How to Locate and Service a Fuel Pump Relay on 2001 Jeep Wrangler?

The fuel pump relay is positioned in the PDC and can be found by checking the label that's on its lid. First, remove the PDC cover and after that, take the relay out of the PDC. Check the relays and PDC connector terminals to see if they are damaged or corroded and repair them if needed before reattaching the relay. Check that all terminals in the PDC connector have the same pin height and act on repairs when they are needed. During installation, return the relay to the PDC and then attach the PDC cover.

OEM 2001 Jeep Wrangler Fuel Pump Relay

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Fuel Pump Relay found

View related parts
2001 Jeep Wrangler Fuel Pump Relay, Rear Part Number: 4727370AA
$26.96 MSRP: $39.90
You Save: $12.94 (33%)
ADD TO CART
Product Specifications
- Other Name: Relay - Mini; PCM Relay; Fan Relay; Accessory Relay(F/R); A/C Clutch; Starter; Fog Light; Fan Relay; Blower Motor Relay; Oxygen Sensor Relay; Mini 5 Terminal Square Relay.
- Position: Rear
- Replaces: 56006707, 56006709, 4848879AB, 4638094, 68369406AA, 68223712AA
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.3 x 1.4 x 1.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4727370AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2001 Jeep Wrangler Submodels:
- 65th Anniversary Edition, Renegade, Rio Grande, Rubicon, S, SE, Sahara, Sport, Unlimited, Unlimited Rubicon, X | 2.4L L4, 2.5L L4, 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 4.0L L6, 6 Cyl 4.0 L GAS

2001 Jeep Wrangler Fuel Pump Relay Parts and Q&A

Q: How to Locate and Service a Fuel Pump Relay on 2001 Jeep Wrangler?
A: The fuel pump relay is positioned in the PDC and can be found by checking the label that's on its lid. First, remove the PDC cover and after that, take the relay out of the PDC. Check the relays and PDC connector terminals to see if they are damaged or corroded and repair them if needed before reattaching the relay. Check that all terminals in the PDC connector have the same pin height and act on repairs when they are needed. During installation, return the relay to the PDC and then attach the PDC cover.