Other Name: Switch - A/C High Pressure Cut Off; HVAC Pressure Switch; A/C Compressor Cut-Out; Trinary Switch.; Lower Pressure Cut-Off Switch; High Pressure Cut-Off Switch; Switch; Switch A/C High Pressure Cut Off
Item Weight: 0.50 Pounds
Item Dimensions: 1.1 x 1.1 x 2.2 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 4897617AA
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2001 Dodge Ram 2500 Submodels:
Base | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 8 Cyl 5.9 L GAS
2001 Dodge Ram 2500 A/C Compressor Cut-Out Switches Parts and Q&A
Q: How Do A/C Compressor Cut-Out Switches Relate to Low Pressure Sensor Service and Repair on 2001 Dodge Ram 2500?
A: To service the low pressure sensor/switch, begin by taking off the negative connection from the battery. Separate the wire harness connector from the a/c low pressure switch on the top of the accumulator and loosen and remove the switch from the accumulator's fitting, throwing away the O-ring. Install a new O-ring seal on the accumulator fitting after lubricating it with oil recommended for your vehicle's R-134a system, using only the advised special O-rings. Then, put the ac low pressure switch onto the accumulator, hand-tigthen it, attach the wire connector on the switch and lastly connect the battery negative cable back.