Other Name: Relay - Mini; PCM Relay; Fan Relay; Accessory Relay(F/R); A/C Clutch; Starter; Fog Light; Fan Relay; Blower Motor Relay; Oxygen Sensor Relay; Mini 5 Terminal Square Relay.
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2000 Jeep Wrangler Submodels:
65th Anniversary Edition, Renegade, Rio Grande, Rubicon, S, SE, Sahara, Sport, Unlimited, Unlimited Rubicon, X | 2.4L L4, 2.5L L4, 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 4.0L L6, 6 Cyl 4.0 L GAS
2000 Jeep Wrangler Fuel Pump Relay Parts and Q&A
Q: How to Locate, Remove, and Reinstall a Fuel Pump Relay on 2000 Jeep Wrangler?
A: Inside the Power Distribution Center (PDC) is the fuel pump relay and it is indicated on the label on the cover. First, remove the PDC cover before you take the relay out of the PDC unit. Examine both sets of terminals to check for any harm or corrosion and repair them prior to replacing the relay. Check to see if all pins are the same height in each terminal and replace or repair any that are not, before installing the connector. When installing, put the relay in the PDC and snap on the PDC cover.