How to Maintain and Repair a Steering Shaft on Jeep Grand Cherokee?

The first step is to use a swivel socket and long extension on an adjustable handle to remove the lower coupling pinch bolt on the intermediate steering shaft. Raise the vehicle, then take off the left inner fender well to be able to access the intermediate shaft. Take out the nuts from the bearing on the short shaft and then disconnect the bearing bracket from the frame. Remove the intermediate shaft mounting nuts on the bulkhead, getting to the lower nut from the inner fender well and reaching the upper nut from above close to the master cylinder. Release the hush panel from the locker, followed by removing the access door for the columns and pulling out the pinch bolt at the coupling above the column. Gently pull the shaft over the lines and up towards the master cylinder, then remove it from the top there. Slide the shaft onto the column from the top, by the brake master cylinder and move it forward and up, installing a new pinch bolt at the upper coupler. Put the access cover for the column and hush panel back in place, attaching the intermediate shaft nut mounting nuts to the bulkhead by reaching into the inner fender well for the bottom bolt and from the top near the master cylinder for the top one. Slide the intermediate shaft bearing nuts on the bracket, secure the bearing bracket to the frame, fit the left inner fender well, lower the car and install the bolt using a long extension and a swivel socket.

OEM Jeep Grand Cherokee Steering Shaft

Steering Stem Shaft

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

10 Steering Shafts found

View related parts
Jeep Grand Cherokee Intermediate Shaft Part Number: 5057539AH
$168.82 MSRP: $254.00
You Save: $85.18 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft - Steering Column Intermediat; Steering Shaft; Intermed Shaft; Shaft Steering Column Intermediate
- Replaces: 5057539AF, 5057539AC, 5057539AD, 5057539AE, 5057539AG
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2018 Jeep Grand Cherokee | 75th Anniversary, Altitude, High Altitude, Laredo, Limited, Overland, Overland Summit, SRT, SRT8, Summit, Trackhawk, Trailhawk | 3.0L V6, 3.6L V6, 5.7L V8, 6 Cyl 3.0 L DIESEL, 6 Cyl 3.6 L FLEX, 6.2L V8, 6.4L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS
View related parts
Jeep Grand Cherokee Intermediate Shaft Part Number: 68245552AD
$258.32 MSRP: $384.00
You Save: $125.68 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft - Steering Column Intermediat; Steering Shaft; Intermed Shaft; Shaft Steering Column Intermediate
- Replaces: 68245552AB, 68245552AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2019-2022 Jeep Grand Cherokee | 4xe, 80th Anniversary, Altitude, High Altitude, Laredo, Laredo E, Laredo X, Limited, Limited X, Overland, SRT, Summit, Summit Reserve, Trackhawk, Trailhawk, Upland | 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV), 6 Cyl 3.0 L DIESEL, 6 Cyl 3.6 L FLEX, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS
- 2016-2017 Jeep Grand Cherokee | 3.0L V6, 3.6L V6, 5.7L V8
View related parts
Jeep Grand Cherokee Intermediate Shaft Part Number: 68438450AB
$63.56 MSRP: $95.00
You Save: $31.44 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft - Steering Column Intermediat; Steering Shaft; Intermed Shaft
- Replaced by: 68438450AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2022-2025 Jeep Grand Cherokee | 30th Anniversary 4xe, 4xe, Altitude, Altitude X, Anniversary Edition 4xe, Laredo, Laredo X, Limited, Overland, Summit, Summit Reserve, Trailhawk | 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV), 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS
View related parts
Jeep Grand Cherokee Intermediate Shaft Part Number: 68408233AA
$77.42 MSRP: $170.00
You Save: $92.58 (55%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft - Steering Column Intermediat; Steering Shaft; Intermed Shaft
- Replaced by: 68408233AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2022-2025 Jeep Grand Cherokee | 30th Anniversary 4xe, 4xe, Altitude, Altitude X, Anniversary Edition 4xe, Laredo, Laredo X, Limited, Overland, Summit, Summit Reserve, Trailhawk | 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV), 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS
View related parts
Jeep Grand Cherokee Intermediate Shaft Part Number: 5057494AA
$601.22 MSRP: $877.00
You Save: $275.78 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft - Steering Column Intermediat; Steering Shaft; Intermed Shaft; Shaft Steering Column Intermediate
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2010 Jeep Grand Cherokee | Laredo, Limited, Overland, SRT8 | 6 Cyl 3.0 L DIESEL, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
Jeep Grand Cherokee Intermediate Shaft Assembly Part Number: 5066597AA
Product Specifications
- Other Name: Shaft - Intermediate; Steering Shaft; Intermed Shaft
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1999-2000 Jeep Grand Cherokee | Laredo, Limited | 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS
View related parts
Jeep Grand Cherokee Intermediate Shaft Assembly Part Number: 52088253AG
Product Specifications
- Other Name: Shaft - Intermediate; Steering Shaft; Intermed Shaft; Shaft Intermediate
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2004 Jeep Grand Cherokee | Laredo, Limited, Overland, Special Edition, Sport | 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS
View related parts
Jeep Grand Cherokee Intermediate Shaft Part Number: 55197266AA
Product Specifications
- Other Name: Shaft - Intermediate; Steering Shaft; Intermed Shaft; Shaft Intermediate
- Replaces: 55197223AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2007 Jeep Grand Cherokee | 65th Anniversary Edition, Laredo, Limited, Overland, SRT8 | 3.0L V6, 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.0 L DIESEL, 6 Cyl 3.7 L GAS, 6.1L V8, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
Jeep Grand Cherokee Intermediate Shaft Assembly Part Number: 4882372
Product Specifications
- Other Name: Steering Shaft; Lower Shaft
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1993-1995 Jeep Grand Cherokee | Base, Laredo, Limited, Orvis, SE | 6 Cyl 4.0 L GAS, 8 Cyl 5.2 L GAS
View related parts
Jeep Grand Cherokee Intermediate Shaft Assembly Part Number: 52079050AB
Product Specifications
- Other Name: Shaft - Steering Column; Steering Shaft; Lower Shaft
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1995-1998 Jeep Grand Cherokee | 5.9 Limited, Laredo, Limited, Orvis, SE, TSi | 6 Cyl 4.0 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS

Jeep Grand Cherokee Steering Shaft

Choose OEM Steering Shaft that meet Jeep factory standards. Jeep designs and tests every component for precision and durability. Each Steering Shaft follows strict manufacturing steps to lock in quality and fit. If your Jeep Grand Cherokee matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Grand Cherokee parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Jeep Grand Cherokee Steering Shaft is an important one that helps in identifying and improving the issues with Jeep Grand Cherokee. This specific auto part referred to as the Steering Shaft is responsible for transferring input commands from the steering wheel to the wheels; if it provides efficient and sensitive response to the commands issued at the steering wheel, it enhances both efficiency and safety of the vehicle. Priced in different ways like intermediate, upper intermediate, and lower Steering Shafts, every part is made with high-quality material to ensure the part's lastingness. The Jeep Grand Cherokee is a luxury SUV that has a unibody chassis and has incorporated it with top level of engineering and therefore Steering Shaft stands out in the Jeep Grand Cherokee market. It is also significant to check the Steering Shaft frequently; any complications that include a complication in the steering or unusual sounds should be a potential indication that it is time to have the jeep grand cherokee Steering Shaft maintained hence continuing to give the user a secure ride. Adaptability to various Grand Cherokee models extend the positive impact of these devices to Jeep consumers across the company's base. The Jeep Grand Cherokee Steering Shaft plays an active role not only the jeep's ability to handle roads but more specifically in how such a vehicle can be of optimal use to the driver and co-passengers, making it a valuable and crucial part of jeeps. As for the unique and state-of-the-art Steering Shaft, it once again proves that Jeep simply does not produce low-quality vehicles - and the Grand Cherokee as a true embodiment of a luxury SUV on the market.

Jeep Grand Cherokee Steering Shaft Parts and Q&A

Intermediate Shaft
55197266AA
Q: How to Maintain and Repair a Steering Shaft on Jeep Grand Cherokee?
A:
The first step is to use a swivel socket and long extension on an adjustable handle to remove the lower coupling pinch bolt on the intermediate steering shaft. Raise the vehicle, then take off the left inner fender well to be able to access the intermediate shaft. Take out the nuts from the bearing on the short shaft and then disconnect the bearing bracket from the frame. Remove the intermediate shaft mounting nuts on the bulkhead, getting to the lower nut from the inner fender well and reaching the upper nut from above close to the master cylinder. Release the hush panel from the locker, followed by removing the access door for the columns and pulling out the pinch bolt at the coupling above the column. Gently pull the shaft over the lines and up towards the master cylinder, then remove it from the top there. Slide the shaft onto the column from the top, by the brake master cylinder and move it forward and up, installing a new pinch bolt at the upper coupler. Put the access cover for the column and hush panel back in place, attaching the intermediate shaft nut mounting nuts to the bulkhead by reaching into the inner fender well for the bottom bolt and from the top near the master cylinder for the top one. Slide the intermediate shaft bearing nuts on the bracket, secure the bearing bracket to the frame, fit the left inner fender well, lower the car and install the bolt using a long extension and a swivel socket.