How to Install an A/C System Valve Core on Jeep Patriot?

Before you install the service port valve core, coat it with suitable refrigerant oil for the vehicle's A/C compressor. Remove either the tape or the plug from inside the service port (2). Be sure the valve core is inserted far enough in the A/C port so that sealing occurs and no damage is done, avoiding refrigerant loss during uncoupling charge adapters. Install and tighten the valve core onto the service port(s) using a Schrader-type valve core tool. Be sure not to start the engine until the vacuum pump is off and there is not a vacuum in the A/C system. Following installation, pull the refrigerant out of the system and then refill the system. When the work is done, replace the protective cap (1) to prevent contamination of the refrigerant system and remember to put it back after every service is finished.

How to Remove an A/C System Valve Core on Jeep Patriot?

Before you can remove the core from the service port valve, make sure to remove the protective cap on the service port. After that, gather the refrigerant that is still in the system. Take the Schrader core tool and remove the valve core from the tire's service port. After you have sorted everything out, seal the opened service port with a plug or tape.

OEM Jeep Patriot A/C System Valve Core

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 A/C System Valve Cores found

View related parts
Jeep Patriot Check Valve Part Number: 5189373AA
$25.05 MSRP: $31.95
You Save: $6.90 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve - A/C Line; High & Low Side Charging Adapters; Service Valve Core.; Service Valve; Line Valve; Liquid Line Valve; Valve Core A/C Line
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2008 Jeep Patriot | Limited, Sport | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Jeep Patriot Check Valve Part Number: 68049091AA
$36.99 MSRP: $74.85
You Save: $37.86 (51%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve - A/C Line; High & Low Side Charging Adapters; Service Valve Core.; Fill Valve; Line Valve; Liquid Line Valve; Cap; Valve Core A/C Line
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009 Jeep Patriot | Limited, Sport | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Jeep Patriot Pressure Valve Part Number: 5189365AB
Product Specifications
- Other Name: Valve - A/C Line; A/C Compressor Cut-Out Switch; A/C System Valve Core; Liquid Line Valve; Valve; Valve Core A/C Line
- Replaces: 5189365AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2009 Jeep Patriot | Limited, Sport | 2.0L L4, 2.4L L4, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS

Jeep Patriot A/C System Valve Core

Choose OEM A/C System Valve Core that meet Jeep factory standards. Jeep designs and tests every component for precision and durability. Each A/C System Valve Core follows strict manufacturing steps to lock in quality and fit. If your Jeep Patriot matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Patriot parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

As a necessary component under the Jeep Patriot A/C System the rear Valve Core ensures dependable air conditioning performance within this Jeep model. As a single-direction valve the A/C System Valve Core enables system entry for the refrigerant but stops it from leaking out which results in improved performance and safety of the Jeep Patriot's climate control. This A/C System Valve Core provides support to all Jeep Patriot models and helps preserve their air conditioning efficiency from start to finish. The quality design of the A/C System Valve Core enables Jeep owners to easily reach and service the unit as well as recharge their refrigerant supply for better user satisfaction. The Jeep Patriot stands out due to its extended lifespan along with limited modifications throughout its existence showing that the A/C System Valve Core represents one of its high-quality components. The manufacturer Patriot's functionality depends on this valve core while it ensures the comfort level of the vehicle during every driving session. The optimal features which distinguish the A/C System Valve Core in the market include its durable design together with its capacity to work with various the brand Patriot vehicles. Performance reliability of the car gets improved due to efficient air conditioning system operation which makes the A/C System Valve Core an essential engineering component for the automaker model vehicles.

Jeep Patriot A/C System Valve Core Parts and Q&A

Pressure Valve
5189365AB
Q: How to Install an A/C System Valve Core on Jeep Patriot?
A:
Before you install the service port valve core, coat it with suitable refrigerant oil for the vehicle's A/C compressor. Remove either the tape or the plug from inside the service port (2). Be sure the valve core is inserted far enough in the A/C port so that sealing occurs and no damage is done, avoiding refrigerant loss during uncoupling charge adapters. Install and tighten the valve core onto the service port(s) using a Schrader-type valve core tool. Be sure not to start the engine until the vacuum pump is off and there is not a vacuum in the A/C system. Following installation, pull the refrigerant out of the system and then refill the system. When the work is done, replace the protective cap (1) to prevent contamination of the refrigerant system and remember to put it back after every service is finished.
Check Valve
68049091AA
Q: How to Remove an A/C System Valve Core on Jeep Patriot?
A:
Before you can remove the core from the service port valve, make sure to remove the protective cap on the service port. After that, gather the refrigerant that is still in the system. Take the Schrader core tool and remove the valve core from the tire's service port. After you have sorted everything out, seal the opened service port with a plug or tape.