How to Replace the Fuel Pressure Regulator Mounted Above the Rear Axle on Jeep Grand Cherokee?

This combination Fuel Filter/Fuel Pressure Regulator connects to the vehicle body beside the rear axle and before the front of the gas tank. First, let out pressure from the fuel system and then remove the negative battery cable at the battery. Raise the car and then clean the area around the fittings for the filter/regulator. Remove the fuel supply, fuel return and fuel pressure lines from the filter/regulator subassembly. Take out the two bolts holding the mount and pull out the filter/regulator. It's important to clear all fittings before you install the new filter/regulator. Set the O-ring into the corner of the fuel return fitting in the filter/regulator and apply a bit of clean engine oil to the O-rings. Set the filter/regulator in the body and fasten the two bolts as indicated in the construction manual. Join the three fittings and once again connect the negative battery cable to the battery. Turn on the car and watch for any leaks.

How to Remove and Install a Fuel Pressure Regulator on Jeep Grand Cherokee?

The place on the body where the unit of Fuel Filter/Fuel Pressure Regulator is usually above the rear axle and near the front of the fuel tank. To get rid of the problem, first square off the Fuel System Pressure Release Procedure and unplug the negative battery cable. Elevate your car and clean the area surrounding the three filter/regulator fittings. Remove the fuel source, return line and fuel pressure on the filter/regulator. Pull out the two mounting bolts and get rid of the filter/regulator. Make sure the inside of every fitting is spotless and clear of any dust or impurities, then put the O-ring into the fuel return fitting of the filter/regulator. Coat a couple of drops of clean engine oil on the O-rings, attach the filter, put the filter/regulator assembly to the body and use a torque wrench to secure the bolts at 3 Nm (30 in. Lbs.) tightness. Domain Cut Artsicle 3 Turn on the engine and look for any leaks.

OEM Jeep Grand Cherokee Fuel Pressure Regulator

Fuel Tank Pressure Regulator

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Fuel Pressure Regulators found

View related parts
Jeep Grand Cherokee Fuel Pressure Regulator Part Number: 53030001
$135.88 MSRP: $204.00
You Save: $68.12 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Regulator - Fuel Pressure; Fuel Injection Pressure Regulator; Fuel Pressure Damper; Regulator, Fuel Pressure; Regulator Fuel Pressure; Regulator, Pressure; Pressure Regulator
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1993-1996 Jeep Grand Cherokee | Base, Laredo, Limited, Orvis, SE | 6 Cyl 4.0 L GAS, 8 Cyl 5.2 L GAS
View related parts
Jeep Grand Cherokee Fuel Filter Part Number: 68193495AA
Product Specifications
- Other Name: Filter - Fuel; Fuel Pressure Regulator; Fuel Pressure Damper; Pressure Regulator
- Replaces: 52100281AD, 52100283AE, 52100283AG, 52100283AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2004 Jeep Grand Cherokee | Laredo, Limited, Overland, Special Edition, Sport | 4.0L L6, 4.7L V8, 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS
View related parts
Jeep Grand Cherokee Control Valve Part Number: 68248541AA
$487.77 MSRP: $716.00
You Save: $228.23 (32%)
Product Specifications
- Other Name: Regulator - Fuel Pressure; Regulator Fuel Pressure
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2014-2019 Jeep Grand Cherokee | High Altitude, Limited, Overland, Summit, Trailhawk | 6 Cyl 3.0 L DIESEL
View related parts
Jeep Grand Cherokee Fuel Filter Part Number: 68193494AA
Product Specifications
- Other Name: Filter - Fuel; Fuel Injection Pressure Regulator; Fuel Pressure Regulator; Fuel Pressure Damper; Pressure Regulator
- Replaces: 52100283AC, 52100283AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1999-2001 Jeep Grand Cherokee | Laredo, Limited | 4.0L L6, 4.7L V8, 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS

Jeep Grand Cherokee Fuel Pressure Regulator

Choose OEM Fuel Pressure Regulator that meet Jeep factory standards. Jeep designs and tests every component for precision and durability. Each Fuel Pressure Regulator follows strict manufacturing steps to lock in quality and fit. If your Jeep Grand Cherokee matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Grand Cherokee parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Jeep Grand Cherokee Fuel Pressure Regulator plays a very vital role of regulating the fuel pressure to the vehicle's fuel injection system which is an electronic type of system. This Fuel Pressure Regulator is known to be very reliable; it is usually screwed directly on the fuel rail and disposes of a spring and diaphragm mechanism which is expected to help to keep the requisite fuel pressure. As their jeep grand cherokee fuel pressure regulator modulates fuel flow in terms of the rate of vacuum, the car returns fuel to the fuel tank when idling while increasing the fuel pressure where there is high throttle demand. The operation of this functionality is essential to increase the efficiency such kind of vehicles and safety for different models of Jeep Grand Cherokee, providing a properly working engine depending on the conditions of the trip. Adjustable and static Fuel Pressure Regulator have been manufactured in different versions for Jeep Grand Cherokee with respect to the requirements of performance. It is worthwhile to point out that better quality regulators made from the billet aluminum provide improved adjustability of the air/fuel mixture, which is useful for street use, as well as high-level racing. The Jeep Grand Cherokee brand of automobiles is a exemplary model as far as innovation and quality is concerned and this is evident in the Fuel Pressure Regulator that is specially designed to make the Jeep Grand Cherokee a standout in the automotive market. In conclusion, the Jeep Grand Cherokee Fuel Pressure Regulator is one of the crucial parts that contribute to the vehicle's reliable performance thus are critical to any Jeep Grand Cherokee owners.

Jeep Grand Cherokee Fuel Pressure Regulator Parts and Q&A

Fuel Filter
68193495AA
Q: How to Replace the Fuel Pressure Regulator Mounted Above the Rear Axle on Jeep Grand Cherokee?
A:
This combination Fuel Filter/Fuel Pressure Regulator connects to the vehicle body beside the rear axle and before the front of the gas tank. First, let out pressure from the fuel system and then remove the negative battery cable at the battery. Raise the car and then clean the area around the fittings for the filter/regulator. Remove the fuel supply, fuel return and fuel pressure lines from the filter/regulator subassembly. Take out the two bolts holding the mount and pull out the filter/regulator. It's important to clear all fittings before you install the new filter/regulator. Set the O-ring into the corner of the fuel return fitting in the filter/regulator and apply a bit of clean engine oil to the O-rings. Set the filter/regulator in the body and fasten the two bolts as indicated in the construction manual. Join the three fittings and once again connect the negative battery cable to the battery. Turn on the car and watch for any leaks.
Fuel Filter
68193494AA
Q: How to Remove and Install a Fuel Pressure Regulator on Jeep Grand Cherokee?
A:
The place on the body where the unit of Fuel Filter/Fuel Pressure Regulator is usually above the rear axle and near the front of the Fuel Tank. To get rid of the problem, first square off the Fuel System Pressure Release Procedure and unplug the negative Battery Cable. Elevate your car and clean the area surrounding the three filter/regulator fittings. Remove the fuel source, return line and fuel pressure on the filter/regulator. Pull out the two mounting bolts and get rid of the filter/regulator. Make sure the inside of every fitting is spotless and clear of any dust or impurities, then put the O-ring into the fuel return fitting of the filter/regulator. Coat a couple of drops of clean engine oil on the O-rings, attach the filter, put the filter/regulator assembly to the body and use a torque wrench to secure the bolts at 3 Nm (30 in. Lbs.) tightness. Domain Cut Artsicle 3 Turn on the engine and look for any leaks.