How to service an Oil Pressure Switch on 2002 Dodge Neon?

To service the oil pressure sender, jack up the vehicle and put an oil container underneath the switch. Remove the electrical connector and the switch. Reinstall the switch, re-connect the electrical connector, lower the vehicle, start the engine for 2 minutes and check and correct the oil level as needed.

OEM 2002 Dodge Neon Oil Pressure Switch

Oil Pressure Sender Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Oil Pressure Switch found

View related parts
2002 Dodge Neon Switch - Oil Pressure Part Number: 5149098AB
$40.91 MSRP: $55.60
You Save: $14.69 (27%)
ADD TO CART
Product Specifications
- Other Name: SWITCH-OIL PRESSURE
- SKU: 5149098AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2002 Dodge Neon Submodels:
- ACR, Base, ES, High Line, R/T, SE, SRT-4, SXT, Sport | 1.6L L4, 2.0L L4, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS

2002 Dodge Neon Oil Pressure Switch Parts and Q&A

Q: How to service an Oil Pressure Switch on 2002 Dodge Neon?
A: To service the oil pressure sender, jack up the vehicle and put an oil container underneath the switch. Remove the electrical connector and the switch. Reinstall the switch, re-connect the electrical connector, lower the vehicle, start the engine for 2 minutes and check and correct the oil level as needed.