How to Safely Service an Evaporator Core on 2001 Dodge Ram 2500?

It is very important to take careful steps when working on the evaporator core because air bag deployment can result in a dangerous injury. Start by taking out the heater-A/C housing from the car and splitting it into its halves. Remove the evaporator coil from the housing that sits over the heater-A/C. To set up the new evaporator coil, put it at the bottom of the heater-A/C housing and then attach the remaining hardware and put the housing back into the vehicle. Should you change the evaporator, add 60 ml (2 fl. oz.) of refrigerant oil to the system.

OEM 2001 Dodge Ram 2500 Evaporator

A/C Evaporator Core

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Evaporator found

View related parts
2001 Dodge Ram 2500 Evaporator Core Part Number: 5012534AC
Product Specifications
- Other Name: Evaporato - A/C Evaporator Core Repair Kit; Air Conditioning Evaporator Core.
- Replaces: V9900009AB, 5012534AA, 5011167AA
- Item Weight: 6.00 Pounds
- Item Dimensions: 15.3 x 12.0 x 10.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5012534AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2001 Dodge Ram 2500 Submodels:
- Base | 10 Cyl 8.0 L GAS, 5.9L L6, 5.9L V8, 6 Cyl 5.9 L DIESEL, 8 Cyl 5.2 L CNG, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS, 8.0L V10

2001 Dodge Ram 2500 Evaporator Parts and Q&A

Q: How to Safely Service an Evaporator Core on 2001 Dodge Ram 2500?
A: It is very important to take careful steps when working on the evaporator core because air bag deployment can result in a dangerous injury. Start by taking out the heater-A/C housing from the car and splitting it into its halves. Remove the evaporator coil from the housing that sits over the heater-A/C. To set up the new evaporator coil, put it at the bottom of the heater-A/C housing and then attach the remaining hardware and put the housing back into the vehicle. Should you change the evaporator, add 60 ml (2 fl. oz.) of refrigerant oil to the system.