How to Service an Exhaust Heat Shield on 2000 Jeep Wrangler?

Before you do anything else, raise and support the vehicle to work on the heat shield. Take out the screws or nuts attaching the heat shields to the frame or floor pan. You must remove the muffler front support bracket before you remove the muffler heat shield. Push the shields out onto the exhaust system. Install the heat shields below the floor pan or frame and put the screws or nuts in place, tightening them to 45 Nm (33 ft. lbs.); then position the vehicle to the ground.

OEM 2000 Jeep Wrangler Exhaust Heat Shield

Heat Shield

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Exhaust Heat Shields found

View related parts
2000 Jeep Wrangler Heat Shield, Rear Part Number: 55176205
Product Specifications
- Other Name: Shield - Muffler; Exhaust Heat Shield, Rear; Shield Muffler; Exhaust Heat Shield
- Position: Rear
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 55176205
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2000 Jeep Wrangler Submodels:
- Rubicon, SE, Sahara, Sport, X | 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 4.0 L GAS
View related parts
2000 Jeep Wrangler Heat Shield, Front Part Number: 55176694AF
Product Specifications
- Other Name: Shield - Muffler; Exhaust Heat Shield, Front; Shield Muffler; Exhaust Heat Shield
- Position: Front
- Replaces: 55176694AE
- Item Weight: 7.20 Pounds
- Item Dimensions: 46.8 x 9.2 x 2.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 55176694AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Jeep Wrangler Submodels:
- 65th Anniversary Edition, Rubicon, SE, Sahara, Sport, Unlimited, Unlimited Rubicon, X | 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 4.0 L GAS

2000 Jeep Wrangler Exhaust Heat Shield Parts and Q&A

Q: How to Service an Exhaust Heat Shield on 2000 Jeep Wrangler?
A: Before you do anything else, raise and support the vehicle to work on the heat shield. Take out the screws or nuts attaching the heat shields to the frame or floor pan. You must remove the muffler front support bracket before you remove the muffler heat shield. Push the shields out onto the exhaust system. Install the heat shields below the floor pan or frame and put the screws or nuts in place, tightening them to 45 Nm (33 ft. lbs.); then position the vehicle to the ground.