OEM 2001 Chrysler PT Cruiser Vapor Canister

2001 Chrysler PT Cruiser Vapor Canister Parts and Q&A

• Q: How to Service and Repair a Vapor Canister on 2001 Chrysler PT Cruiser?

  A: Before servicing the Evaporative Emission Control Canister, release the fuel pressure, take off the air cleaner lid and remove the inlet air temperature sensor and makeup air hose. Remove the negative battery cable, get the vehicle raised and stabilized and empty the fuel tank. After that, empty the fuel tank and remove the EVAP system, followed by taking out the push pin and the hoses from the EVAP Aluminum canister. Place the spring clips on the canister's edge and dump it out, past the bracket tabs. Set the EVAP canister onto the bracket tabs, push it back in, let the spring clips snap over the gas tank edge and angle in the push pin to hold everything together. Re attach the pipes and hoses, install the fuel tank and EVAP once more, lower the automobile and link the vehicle's negative battery cord. Then, attach the air cleaner lid, connect the inlet air temperature sensor and makeup air hose, fill the fuel tank and scan your fuel system using the DRB tool.