How to Service and Repair an Oil Pressure Switch on 2001 Dodge Durango?

You should remove the battery's negative cable and use a hoist to raise the vehicle before servicing the oil pressure sensor. Uninstall the front splash shield and unplug the wire for the oil sender plug before you remove the pressure sender. You should first set up the oil pressure sender and then attach the oil pressure sender wire during installation. After that, fit the vehicle's front splash shield again, lift it and then reattach the negative cable to the battery.

OEM 2001 Dodge Durango Oil Pressure Switch

Oil Pressure Sender Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Oil Pressure Switch found

View related parts
2001 Dodge Durango Oil Pressure Sending Unit Part Number: 56031005AB
Product Specifications
- Other Name: Switch - Oil Pressure; Engine Oil Pressure Switch; Oil Pressure Gauge Switch; Oil Pressure Switch
- Replaces: 56031005
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.3 x 1.3 x 3.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56031005AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2001 Dodge Durango Submodels:
- Base, R/T, SLT, SLT Plus, Sport | 3.9L V6, 4.7L V8, 5.2L V8, 5.9L V8, 6 Cyl 3.9 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS

2001 Dodge Durango Oil Pressure Switch Parts and Q&A

Q: How to Service and Repair an Oil Pressure Switch on 2001 Dodge Durango?
A: You should remove the battery's negative cable and use a hoist to raise the vehicle before servicing the oil pressure sensor. Uninstall the front splash shield and unplug the wire for the oil sender plug before you remove the pressure sender. You should first set up the oil pressure sender and then attach the oil pressure sender wire during installation. After that, fit the vehicle's front splash shield again, lift it and then reattach the negative cable to the battery.