JeepParts
My Garage
My Account
Cart
OEM 2000 Dodge Ram 2500 Harmonic Balancer
Engine Harmonic Balancer- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
4 Harmonic Balancers found
2000 Dodge Ram 2500 Vibration Damper Part Number: 53020776AB
$254.03 MSRP: $292.00You Save: $37.97 (13%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Damper - Crankshaft; Harmonic Balancer Puller; Harmonic Balancer; Crankshaft Damper; Pulley
- Item Weight: 10.10 Pounds
- Item Dimensions: 5.9 x 10.4 x 10.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53020776AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2000 Dodge Ram 2500 Vibration Damper Part Number: 53021284AA
Product Specifications- Other Name: Damper - Crankshaft; Engine Harmonic Balancer; Pulley; Damper Crankshaft; Harmonic Balancer
- Item Weight: 12.20 Pounds
- Item Dimensions: 10.5 x 8.1 x 7.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53021284AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2000 Dodge Ram 2500 Crankshaft Pulley Part Number: 53010222
Product Specifications- Other Name: Pulley - Crankshaft; Engine Crankshaft; Serpentine Belt Kit; Harmonic Balancer; Idler Pulley; Drive Pulley; Serpentine Idler Pulley; Pulley; Pulley Crankshaft; Pulley, Drive
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53010222
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2000 Dodge Ram 2500 Vibration Damper Part Number: 5011800AA
Product Specifications- Other Name: Damper - Crankshaft; Harmonic Balancer; Pulley; Damper Crankshaft
- Item Weight: 15.00 Pounds
- Item Dimensions: 12.0 x 11.6 x 2.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5011800AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2000 Dodge Ram 2500 Harmonic Balancer Parts and Q&A
- Q: How to Service and Repair a Harmonic Balancer and Crankshaft Pulley on 2000 Dodge Ram 2500?A: Disconnect the battery negative cable as the very first step to work on the harmonic balancer and crankshaft pulley. The next step is to remove the cooling system fan, the cooling fan shroud and then take out the accessory drive belt. After that, remove the vibration damper bolt and the accompanying washer from the crankshaft. Slide Special Tool 8513 into the crankshaft and continue by attaching Special Tool 1026 Three Jaw Puller to the vibration damper. Make sure to remove all contaminants around the crankshaft nose and in the bore of the vibration damper during installation to avoid serious problems. Attach the vibration damper to the crankshaft, then use the installing tool from Set C-3688 to press the damper tightly onto the shaft. Place the crankshaft bolt and washer onto the engine, tighten the bolt to 244 Nm (180 ft. lbs.) torque. Slip the new accessory drive belt on and place the fan shroud, attaching everything with the bolts and torquing the retainer bolts to 11 Nm (95 in. lbs.). After that, attach the cooling fan and put back the battery negative cable.
Related 2000 Dodge Ram 2500 Parts
2000 Dodge Ram 2500 Oil Filter
2000 Dodge Ram 2500 Camshaft
2000 Dodge Ram 2500 Camshaft Seal
2000 Dodge Ram 2500 Crankshaft
2000 Dodge Ram 2500 Crankshaft Seal
2000 Dodge Ram 2500 Crankshaft Thrust Washer Set
2000 Dodge Ram 2500 Engine Mount
2000 Dodge Ram 2500 Lash Adjuster
2000 Dodge Ram 2500 Oil Pan
2000 Dodge Ram 2500 Oil Pan Gasket
2000 Dodge Ram 2500 Rocker Arm Pivot
2000 Dodge Ram 2500 Valve Stem Seal