How to Install a Fender and Its Associated Components on Jeep Grand Cherokee?

Place the front fender on the outside of the body and, if it has a radio antenna, mount that as well. Put all screws in your fender at first by hand, then straighten the fender and use the reference marks nearby to match it with the body. Apply 8.5 Nm (75 in lb) torque to all the leveling kit screws and go on to put on the rocker panel cover and front fascia. After this, attach the wheel liner and wheel, if they were separate.

How to Remove and Install a Fender on the Left Front Side on Jeep Wrangler?

Start by connecting the battery's negative cable before you disconnect the washer fluid reservoir, horns and EVAP canister from their positions. After that, take out the bolts that secure the ABS Hydraulic Control Unit (HCU) on the support tray and put them aside, before you remove the HCU tray. Release the retainers holding the front lighting wire harness on the fender and disconnect the headlamp connector, next run the fog lamp, park lamp and side marker wire through the access fender well hole. Unbolt the fender to the cowl, HCU tray reinforcement bracket and grille and lift the fender away from the rest of the vehicle. During the installation, move all the essential parts and switch any damaged harness retainers. Set the fender flange on the car and secure the bolts connecting it to the grille, next put the front lighting wire harness into its retainers on the fender and lock it into place. Bolt on the fender to its bracket and the cowl and, when available, secure the body side molding to the HCU tray reinforcement bracket and cowl. Feed the screen of the fog lamp, park lamp and other wires forward via the hole in the fender well and seat the grommet before connecting the headlamp harness to the headlights. First, put the HCU tray in place, put the HCU on the support tray and install the bolts next. Afterward, install the EVAP canister, the horns and connect the horn wires, place the windshield washer reservoir in the correct spot and hook the vehicle's ground cable back to the battery's negative post.

OEM Jeep Fender

Wheel Fender

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

50 Fenders found

View related parts
Jeep Fender, Front Passenger Side Part Number: 68085302AB
$112.45 MSRP: $166.00
You Save: $53.55 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fender - Front; Fender, Front Right; Fender Front
- Position: Front Passenger Side
- Replaces: 68085302AA
Fits the following Jeep Models:
- Compass | 2011-2017 | 75th Anniversary, Altitude, Base, High Altitude, Latitude, Limited, Sport | 2.0L L4, 2.4L L4, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Jeep Fender, Front Driver Side Part Number: 55394451AB
$123.50 MSRP: $182.00
You Save: $58.50 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fender - Front; Fender, Front Left; Fender Front
- Position: Front Driver Side
Fits the following Jeep Models:
- Grand Cherokee | 2005-2010 | 65th Anniversary Edition, Laredo, Limited, Overland, SRT8 | 6 Cyl 3.0 L DIESEL, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
Jeep Fender, Front Driver Side Part Number: 68079671AB
$243.60 MSRP: $360.00
You Save: $116.40 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fender - Front; Fender, Front Left; Fender Front
- Position: Front Driver Side
- Replaces: 68079671AA
Fits the following Jeep Models:
- Compass | 2011-2017 | 75th Anniversary, Altitude, Base, High Altitude, Latitude, Limited, Sport | 2.0L L4, 2.4L L4, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Jeep Fender, Front Driver Side Part Number: 68306752AA
$283.25 MSRP: $418.00
You Save: $134.75 (33%)
ADD TO CART
Product Specifications
- Other Name: Fender, Front Left; Panel Fender
- Position: Front Driver Side
Fits the following Jeep Models:
- Renegade | 2015-2023 | 75th Anniversary, 80th Anniversary, Altitude, Dawn Of Justice, High Altitude, Islander, Jeepster, Latitude, Limited, Red, Sport, Trailhawk, Upland | 4 Cyl 1.3 L GAS, 4 Cyl 1.4 L GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS
View related parts
Jeep Fender, Front Driver Side Part Number: 68103309AF
$296.85 MSRP: $438.00
You Save: $141.15 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fender - Front; Fender, Front Left; Fender Front
- Position: Front Driver Side
- Replaces: 68103309AB, 68103309AC, 68103309AE, 68103309AD, 68103309AA
Fits the following Jeep Models:
- Cherokee | 2014-2018 | 75th Anniversary, Latitude, Latitude Plus, Limited, Overland, Sport, Trailhawk | 2.4L L4, 3.2L V6, 4 Cyl 2.4 L GAS, 6 Cyl 3.2 L GAS
View related parts
Jeep Fender, Front Passenger Side Part Number: 68103308AF
$296.85 MSRP: $438.00
You Save: $141.15 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fender - Front; Fender, Front Right; Fender Front
- Position: Front Passenger Side
- Replaces: 68103308AD, 68103308AA, 68103308AB, 68103308AE, 68103308AC
Fits the following Jeep Models:
- Cherokee | 2014-2018 | 75th Anniversary, Latitude, Latitude Plus, Limited, Overland, Sport, Trailhawk | 2.4L L4, 3.2L V6, 4 Cyl 2.4 L GAS, 6 Cyl 3.2 L GAS
View related parts
Jeep Fender, Front Part Number: 68079925AA
$321.77 MSRP: $475.00
You Save: $153.23 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fender - Front; Fender Front
- Position: Front
Fits the following Jeep Models:
- Patriot | 2011-2017 | 75th Anniversary, Latitude, Latitude X, Limited, Sport | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Jeep Fender, Front Driver Side Part Number: 68029993AC
$659.52 MSRP: $961.00
You Save: $301.48 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Panel - Fender; Fender, Front Left
- Position: Front Driver Side
- Replaces: 68029993AB, 68002399AC, 68002399AD, 68002399AE, 68002399AB
Fits the following Jeep Models:
- Wrangler | 2007-2018 | 70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S, Unlimited 70th Anniversary, Unlimited 75th Anniversary, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport, Unlimited Sport S, Unlimited X, X | 3.6L V6, 3.8L V6, 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS
- Wrangler JK | 2018 | Rubicon, Sahara, Sport, Sport S, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport, Unlimited Sport S | 6 Cyl 3.6 L GAS
View related parts
Jeep Fender, Front Passenger Side Part Number: 68029992AC
$664.10 MSRP: $967.00
You Save: $302.90 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Panel - Fender; Fender, Front Right
- Position: Front Passenger Side
- Replaces: 68002398AD, 68002398AC, 68002398AE, 68002398AB, 68029992AB
Fits the following Jeep Models:
- Wrangler | 2007-2018 | 70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S, Unlimited 70th Anniversary, Unlimited 75th Anniversary, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport, Unlimited Sport S, Unlimited X, X | 3.6L V6, 3.8L V6, 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS
- Wrangler JK | 2018 | Rubicon, Sahara, Sport, Sport S, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport, Unlimited Sport S | 6 Cyl 3.6 L GAS
View related parts
Jeep Fender, Front Driver Side Part Number: 55360599AB
$311.66
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Fender - Front; Fender, Front Left; Fender Front
- Position: Front Driver Side
- Replaces: 55360599AA
Fits the following Jeep Models:
- Liberty | 2005-2007 | 65th Anniversary Edition, Limited, Renegade, Rocky Mountain Edition, Sport | 2.4L L4, 2.8L L4, 3.7L V6, 4 Cyl 2.4 L GAS, 4 Cyl 2.8 L DIESEL, 6 Cyl 3.7 L GAS
View related parts
Jeep Fender, Front Passenger Side Part Number: 55135900AC
$410.28
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Fender - Front; Fender, Front Right; Fender Front
- Position: Front Passenger Side
Fits the following Jeep Models:
- Grand Cherokee | 1999-2004 | Laredo, Limited, Overland, Special Edition, Sport | 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS
View related parts
Jeep Fender, Front Part Number: 68079924AA
$321.77 MSRP: $475.00
You Save: $153.23 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fender - Front; Fender Front
- Position: Front
Fits the following Jeep Models:
- Patriot | 2011-2017 | 75th Anniversary, Latitude, Latitude X, Limited, Sport | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Jeep Fender, Front Part Number: 5054316AB
$482.54 MSRP: $853.00
You Save: $370.46 (44%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Fender - Front
- Position: Front
- Replaces: 5054316AA
Fits the following Jeep Models:
- Patriot | 2007-2010 | Limited, Sport | 2.0L L4, 2.4L L4, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Jeep Fender Part Number: 68640470AA
$247.67 MSRP: $433.00
You Save: $185.33 (43%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Replaces: 68292514AC, 68292514AB
Fits the following Jeep Models:
- Cherokee | 2019-2023 | 80th Anniversary, Altitude, Altitude Lux, High Altitude, Latitude, Latitude Lux, Latitude Plus, Limited, Overland, Trailhawk, Trailhawk Elite, Upland, X | 2.0L L4, 2.4L L4, 3.2L V6, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 3.2 L GAS
View related parts
Jeep Fender, Front Passenger Side Part Number: 68079670AB
$125.76 MSRP: $185.00
You Save: $59.24 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fender - Front; Fender, Front Right; Fender Front
- Position: Front Passenger Side
- Replaces: 68079670AA
Fits the following Jeep Models:
- Compass | 2011-2017 | 75th Anniversary, Altitude, Base, High Altitude, Latitude, Limited, Sport | 2.0L L4, 2.4L L4, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Jeep Fender, Front Passenger Side Part Number: 55394450AB
$132.56 MSRP: $195.00
You Save: $62.44 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fender - Front; Fender, Front Right; Fender Front
- Position: Front Passenger Side
Fits the following Jeep Models:
- Grand Cherokee | 2005-2010 | 65th Anniversary Edition, Laredo, Limited, Overland, SRT8 | 6 Cyl 3.0 L DIESEL, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
Jeep Fender, Front Driver Side Part Number: 55399011AB
$141.63 MSRP: $210.00
You Save: $68.37 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fender - Front; Fender, Front Left; Fender Front
- Position: Front Driver Side
- Replaces: 55399011AA
Fits the following Jeep Models:
- Liberty | 2008-2012 | Jet, Limited, Renegade, Sport | 6 Cyl 3.7 L GAS
View related parts
Jeep Fender, Front Part Number: 56022321AA
Product Specifications
- Other Name: Fender - Front; Fender Front
- Position: Front
Fits the following Jeep Models:
- Cherokee | 1997-2001 | Classic, Country, Limited, SE, Sport | 4 Cyl 2.5 L GAS, 6 Cyl 4.0 L GAS
View related parts
Jeep Fender Part Number: 55031835
Product Specifications
- Other Name: Fender, Right
Fits the following Jeep Models:
- Grand Cherokee | 1993-1998 | 5.9 Limited, Base, Laredo, Limited, Orvis, SE, TSi | 6 Cyl 4.0 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
- Grand Wagoneer | 1993 | Base | 8 Cyl 5.2 L GAS
View related parts
Jeep Fender, Front Driver Side Part Number: 55135901AC
Product Specifications
- Other Name: Fender - Front; Fender, Front Left; Fender Front
- Position: Front Driver Side
Fits the following Jeep Models:
- Grand Cherokee | 1999-2004 | Laredo, Limited, Overland, Special Edition, Sport | 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS

| Page 1 of 3 |Next >

1-20 of 50 Results

Jeep Fender

OEM parts sourced directly from Jeep deliver superior quality, long lasting strength, and a precise fit you can trust. Each item goes through strict quality checks to ensure safety, toughness, and performance that matches your factory equipment. At JeepPartsDeal online shop, you'll get top-quality, budget-friendly OEM Jeep Fender for your vehicle. We focus on giving you a high standard without pushing up the price. Our full selection of genuine factory products comes backed by the original manufacturer's warranty. You'll love our fast delivery, seamless shopping experience, and convenient return policy, saving you all the hassle.

Jeep Fender Parts and Q&A

Fender, Front Driver Side
55394451AB
Q: How to Install a Fender and Its Associated Components on Jeep Grand Cherokee?
A:
Place the front fender on the outside of the body and, if it has a radio antenna, mount that as well. Put all screws in your fender at first by hand, then straighten the fender and use the reference marks nearby to match it with the body. Apply 8.5 Nm (75 in lb) torque to all the leveling kit screws and go on to put on the rocker panel cover and front fascia. After this, attach the wheel liner and wheel, if they were separate.
Fender, Front Driver Side
5003951AL
Q: How to Remove and Install a Fender on the Left Front Side on Jeep Wrangler?
A:
Start by connecting the battery's negative cable before you disconnect the washer fluid reservoir, horns and EVAP canister from their positions. After that, take out the bolts that secure the ABS Hydraulic Control Unit (HCU) on the support tray and put them aside, before you remove the HCU tray. Release the retainers holding the front lighting wire harness on the fender and disconnect the headlamp connector, next run the fog lamp, park lamp and side marker wire through the access fender well hole. Unbolt the fender to the cowl, HCU tray reinforcement bracket and grille and lift the fender away from the rest of the vehicle. During the installation, move all the essential parts and switch any damaged harness retainers. Set the fender flange on the car and secure the bolts connecting it to the grille, next put the front lighting wire harness into its retainers on the fender and lock it into place. Bolt on the fender to its bracket and the cowl and, when available, secure the body side molding to the HCU tray reinforcement bracket and cowl. Feed the screen of the fog lamp, park lamp and other wires forward via the hole in the fender well and seat the grommet before connecting the headlamp harness to the headlights. First, put the HCU tray in place, put the HCU on the support tray and install the bolts next. Afterward, install the EVAP canister, the horns and connect the horn wires, place the windshield washer reservoir in the correct spot and hook the vehicle's ground cable back to the battery's negative post.