Cooling
Fits the following Jeep Models:
- Grand Cherokee | 1999-2000 | Laredo, Limited | 6 Cyl 4.0 L GAS
View related parts
Jeep Fan Assembly Part Number: 5143021AA
Product Specifications
- Other Name: Fan - Cooling; Radiator Fan Assembly; Fan Blade; Fan Cooling Electric; Fan Cooling
Fits the following Jeep Models:
- Liberty | 2005-2006 | Limited, Sport | 4 Cyl 2.8 L DIESEL
View related parts
Jeep Fan Clutch Part Number: 68065080AA
Product Specifications
- Other Name: Clutch - Fan; Engine Cooling Fan Clutch; Fan Blade
- Replaces: 52027890AB
Fits the following Jeep Models:
- Wrangler | 1997-2004 | Rubicon, SE, Sahara, Sport, X | 2.4L L4, 2.5L L4, 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 4.0 L GAS
View related parts
Jeep Fan Blade Part Number: 52028337AC
Product Specifications
- Other Name: Fan - Radiator Cooling; Dual Radiator and Condenser Assembly; Engine Cooling Fan.; Fan Assembly; Fan Motor Assembly
Fits the following Jeep Models:
- Cherokee | 1997-2001 | Classic, Country, Limited, SE, Sport | 4 Cyl 2.5 L GAS, 6 Cyl 4.0 L GAS

| Page 1 of 4 |Next >

1-20 of 68 Results

Jeep Cooling Fan Assembly

OEM parts sourced directly from Jeep deliver superior quality, long lasting strength, and a precise fit you can trust. Each item goes through strict quality checks to ensure safety, toughness, and performance that matches your factory equipment. At JeepPartsDeal online shop, you'll get top-quality, budget-friendly OEM Jeep Cooling Fan Assembly for your vehicle. We focus on giving you a high standard without pushing up the price. Our full selection of genuine factory products comes backed by the original manufacturer's warranty. You'll love our fast delivery, seamless shopping experience, and convenient return policy, saving you all the hassle.

Jeep Cooling Fan Assembly Parts and Q&A

Fan Blade
52028337AC
Q: How to Service a Cooling Fan Assembly on Jeep Cherokee?
A:
You should first remove the battery negative cable before servicing the electric cooling fan module. Tap the hose a bit to disconnect it from the filler neck, then draw the hose through the loops in the shroud. Pull the power steering reservoir away from the fan shroud and keep it ready for installation. Take off the four viscous fan/drive assembly mounting nuts from the water pump and remove the whole viscous fan assembly. Take off the cooling fan connections and unscrew the four mounting screws on top of the shroud. Take out the fan and shroud assembly and separate its fan harness from the shroud. Remove the Phillips screws in the shroud under the four fan module and then remove the module. To install, set the fan module into the shroud so that the harness comes out of the motor at the 12 o'clock point, screw in and tighten the fan module to the shroud for 3 Nm (31 inch lbs.). Put the fan harness through the shroud and secure it as you should. Set the fan and shroud below the motherboard where the shroud alignment tabs fit into the radiator's slots below. Screw and tighten together the upper fan shroud using a 3 Nm (31 inch lbs.) torque when all is well-positioned. Install the fan its electrical connector, mount the power steering reservoir back on the shroud and connect the viscous fan drive assembly to the water pump hub, tightening the nuts to 27 Nm (20 ft. lbs.). Complete your work by fixing the negative cable onto the battery.
Fan Blade
52027893
Q: How to Service the Cooling Fan Assembly for 2.5L and 4.0L Engines on Jeep Wrangler?
A:
Automotive cooling fan maintenance can start by loosening the four fan hub nuts without taking them out from the 2.5L engine. Head the fan drive/blade off the water pump's hub shaft by using the nut at the mounting point; the right-hand threads will allow you to turn it counterclockwise. Working with a proper fan wrench, release the fan drive and remove the belt for the accessories. Certain models need you to take off the fan shroud to reach and remove the fan drive with the fan blade. Unbolt the four fan hub mounting nuts on the 2.5L engine and take out the fan/viscous fan drive unit. After you have removed the thermal viscous fan drive, keep it in a vertical position to avoid the silicone from reaching and polluting the bearing lubricant. When installing, assemble the fan blade to the viscous fan drive and tighten the mounting bolts using 27 Nm (20 ft. lbs.) torque. Place the mounting flange of the fan blade/viscous fan drive assembly onto the hub for the 2.5L engine, install the four nuts and tighten them to 24 Nm (18 ft. lbs.) torque, making sure you tighten the first two nuts 180 degrees apart before the last two. Client the fan and fan drive onto the water pump pulley for the 4.0L engine. While putting on the serpentine accessory drive belt, check the route so that the water pump does not cause the engine to overheat.