How to Remove and Install Front Brake Pads on 2001 Jeep Cherokee?

To remove front disc brake pads, raise the vehicle, remove the wheel and remove the caliper. Take out inboard pad by tilting it out. Secure the caliper, clean it and then reinstall the pads and caliper and lower the vehicle. Pump the brake pedal to bed the pads.

OEM 2001 Jeep Cherokee Brake Pad

Disc Brake Pad Set

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Brake Pads found

View related parts
2001 Jeep Cherokee Brake Pads, Front Part Number: 5191955AA
$132.56 MSRP: $197.00
You Save: $64.44 (33%)
ADD TO CART
Product Specifications
- Other Name: Pad Kit - Front Disc Brake; Disc Brake Pad Set, Front; Disc Brake Hardware Kit; Front Pads; Pad Kit Front Disc Brake
- Position: Front
- Replaces: 4883344AD
- Item Weight: 4.80 Pounds
- Item Dimensions: 4.1 x 5.8 x 8.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5191955AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2001 Jeep Cherokee Submodels:
- Classic, Country, Limited, SE, Sport | 4 Cyl 2.5 L GAS, 4.0L V6, 6 Cyl 4.0 L GAS
View related parts
2001 Jeep Cherokee Brake Pads, Front Part Number: 4778058AC
Product Specifications
- Other Name: Pad Kit - Front Disc Brake; Disc Brake Hardware Kit; Front Pads; Pad Kit Front Disc Brake
- Position: Front
- Item Weight: 4.80 Pounds
- Item Dimensions: 8.5 x 5.4 x 3.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4778058AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2001 Jeep Cherokee Submodels:
- Classic, Country, Limited, SE, Sport | 4 Cyl 2.5 L GAS, 6 Cyl 4.0 L GAS

2001 Jeep Cherokee Brake Pad Parts and Q&A

Q: How to Remove and Install Front Brake Pads on 2001 Jeep Cherokee?
A: To remove front disc brake pads, raise the vehicle, remove the wheel and remove the caliper. Take out inboard pad by tilting it out. Secure the caliper, clean it and then reinstall the pads and caliper and lower the vehicle. Pump the brake pedal to bed the pads.