How to service an Oil Pressure Switch on 2001 Dodge Neon?

Start the servicing of the oil pressure sender by raising your car and placing a container under the spot of the pressure switch. Unplug the oil pressure switch electrical connector and get rid of the switch. During installation, put in the oil pressure switch and join the electrical connector. Lower the car, then start it and leave it running for no less than 2 minutes. Following that, shut the engine down and look at the engine oil level, adjusting it if it's not correct.

OEM 2001 Dodge Neon Oil Pressure Switch

Oil Pressure Sender Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Oil Pressure Switch found

View related parts
2001 Dodge Neon Switch - Oil Pressure Part Number: 5149098AB
$40.91 MSRP: $55.60
You Save: $14.69 (27%)
ADD TO CART
Product Specifications
- Other Name: SWITCH-OIL PRESSURE
- SKU: 5149098AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2001 Dodge Neon Submodels:
- ACR, Base, ES, High Line, R/T, SE, SRT-4, SXT, Sport | 1.6L L4, 2.0L L4, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS

2001 Dodge Neon Oil Pressure Switch Parts and Q&A

Q: How to service an Oil Pressure Switch on 2001 Dodge Neon?
A: Start the servicing of the oil pressure sender by raising your car and placing a container under the spot of the pressure switch. Unplug the oil pressure switch electrical connector and get rid of the switch. During installation, put in the oil pressure switch and join the electrical connector. Lower the car, then start it and leave it running for no less than 2 minutes. Following that, shut the engine down and look at the engine oil level, adjusting it if it's not correct.