How to Remove and Install a Power Steering Pressure Switch on 2000 Jeep Cherokee?

In order to take off power steering pressure switch, a container should be placed under the electrical connector and the connector should be disconnected. To avoid bending of the switch, remove it using a backup wrench. Connect the new switch, screw up to 14-22 Nm, reconnect electrical connector and verify the fluid level by adding some.

OEM 2000 Jeep Cherokee Power Steering Pressure Switch

Power Steering Oil Pressure Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Power Steering Pressure Switch found

View related parts
2000 Jeep Cherokee Pressure Switch, Front Part Number: 56027906AC
Product Specifications
- Other Name: Switch - Power Steering; Power Steering Pressure Switch, Front; Switch
- Position: Front
- Item Weight: 0.50 Pounds
- Item Dimensions: 2.9 x 1.2 x 1.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56027906AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Jeep Cherokee Submodels:
- SE | 4 Cyl 2.5 L GAS

2000 Jeep Cherokee Power Steering Pressure Switch Parts and Q&A

Q: How to Remove and Install a Power Steering Pressure Switch on 2000 Jeep Cherokee?
A: In order to take off power steering pressure switch, a container should be placed under the electrical connector and the connector should be disconnected. To avoid bending of the switch, remove it using a backup wrench. Connect the new switch, screw up to 14-22 Nm, reconnect electrical connector and verify the fluid level by adding some.