How to Service and Repair a Throttle Body on Jeep Grand Cherokee?

Before servicing the throttle body, take out the air cleaner duct and air resonator box at the throttle body. Unplug the electrical connections from the throttle body at the MAP sensor, IAC motor and TPS. Get rid of the throttle body mounting bolts, then detach the throttle body from the gauge. To install the throttle body, first clean the surfaces of the throttle body and the intake manifold, install a new gasket and attach them together with the new gasket between them. Hold the cooker down with the bolts and tighten them to 11 Nm (100 in. Lbs.) torque. Install all the cables and electric connections and then put in the air duct and air box at the throttle body.

How to Remove and Install a Throttle Body Without Altering the Factory Set Screw for Idle Speed on Jeep Grand Cherokee?

There is a factory adjusted screw inside the throttle body that prevents the throttle plate from moving beyond its boundary and adjusting this screw can disturb the engine's idle speed. Remove the air cleaner duct and the air resonator box from the throttle body. Then detach the electrical wires from the MAP sensor, IAC motor and TPS. Now, first disconnect all control wires from the throttle body lever arm, then remove the four bolts holding the throttle body to the manifold and finally take off the throttle body. Remember to take off the old gasket as you remove it. To install, first wipe the mating zone of the throttle body and the intake manifold, then put a new throttle body-to-intake manifold gasket in place and fit the throttle body over the intake manifold. Place all the bolts and after tightening them to 11 Nm (100 in. lbs.), install the control cables and connectors and then assemble the air duct and air box nearby the throttle body.

OEM Jeep Grand Cherokee Throttle Body

Fuel Injection Throttle Body

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

16 Throttle Bodies found

View related parts
Jeep Grand Cherokee Throttle Body Part Number: 53032837AB
$316.11 MSRP: $465.00
You Save: $148.89 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Fuel Injector Electronic Throttle Body Assembly; Fuel Injection Throttle Body Assembly; Electronic Throttle Body Module
- Replaces: 53032837AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2009 Jeep Grand Cherokee | Laredo, Limited, Overland | 4.7L V8, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
Jeep Grand Cherokee Throttle Body Part Number: 53034251AD
$232.58 MSRP: $343.00
You Save: $110.42 (33%)
ADD TO CART
Product Specifications
- Other Name: Fuel Injector Electronic Throttle Body Assembly; Fuel Injection Throttle Body Assembly
- Replaces: 53034251AB, 53034251AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2012-2022 Jeep Grand Cherokee | High Altitude, Limited, Limited X, Overland, SRT, SRT8, Summit, Summit Reserve, Trailhawk | 5.7L V8, 6.4L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.4 L GAS
View related parts
Jeep Grand Cherokee Throttle Body Part Number: 4591847AC
$308.30 MSRP: $471.00
You Save: $162.70 (35%)
ADD TO CART
Product Specifications
- Other Name: Fuel Injector Electronic Throttle Body Assembly; Fuel Injection Throttle Body Assembly
- Replaces: 68060354AA, 4591847AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2014 Jeep Grand Cherokee | Laredo, Limited, Overland, Overland Summit, SRT8, Summit | 5.7L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
Jeep Grand Cherokee Throttle Body Part Number: 4861661AB
$375.56 MSRP: $552.00
You Save: $176.44 (32%)
ADD TO CART
Product Specifications
- Other Name: Throttle; Fuel Injector Electronic Throttle Body Assembly; Fuel Injection Throttle Body.
- Replaces: 4861661AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2010 Jeep Grand Cherokee | Laredo, Limited | 3.7L V6, 6 Cyl 3.7 L GAS
View related parts
Jeep Grand Cherokee Throttle Body Part Number: 5184349AF
$435.37 MSRP: $662.00
You Save: $226.63 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Fuel Injector Electronic Throttle Body Assembly; Fuel Injection Throttle Body Assembly; Electronic Throttle Body Module
- Replaces: 5184349AE, 5184349AC, 5184349AD, 5184349AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2024 Jeep Grand Cherokee | 75th Anniversary, Altitude, Altitude X, High Altitude, Laredo, Laredo E, Laredo X, Limited, Limited X, Overland, Overland Summit, Summit, Summit Reserve, Trailhawk, Upland | 3.6L V6, 6 Cyl 3.6 L FLEX
View related parts
Jeep Grand Cherokee Throttle Body Part Number: 68490035AA
$524.15 MSRP: $708.00
You Save: $183.85 (26%)
ADD TO CART
Product Specifications
- Other Name: Throttle
- Replaces: 68147613AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2021 Jeep Grand Cherokee | High Altitude, Limited, Overland, Summit, Trailhawk | 3.0L V6, 6 Cyl 3.0 L DIESEL
View related parts
Jeep Grand Cherokee Throttle Body Part Number: 5114397AA
Product Specifications
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2007 Jeep Grand Cherokee | 65th Anniversary Edition, Laredo, Limited | 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
View related parts
Jeep Grand Cherokee Throttle Body Part Number: 5139073AB
Product Specifications
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2006 Jeep Grand Cherokee | 65th Anniversary Edition, Laredo | 6 Cyl 3.7 L GAS
View related parts
Jeep Grand Cherokee Throttle Body Part Number: 68428448AB
$239.06 MSRP: $359.00
You Save: $119.94 (34%)
Product Specifications
- Other Name: Throttle Body Etc
- Replaces: 68428448AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2022-2024 Jeep Grand Cherokee | 30th Anniversary 4xe, 4xe | 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV)
View related parts
Jeep Grand Cherokee Throttle Body Part Number: 68184386AE
$416.78 MSRP: $612.00
You Save: $195.22 (32%)
Product Specifications
- Other Name: Throttle
- Replaces: 68184386AA, 68184386AD, 68184386AC, 68184386AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2018-2021 Jeep Grand Cherokee | Trackhawk | 6.2L V8, 8 Cyl 6.2 L GAS
View related parts
Jeep Grand Cherokee Throttle Body Part Number: 53032023AC
Product Specifications
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1997-2001 Jeep Grand Cherokee | Laredo, Limited, Orvis, TSi | 6 Cyl 4.0 L GAS
View related parts
Jeep Grand Cherokee Throttle Body Part Number: 53013290AA
Product Specifications
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2002-2004 Jeep Grand Cherokee | Laredo, Limited, Special Edition, Sport | 6 Cyl 4.0 L GAS
View related parts
Jeep Grand Cherokee Throttle Body Part Number: 5016748AA
Product Specifications
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1999-2000 Jeep Grand Cherokee | Laredo, Limited | 8 Cyl 4.7 L GAS
View related parts
Jeep Grand Cherokee Throttle Body Part Number: 4856107
Product Specifications
- Other Name: Throttle Body, w/A.I.S. and T.P.S.; Throttle Body, W/A.I.S. And T.P.S.
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1993-1996 Jeep Grand Cherokee | Base, Laredo, Limited, Orvis, SE | 6 Cyl 4.0 L GAS
View related parts
Jeep Grand Cherokee Throttle Body Part Number: 53030807AB
Product Specifications
- Replaced by: 53032691AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1997-1998 Jeep Grand Cherokee | 5.9 Limited, Laredo, Limited, Orvis, TSi | 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
Jeep Grand Cherokee Throttle Body Part Number: 53013163AD
Product Specifications
- Replaces: 53013163AC, 53013163AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2004 Jeep Grand Cherokee | Laredo, Limited, Overland, Special Edition, Sport | 4.7L V8, 8 Cyl 4.7 L GAS

Jeep Grand Cherokee Throttle Body

Choose OEM Throttle Body that meet Jeep factory standards. Jeep designs and tests every component for precision and durability. Each Throttle Body follows strict manufacturing steps to lock in quality and fit. If your Jeep Grand Cherokee matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Grand Cherokee parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Throttle Body in Jeep Grand Cherokee vehicles is as a crucial component which controls the air that is allowed into then Jeep's engine, and thus, an important part of the fuel injection systems in vehicles. Located upstream or downstream of the air cleaner and before the intake manifold it has a butterfly valve that vary depending on the accelerator pedal. When the pedal is pushed more, it increases the air coming in through the valve while the sensors relays the information to the PCM in order to adjust the amount of fuel being supplied to the engine. Through the many years, there has been change of fuel injection systems from Throttle Body Injection (TBI) system to the more sophisticated multi-port fuel injection system in Jeep Grand Cherokee models. Present day throttle bodies incorporate Electronic Throttle Control (ETC), this is a substitute for mechanical connection of the accelerator pedal with the throttle plates through electronic signals to maintain greater sensitivity and interface with necessary safety components. High-Mileage Throttle Bodies are usually quite dependable, however, the expressed components may need occasional cleaning or replacement to remove the accumulated deposits which often results in the Throttle Body's degradation and which might affect the performance of Jeep Grand Cherokee Automobiles.

Jeep Grand Cherokee Throttle Body Parts and Q&A

Throttle Body
53013163AD
Q: How to Service and Repair a Throttle Body on Jeep Grand Cherokee?
A:
Before servicing the throttle body, take out the air cleaner duct and air resonator box at the throttle body. Unplug the electrical connections from the throttle body at the MAP Sensor, IAC motor and TPS. Get rid of the throttle body mounting bolts, then detach the throttle body from the gauge. To install the throttle body, first clean the surfaces of the throttle body and the Intake Manifold, install a new gasket and attach them together with the new gasket between them. Hold the cooker down with the bolts and tighten them to 11 Nm (100 in. Lbs.) torque. Install all the cables and electric connections and then put in the Air Duct and air box at the throttle body.
Throttle Body
53032023AC
Q: How to Remove and Install a Throttle Body Without Altering the Factory Set Screw for Idle Speed on Jeep Grand Cherokee?
A:
There is a factory adjusted screw inside the throttle body that prevents the throttle plate from moving beyond its boundary and adjusting this screw can disturb the engine's idle speed. Remove the air cleaner duct and the air resonator box from the throttle body. Then detach the electrical wires from the MAP Sensor, IAC motor and TPS. Now, first disconnect all control wires from the throttle body lever arm, then remove the four bolts holding the throttle body to the manifold and finally take off the throttle body. Remember to take off the old gasket as you remove it. To install, first wipe the mating zone of the throttle body and the Intake Manifold, then put a new throttle body-to-intake manifold gasket in place and fit the throttle body over the intake manifold. Place all the bolts and after tightening them to 11 Nm (100 in. lbs.), install the control cables and connectors and then assemble the Air Duct and air box nearby the throttle body.