How Can Brake Drum Machining on a Drum Lathe Prevent Taper and Surface Variation on 2001 Jeep Cherokee?

Brake drums may be machined on a lathe with a limited cut on the lathe of from 0.12 - 0.20 to prevent taper, and finally 0.025 to 0.038 to achieve good finishing. Securely mount the drum and use a damper strap to reduce vibration. Change the drum when the machining is greater than the maximum diameter.

OEM 2001 Jeep Cherokee Brake Drum

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Brake Drums found

View related parts
2001 Jeep Cherokee Drum, Rear Part Number: 52005350AC
Product Specifications
- Other Name: Drum - Brake; Brake Drum, Rear; Brake Drum
- Position: Rear
- Replaces: 52005350
- Item Weight: 14.90 Pounds
- Item Dimensions: 12.5 x 11.7 x 4.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52005350AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2001 Jeep Cherokee Submodels:
- Base, Briarwood, Classic, Country, Laredo, Limited, Pioneer, SE, Sport | 2.1L L4, 2.5L L4, 4 Cyl 2.5 L GAS, 4.0L L6, 6 Cyl 4.0 L GAS
View related parts
2001 Jeep Cherokee Brake Drum Part Number: 52007502AB
Product Specifications
- Other Name: Drum - Brake; Drum
- Item Weight: 17.10 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52007502AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2001 Jeep Cherokee Submodels:
- Base, Briarwood, Classic, Country, Laredo, Limited, SE, Sport | 4 Cyl 2.5 L GAS, 6 Cyl 4.0 L GAS

2001 Jeep Cherokee Brake Drum Parts and Q&A

Q: How Can Brake Drum Machining on a Drum Lathe Prevent Taper and Surface Variation on 2001 Jeep Cherokee?
A: Brake drums may be machined on a lathe with a limited cut on the lathe of from 0.12 - 0.20 to prevent taper, and finally 0.025 to 0.038 to achieve good finishing. Securely mount the drum and use a damper strap to reduce vibration. Change the drum when the machining is greater than the maximum diameter.