How to Maintain a Washer Pump on 2000 Jeep Cherokee?

To remove the windshield washer pump, loose the battery, lift the car, and take off the left front inner wheelhouse splash shield. Take the washer fluid out, remove pump connectors and pry the pump out of the reservoir. Change a new grommet seal and invert the process of removal.

OEM 2000 Jeep Cherokee Washer Pump

Windshield Washer Pump

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Washer Pumps found

View related parts
2000 Jeep Cherokee Washer Pump Part Number: 4778347
$130.96 MSRP: $166.02
You Save: $35.06 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Motor - Washer, Windshield; Windshield Washer Pump; Front Washer Pump; Pump Washer, Windshield; Pump, Washer
- Item Weight: 0.60 Pounds
- Item Dimensions: 3.9 x 2.5 x 1.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4778347
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Jeep Cherokee Submodels:
- Classic, Country, Limited, SE, Sport | 4 Cyl 2.5 L GAS, 6 Cyl 4.0 L GAS
View related parts
2000 Jeep Cherokee Washer Pump Part Number: 4778348
Product Specifications
- Other Name: Motor - Washer, Windshield; Windshield Washer Pump; Rear Washer Pump; Pump Washer, Windshield; Pump, Washer
- Item Weight: 0.60 Pounds
- Item Dimensions: 3.1 x 2.5 x 2.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4778348
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Jeep Cherokee Submodels:
- Classic, Country, Limited, SE, Sport | 4 Cyl 2.5 L GAS, 6 Cyl 4.0 L GAS

2000 Jeep Cherokee Washer Pump Parts and Q&A

Q: How to Maintain a Washer Pump on 2000 Jeep Cherokee?
A: To remove the windshield washer pump, loose the battery, lift the car, and take off the left front inner wheelhouse splash shield. Take the washer fluid out, remove pump connectors and pry the pump out of the reservoir. Change a new grommet seal and invert the process of removal.