How to Install a Seat Heater Switch for the 2nd Row on Jeep Grand Cherokee?

After checking the retaining tabs have been fully inserted into the rear trim panel of the floor console, press to install the 2nd row heated seat switch assembly. In case they are available, link the 2nd row heated seat switches, 115 Volt power outlet and auxiliary audio jacks to the trim panel. Set the trim panel next to the console and lift the bottom tabs into their places. Then lean the top edge of the trim panel forward and press gently to fasten all the retaining clips. After that, connect the battery ground to the negative terminal and try the 2nd row heated seat system.

How to Maintain the Seat Heater Switch for the Driver's Seat on Jeep Liberty?

Before working on the driver heated seat switch, disconnect and cut off the negative battery cable. Lift the seat cushion side shield you need to remove and unplug the heated seat switch connector by pressing and pulling apart. Gently back and forth, rock the switch underneath, breaking its link with the mounting location. To fit the switch, first rock it back and forth as you guide it onto the mount. Once the switch is there, plug in the heated seat switch electrical connector. Insert the proper side shield on the seat cushion and bolt it to place before connecting the negative battery cable.

OEM Jeep Seat Heater Switch

Seat Heater Level Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

9 Seat Heater Switches found

View related parts
Jeep Seat Heat Switch, Passenger Side Part Number: 4602872AB
$19.33 MSRP: $34.20
You Save: $14.87 (44%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch - Heated Seat; Seat Heater Switch, Right; Switch; Switch Heated Seat; Seat Heater Switch
- Position: Passenger Side
- Replaces: 4602872AA
Fits the following Jeep Models:
- Commander | 2009-2010 | 3.7L V6, 4.7L V8, 5.7L V8
- Grand Cherokee | 2008-2016 | 75th Anniversary, Laredo, Limited, Overland, Overland Summit, SRT, SRT8, Summit | 3.0L V6, 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.0 L DIESEL, 6 Cyl 3.6 L FLEX, 6 Cyl 3.7 L GAS, 6.1L V8, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS, 8 Cyl 6.4 L GAS
View related parts
Jeep Seat Heat Switch, Driver Side Part Number: 4602970AB
$28.52 MSRP: $40.40
You Save: $11.88 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch - Heated Seat; Seat Heater Switch, Left; Switch; Switch Heated Seat; Seat Heater Switch
- Position: Driver Side
Fits the following Jeep Models:
- Grand Cherokee | 2011-2016 | 75th Anniversary, Laredo, Limited, Overland, Overland Summit, SRT, SRT8, Summit | 6 Cyl 3.0 L DIESEL, 6 Cyl 3.6 L FLEX, 8 Cyl 5.7 L GAS, 8 Cyl 6.4 L GAS
View related parts
Jeep Switch Part Number: 5GW44DX9AC
$34.85 MSRP: $40.00
You Save: $5.15 (13%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch - Heated Seat; Seat Heater Switch; Power Seat Switch; Switch Heated Seat
- Replaces: 5GW44DX9AB
Fits the following Jeep Models:
- Liberty | 2002-2007 | 65th Anniversary Edition, Limited, Renegade, Rocky Mountain Edition, Sport | 2.8L L4, 3.7L V6, 4 Cyl 2.4 L GAS, 4 Cyl 2.8 L DIESEL, 6 Cyl 3.7 L GAS
View related parts
Jeep Seat Heat Switch, Front Passenger Side Part Number: 68059873AC
$28.69 MSRP: $42.80
You Save: $14.11 (33%)
ADD TO CART
Product Specifications
- Other Name: Switch - Heated Seat; Seat Heater Switch, Front Left, Front Right, Left; Switch Heated Seat Rear Left
- Position: Front Passenger Side
- Replaces: 68059873AB
Fits the following Jeep Models:
- Grand Cherokee | 2014-2022 | 4xe, Altitude, High Altitude, Laredo, Laredo E, Laredo X, Limited, Limited X, Overland, SRT, Summit, Summit Reserve, Trackhawk, Trailhawk, Upland | 3.0L V6, 3.6L V6, 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV), 5.7L V8, 6 Cyl 3.0 L DIESEL, 6 Cyl 3.6 L FLEX, 6.2L V8, 6.4L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS
View related parts
Jeep Switch Part Number: 56033017AB
$60.49 MSRP: $76.68
You Save: $16.19 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch - Heated Seat; Seat Heater Switch; Switch Heated Seat
Fits the following Jeep Models:
- Grand Cherokee | 1999-2004 | Laredo, Limited, Overland, Special Edition, Sport | 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS
View related parts
Jeep Switch Part Number: 56033019AB
Product Specifications
- Other Name: Switch - Heated Seat; Seat Heater Switch; Switch Heated Seat
Fits the following Jeep Models:
- Grand Cherokee | 1999-2004 | Laredo, Limited, Overland, Special Edition, Sport | 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS
View related parts
Jeep Seat Heat Switch, Driver Side Part Number: 4602970AA
Product Specifications
- Other Name: Switch - Heated Seat; Seat Heater Switch, Left; Switch; Switch Heated Seat; Seat Heater Switch
- Position: Driver Side
Fits the following Jeep Models:
- Grand Cherokee | 2008-2010 | Laredo, Limited, Overland, SRT8 | 6 Cyl 3.0 L DIESEL, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
Jeep Seat Heat Switch, Passenger Side Part Number: 68059874AC
Product Specifications
- Other Name: Switch - Heated Seat; Seat Heater Switch, Right; Switch Heated Seat Rear Right
- Position: Passenger Side
- Replaces: 68059874AB
Fits the following Jeep Models:
- Grand Cherokee | 2014-2022 | 4xe, Altitude, High Altitude, Laredo, Laredo E, Laredo X, Limited, Limited X, Overland, SRT, Summit, Summit Reserve, Trackhawk, Trailhawk, Upland | 3.0L V6, 3.6L V6, 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV), 5.7L V8, 6 Cyl 3.0 L DIESEL, 6 Cyl 3.6 L FLEX, 6.2L V8, 6.4L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS
View related parts
Jeep Seat Switch Part Number: 4602840AF
Product Specifications
- Other Name: Switch - Heated Seat; Seat Heater Switch; Seat Heat Switch; Switch; Switch Heated Seat
- Replaces: 4602840AD, 4602840AC, 4602840AE
Fits the following Jeep Models:
- Commander | 2008-2010 | Limited, Overland, Sport | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
- Grand Cherokee | 2008-2010 | Laredo, Limited, Overland, SRT8 | 3.0L V6, 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.0 L DIESEL, 6 Cyl 3.7 L GAS, 6.1L V8, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS

Jeep Seat Heater Switch

OEM parts sourced directly from Jeep deliver superior quality, long lasting strength, and a precise fit you can trust. Each item goes through strict quality checks to ensure safety, toughness, and performance that matches your factory equipment. At JeepPartsDeal online shop, you'll get top-quality, budget-friendly OEM Jeep Seat Heater Switch for your vehicle. We focus on giving you a high standard without pushing up the price. Our full selection of genuine factory products comes backed by the original manufacturer's warranty. You'll love our fast delivery, seamless shopping experience, and convenient return policy, saving you all the hassle.

Jeep Seat Heater Switch Parts and Q&A

Seat Heat Switch, Passenger Side
4602872AB
Q: How to Install a Seat Heater Switch for the 2nd Row on Jeep Grand Cherokee?
A:
After checking the retaining tabs have been fully inserted into the rear trim panel of the floor console, press to install the 2nd row heated seat switch assembly. In case they are available, link the 2nd row heated seat switches, 115 Volt power outlet and auxiliary audio jacks to the trim panel. Set the trim panel next to the console and lift the bottom tabs into their places. Then lean the top edge of the trim panel forward and press gently to fasten all the retaining clips. After that, connect the battery ground to the negative terminal and try the 2nd row heated seat system.
Switch
5GW44DX9AC
Q: How to Maintain the Seat Heater Switch for the Driver's Seat on Jeep Liberty?
A:
Before working on the driver heated seat switch, disconnect and cut off the negative battery cable. Lift the seat cushion side shield you need to remove and unplug the heated seat switch connector by pressing and pulling apart. Gently back and forth, rock the switch underneath, breaking its link with the mounting location. To fit the switch, first rock it back and forth as you guide it onto the mount. Once the switch is there, plug in the heated seat switch electrical connector. Insert the proper side shield on the seat cushion and bolt it to place before connecting the negative battery cable.